Sunbeam 2356 User manual

Instruction Manual

DELUXE MIXMASTER®MIXER

Mode d'Emploi

BATTEUR DELUXE MIXMASTER®

Manual de Iinstrucciones

BATIDORA MIXMASTER® DELUXE

Instruzioni per l'Uso

DELUXE MIXMASTER®MIXER

Gebrauchsanleitung

DELUXE MIXMASTER®MIXER

Anvandarhandledning

DELUXE MIXMASTER®MIXERN

■

2356, 2358, 2359 &2360

When using electrical appliances, basic safety precautions should always

be followed including the following:

1. Read all instructions before using the Mixer.

2. To protect against risk of electrical shock, do not put Mixer in water or

other liquid. This may cause personal injury or damage to the product.

3. Close supervision is necessary when Mixer is used by or near children,

or incapacitated persons.

4. Unplug from outlet while not in use, before putting on or taking off parts

and before cleaning.

5. Avoid contacting moving parts. Keep hands, hair, clothing, as well as spatulas

and other utensils away from beaters during operation to reduce the risk

of injury to persons and/or damage to the Mixer.

6. If the power supply cord of this appliance is damaged, it must only be

replaced in a repair shop appointed by the manufacturer, because

special tools are required.

7. The use of attachments not recommended or sold by Sunbeam may cause fire,

electrical shock or injury.

8. Do not use outdoors or for commercial purposes.

9. Do not let cord hang over edge of table or counter or touch hot surfaces,

including the stove.

10. Remove beaters from Mixer before washing.

IMPORTANT SAFEGUARDS

11,

Do not place Mixer or bowls on or near a hot gas or

electric burner, or in a heated oven.

12. Do not use Mixer for other than intended use.

13. Do not leave Mixer unattended while it is operating

THIS

UNIT FOR

HOUSEHOLD

USE

ONLY

When your Mixmaster” Mixer is first used,

you

may

experience

an odor and possibly a slight wisp of smoke from your mixer

motor.

This is

caused

the

heat curing of the insulation which protects the

motor

and is normal. After the first few uses, this

effect

will disappear.

FOR PROOUCTS PURCHASEO IN U.S

CANADA ONLY:

reduce the risk of electrical shock, this appliance

has a polarized plug

(one

blade is wider than the other). As a

safety feature, this plug will fit in a polarized plug only

one

way.

If the plug does not fit fully in the outlet: reverse the plug.

If it

still

does not fit, contact a qualified electrician.

00 NOT ATTEMPT TO OEFEAT THIS SAFETY FEATURE.

1. Beater Ejector

2. Large Mixing Bowl

3. Small Mixing Bowl

4. Bowl-Fit Beaters

5. Turntable

6. Dough Hooks

7. Stand

8. Worklight*

9. Mixer-Release Trigger

10. Mix-Finder®Dial

11. Mixing Guide

*Some models do not have

the worklight feature.

EATURES

Thank you for choosing the Sunbeam®

Deluxe Mixmaster

Mixer. For generations

have been helping cooks prepare moist

cakes, light and fluffy meringue, and chewy

cookies. You can even make bread with your

Sunbeam®Deluxe Mixmaster®Mixer.

The Sunbeam®Deluxe Mixmaster®

Mixer offers you a choice of 12 different

mixing speeds. The bowl-fit beaters

and bowls have been designed to mix

ingredients thoroughly and evenly.

The Mix-Finder

dial tells you at a glance

which mixing speed to use. No problem

ejecting the beaters either – just push

the ejector button beside the handle.

When making bread, the Sunbeam®

Deluxe Mixmaster®electronically

controls the speed of the dough hooks

to deliver just the right power for proper

kneading action.

You’ll love being able to make so many

things with your mixer!

SSEMBLING THE

TAND

IXER

Before assembling the mixer, be

sure the Mix-Finder®dial is in the

ZERO position and the electric cord

is unplugged.

TTACHING THE

URNTABLE

Place the revolving turntable into

the base of the stand using the socket

corresponding to the size of the bowl.

TTACHING THE

IXER

EAD

Press in on the mixer-release trigger,

located at the rear of the stand.

For models equipped with a head lock

feature – While pressing in on the

mixer-release trigger, press in on the

head-lock latch. This is best

accomplished by using the thumb and

forefinger of the same hand and

pressing inward.

This will open the top of the stand to

receive the mixer head. Place the mixer

head on the top of the stand so that the

metal pivot, located on the bottom of

the mixer head, goes into the open

groove on the top of the stand.

As you release the mixer-release trigger,

the top of the top of the trigger should

clamp around the metal pivot.

For models equipped with a head-lock

feature–To lower the mixer-head for

normal operation, support the mixer

head with one hand. Then press in on

the head-lock latch. Gently lower the

mixer head until the mixer head is in a

normal operating position.

Be sure the mixer head is securely

attached to the stand before using.

NOTE: This mixer is NOT intended

for use away from the stand.

DDING THE

IXING

OWL

Place the desired mixing bowl onto

the turntable so that the groove in the

bottom of the bowl fits into the correct

groove in the turntable.

Mixing bowls should NEVER be used in

a conventional oven, microwave oven,

on top of the range, or on any other

heated surface.

NOTE: If mixing bowls are scratched

or chipped, do not use mixer. Mixer

bowl should not be used to blend in

hot liquids.

Mixer-Release

Trigger

Latched Opening

Ball Bearing

Extension

Small

Bowl Large

Bowl

Mixer

Head

Mixer-Release

Trigger

Metal

Pivot

Stand

Attaching the Beaters

Be sure the Mix-Finder®dial is in the

ZERO position and unplug electric cord

from the electrical outlet.

Lift mixer head up and back to pull it

out of the way of the bowl, while

holding in an upright position.

NOTE: It is important that the beaters go

into the correct sockets. Otherwise the

mixer will not give you the proper

mixing action. Do not risk ruining a

recipe or damaging your mixer. Read

the following instructions carefully.

One of the beaters is conical in shape

and has a nylon button on the bottom.

It goes into the socket on the side of

the mixer nearest the side of the bowl.

The other beater is square-shaped and

goes into the socket nearest the center

of the bowl. See beater symbols located

on the front of the mixer head.

Insert the beaters, one at a time,

using a combination pressing and

twisting motion, until the beaters

snap into position.

If a beater should not properly snap

into place, pull it out of the socket

and rotate it one quarter turn.

Reinsert the beater into the socket

until it snaps into position.

Attaching the Dough Hooks

Set the Mix-Finder®dial in the OFF

position and unplug the electric cord

from the electrical outlet.

Lift mixer head up and back to tilt it out

of the way of the bowl, while holding in

an upright position.

NOTE: The dough hooks must go into

the correct sockets. The mixer will

operate with the dough hooks in the

wrong position. However, you will not

get proper kneading action and you

could risk ruining a recipe or damaging

your mixer. Read the following

instructions carefully.

Nylon

Button

Square

Beater

Conical-Shaped

Beater

Side of

Bowl

Conical

Beater Square

Beater

The dough hook with the small washer

and foot goes into the socket on the

side of the mixer nearest the side of

the bowl. The other dough hook with

the large washer goes into the socket

nearest the center of the bowl. See the

dough hook symbols located on the

front of the mixer head.

Beater-Bowl Drive Adjustment

Automatic bowl rotation is factory set.

Occasionally, a simple adjustment

may be necessary when the bowl

fails to rotate.

To make this adjustment, tilt the mixer

head back. Hold the mixer head in an

upright position and locate the

adjustment screw on the underside

of the mixer head. Loosen the locking

nut and turn the adjustment screw on

the underside of the mixer head.

Loosen the locking nut and turn the

adjustment screw clockwise, to lower

the mixer head; or counter clockwise,

to raise the mixer head. Retighten the

locking nut. The beater with the nylon

button should lightly touch the bottom

of the mixing bowl.

About the Worklight Feature

Some of our models have a

worklight that lights the area

inside the mixing bowl.

As soon as the electric cord is

plugged in, the worklight will glow.

It will continue to glow until the

electric cord is unplugged from

the electrical outlet.

Operating Instructions

About the Mix-Finder® Dial

The Mix-Finder®dial is used for turning

the mixer ON and OFF and for selecting

its 12 mixing speeds.

Rotate the Mix-Finder

dial in a clockwise

direction, to increase mixing speed;

and in a counterclockwise direction,

to decrease mixing speed.

As you rotate the Mix-Finder®dial,

notice that a numbered speed

is aligned with the indicator on top

of the mixer head. This numbered

speed indicates the speed at which

the mixer is operating.

Rotate the Mix-Finder®dial until the

indicator is opposite the numbered

speed you wish to use.

Adjustment

Screw Locking

Nut

Worklight

Speed

Indicator

Mixing

Guide

Mix-Finder®

Dial

NOTE: Due to variations in ingredient temperatures and quantities, the Mixing Guide

speeds are only suggested. If necessary, adjust speeds as needed to achieve

desired results.

Mixing Guide

The mixing guide on your mixer has been designed to help you take the guess work

out of preparing foods.

Next to each of the numbered speeds on the Mix-Finder®dial are descriptions

of the mixing task best suited to that mixing speed. Use those descriptions as

a mixing guide when preparing your favorite recipes.

Speed Mixing

Setting Guide Example

1 Fold-Kneaded Use when mixing dry ingredients or when folding

two portions of a recipe together, such as a beaten

egg white into a batter or when directions call for

LOW speed. Use for kneading bread.

2 Stir Use when stirring liquid ingredients or when gentle action

is needed to moisten dry ingredients.

3 Blend Use when quick breads require a brisk action,

just enough to blend ingredients but not enough

to develop a smooth batter.

4 Mix Use when mixing dry ingredients and liquid ingredients

together alternately in a recipe.

5 Combine Use when recipe calls for combining ingredients together.

6 Cake Mixes Use when preparing packaged cake mixes or

when directions call for MEDIUM speed.

7 Cream Use when creaming sugar and butter together.

8 Whip Use to whip potatoes or to develop a smooth batter.

9 Whip/Cream Use to whip whipping cream or to develop a light,

fluffy texture.

10 Desserts Use to beat air into whipped desserts.

11 Frostings Use when preparing light, fluffy frostings and candies.

12 Egg Whites Use when aerating eggs and egg whites.

Use when directions call for HIGH speed.

CARING FOR YOUR MIXER

JECTING THE

EATERS OR

OUGH

OOKS

After you’ve finished mixing, turn the

Mix-Finder®dial to OFF and unplug the

electric cord from the electrical outlet.

Push the ejector button located near

the handle to remove beaters or

dough hooks.

Scrape excess batter off the beaters

using a rubber or plastic spatula. Do not

strike beaters on the rim of the bowl.

LEANING

OUR

IXER

To clean the mixer, wipe the mixer head,

stand, and turntable with a damp cloth,

then dry. DO NOT IMMERSE THE

MIXER HEAD OR STAND IN WATER.

Avoid the use of abrasive cleaners, as

they may mar the finish of the mixer.

Wash the beaters and bowls in hot,

soapy water after each use. Rinse

thoroughly and dry. Beaters and

bowls may also be washed in an

automatic dishwasher.

ARE AND

LEANING OF THE

ORKLIGHT

(For models with worklight feature only.).

The worklight bulb should be replaced

as soon as it burns out. You may also

wish to remove the worklight lens

periodically for cleaning.

To remove the worklight lens, place

the Mix-Finder®dial in the ZERO position

and unplug mixer from electrical outlet.

Remove beaters or dough hooks

from mixer sockets and remove

bowl from turntable.

Holding the mixer head in an upright

position, use a small screwdriver to

remove the screw holding the

worklight lens in place.

Squeeze the worklight lens, as shown,

until the tabs on the lens clear the

housing. Tilt the worklight lens down

and out of the housing.

To clean the worklight lens, wash in

warm, soapy water. Rinse and dry

thoroughly.

To replace the worklight bulb, unscrew

from socket. Replace with new bulb.

NOTE: Replacement bulbs may be

purchased from local hardware or

department stores or from your

nearest authorized Sunbeam Service

Center (6 watt maximum bulb

can be used.)

To replace the worklight lens,

repeat the steps described in

“To remove the worklight lens”

in reverse order.

TORING

OUR

IXER

Store the mixer in a dry location,

such as on a counter top or table top,

or in a closet or cupboard.

Place the small mixing bowl inside

the large mixing bowl with the beaters

inserted into the proper sockets.

Place the dough hooks in the

small mixing bowl. Store the bowls

on the turntable. The beaters will help

hold the bowls in position. Wind the

electric cord into a coil, secure it

with a twist fastener.

AINTENANCE

The motor of your stand mixer has

been carefully lubricated at the

factory and does not require

any additional lubricant.

Other than the recommended

cleaning and worklight replacement,

no further user maintenance

should be necessary.

Return the mixer to the nearest

Sunbeam Service Center for

servicing or repairs.

MIXING AND BAKING SUGGESTIONS

• Ingredients should be added to the

mixing bowl as they are specified in

the recipe. When combining dry

and wet ingredients, you may wish

to moisten ingredients on Speed 1

or 2, then turn to the desired

mixing speed.

• Use the mixing speed that is

recommended in the recipe. When

using a recipe that is not in this book,

use the handy mixing guide on the

Mix-Finder®dial of the mixer to help

you find the correct speed to use.

• If times are specified in the recipe,

use them! BE CAREFUL NOT TO

OVERMIX. Overmixing can cause a

mixture to become very tough.

• Should an object, such as a spatula,

fall into the bowl while the mixer is

operating, turn the mixer off

immediately. Then, remove the object.

• Remove beaters and place in sink

for easy clean-up.

• When preparing your favorite

recipe, DO NOT exceed 3-1/2 cups

of flour grain in a recipe.

This manual suits for next models

Table of contents

Languages:

Other Sunbeam Mixer manuals

Sunbeam

Sunbeam Planetary Mixmaster MX7900B User manual

Sunbeam

Sunbeam StickMaster SM6200 User manual

Sunbeam

Sunbeam MIXMASTER 2345 User manual

Sunbeam

Sunbeam FPSBSM210X User manual

Sunbeam

Sunbeam MIXMASTER AUTOMATIC 1 User manual

Sunbeam

Sunbeam Mixmaster 2370 Series User manual

Sunbeam

Sunbeam MX6800 Retro Mixmaster User manual

Sunbeam

Sunbeam Fiesta Folding Mixmaster MX1000P User manual

Sunbeam

Sunbeam Mixmaster MX7700 Operational manual

Sunbeam

Sunbeam Mixmaster Combo Pro MXP1000WH User manual

Sunbeam

Sunbeam FPSBSM3481 series User manual

Sunbeam

Sunbeam Mixmaster 2556 User manual

Sunbeam

Sunbeam StickMaster Platinum User manual

Sunbeam

Sunbeam Mixmaster MX7700 User manual

Sunbeam

Sunbeam MixMaster FPSBSM2101 User manual

Sunbeam

Sunbeam MIXMASTER 2372 User manual

Sunbeam

Sunbeam Planetary Mixmaster The Tasty One User manual

Sunbeam

Sunbeam MX9500 Operational manual

Sunbeam

Sunbeam Mixmaster MX8500 User manual

Sunbeam

Sunbeam Mixmaster User manual

Sunbeam

Sunbeam Mixmaster 2395 User manual

Sunbeam

Sunbeam Mixmaster MX003 User manual

Sunbeam

Sunbeam Mixmaster MX8900W Operational manual

Sunbeam

Sunbeam MIXMASTER 2366 User manual

Popular Mixer manuals by other brands

Bosch

Bosch GRW 9 manual

MULTIQUIP

MULTIQUIP Whiteman WM45E Operation and parts manual

KitchenAid

KitchenAid KSM7581BZ0 Instructions and recipes

Jay-Lor

Jay-Lor 5050 owner's manual

MULTIQUIP

MULTIQUIP Whiteman MC94S Operation and parts manual

Thinky

Thinky ARE-250 instruction manual

Midas

Midas XL4 manual

bianco

bianco PURO 4 manual

Paso

Paso DAG9200 manual

Sima

Sima SFX-9A user manual

better chef

better chef IM-815WC Use and care book

ALLEN & HEATH

ALLEN & HEATH GR1 user guide

Lacor

Lacor 69083 Instructions for use and maintenance

M-Audio

M-Audio Midiman SAM manual 

Buffalo

Buffalo CP921 instruction manual

Pentair

Pentair HYPRO Cleanload 3376-0870 Original instruction

Cuisinart

Cuisinart SM50WHE manual

Hobart

Hobart HCM-300 instruction manual