Summers CoulterChisel CC2815 User manual

See www.summersmfg.com for the latest version of all Summers Operator’s Manuals.

Operator’s

Manual

CC2815, CC2835, CC2830

DC2815, DC2835, DC2830

(CoulterChisel & DiskChisel)

SUMMERS MANUFACTURING CO., INC.

WEB SITE: www.summersmfg.com

DEVILS LAKE, NORTH DAKOTA 58301............................... (701) 662-5391

8Z1095 © Summers Mfg. Co., Inc. 2017 Printed in USA

IMPORTANT

THE OPERATOR IS RESPONSIBLE

FOR ADJUSTING THE MACHINE SINCE

MACHINE DOES NOT COME “FIELD

READY” FROM FACTORY.

COULTER-CHISEL

DISK-CHISEL

COULTER-CHISEL

DISK-CHISEL

CAUTION

READ & UNDERSTAND OPERATOR’S

MANUAL BEFORE USING MACHINE.

2009 and newer

Warranty

Summers warrants only products of its manufacture against operational failure caused by defective materials

or workmanship which occur during normal use within 36 months from the date of purchase by the end user from

Summers’ dealer.

Summers’ obligation is to replace free of charge any part of any product that Summers inspection shows to

be defective excluding transportation charges to Devils Lake, ND and return and also excluding all transportation

costs from Summers’ dealer to the dealer’s customer and all other costs such as removal and installation expense.

Summers shall not be liable for loss of time, manufacturing costs, labor, material, loss of prots, consequential

damages, direct or indirect, because of defective products whether due to rights arising under the contract of sale

or independently thereof, and whether or not such claim is based on contract, tort or warranty.

Written permission for any warranty claim return must be rst obtained from authorized Summers’ personnel.

All returns must be accompanied with a complete written explanation of claimed defects and the circumstances of

operational failure.

Written warranty for all component parts used in the manufacture of Summers products is available upon

request. Warranty of such component parts will be determined by said component manufacturer upon their inspec-

tion of the claimed defective part.

This express warranty is the sole warranty of Summers. There are no warranties, which extend beyond the

warranty herein expressly set forth. The sales for products of Summers under any other warranty or guarantee

express or implied is not authorized. This warranty voids all previous issues.

SUMMERS MANUFACTURING CO. INC.

DEVILS LAKE, NORTH DAKOTA 58301

01/16

Publish Date 12/7/2017

INTRODUCTION

This manual provides the following information about your Summers Coulter-Chisel and Disk-Chisel.

SECTION CONTENTS

Section 1 – SAFETY explains important safety precautions and familiarizes the Operator with the

decals and their locations.

Section 2 – ASSEMBLY includes step by step assembly instructions.

Section 3 – COULTER-CHISEL & DISK-CHISEL OPERATION provides necessary information for

the operation and adjustment of the machine.

Section 4 – MAINTENANCE covers recommended mechanical maintenance.

Section 5 – TROUBLESHOOTING provides a quick reference to solving problems. SPECIFICATIONS

lists important dimensions, capacities and other technical information.

Section 6 – PARTS

OTHER ITEMS OF IMPORTANCE

A. Summers Mfg. Co., Inc. strongly recommends that each Coulter-

Chisel Operator READ and UNDERSTAND the Operator’s Manual

before using the machine. In addition, this Operator’s Manual

should be REVIEWED at least ANNUALLY thereafter.

B. It is the policy of this company in improve its products whenever

possible and practical to do so. We reserve the right to make

changes or improvements in the design or construction of parts

at any time without incurring obligations to install such changes

on products previously delivered.

C. Reference to “right” and “left” in this manual is determined when

machine is viewed from the rear.

D. Parts are referenced in each drawing with the Summers Manufacturing Part Number. Use this Part

Number when ordering replacement parts from your Summers dealer. See back section of manual

for description of each Part Number.

OWNER REGISTER

Name____________________________________ Size _________________________________________

Address _________________________________ Serial Number _______________________________

City _____________________________________

State/Prov. ______________________________ Date Purchased______________________________

Mail Code________________________________ Dealer_______________________________________

(located by the hitch piece)

Scan code below for

the latest version of all

Summers Operator’s Manuals.

TABLE OF CONTENTS

SECTION 1 – SAFETY

Safety-Alert Symbol............................................................................................................................................. 1-1

General Safety Practices..................................................................................................................................... 1-1

Safety During Transport...................................................................................................................................... 1-2

Safety Decals ..................................................................................................................................................... 1-2

Decals and Their Locations....................................................................................................................... 1-2 – 1-6

SECTION 2 – ASSEMBLY

General Assembly Instructions............................................................................................................................ 2-1

Safety Alert Symbol ............................................................................................................................................. 2-1

General Safety Practices..................................................................................................................................... 2-2

Set-Up of 16’ & 20’...................................................................................................................................... 2-3 – 2-7

Set-Up of 24’ thru 28’................................................................................................................................ 2-8 – 2-18

Set-Up of 32’ and 40’.............................................................................................................................. 2-19 – 2-32

Hydraulic Set-Up .................................................................................................................................... 2-33 – 2-51

Installation of Shanks and Coulter Gangs .............................................................................................. 2-52 – 2-72

Gang Assembly ................................................................................................................................................. 2-53

Blade Assembly................................................................................................................................................. 2-71

Decals/Options .................................................................................................................................................. 2-72

SECTION 3 – OPERATION

Operation Safety.................................................................................................................................................. 3-1

Steps Prior to Operation...................................................................................................................................... 3-1

Initial Hookup.............................................................................................................................................. 3-2 – 3-5

Field Operation......................................................................................................................................... 3-6 – 3-11

Transporting............................................................................................................................................ 3-11 – 3-12

Unhooking From Tractor.................................................................................................................................... 3-12

SECTION 4 – MAINTENANCE

Maintenance Safety............................................................................................................................................. 4-1

Maintenance for after the First Day and Week of Operation ............................................................................... 4-1

Daily Maintenance............................................................................................................................................... 4-2

Periodic Maintenance.......................................................................................................................................... 4-2

Storage................................................................................................................................................................ 4-2

SECTION 5 – TROUBLESHOOTING AND SPECIFICATIONS

Troubleshooting & Specications ........................................................................................................................ 5-1

Width, Height, Weight.......................................................................................................................................... 5-2

Tire Specications ............................................................................................................................................... 5-2

SECTION 6 – PARTS

16’ & 20’ Center ................................................................................................................................................... 6-2

16’ & 20’ Hitch & Lift ............................................................................................................................................ 6-3

16’ & 20’ Gang Depth Control Hydraulics ............................................................................................................ 6-4

16’ & 20’ Depth Control Hydraulics...................................................................................................................... 6-5

16’-28’ Hydraulic Hitch......................................................................................................................................... 6-6

24’-28’ Centers .................................................................................................................................................... 6-7

24’-28’ Cylinder Lifts ............................................................................................................................................ 6-8

24’-28’ Transport Assembly ................................................................................................................................. 6-9

24’-28’ Hitch and Cylinder Locks ....................................................................................................................... 6-10

24’-28’ Wing........................................................................................................................................................6-11

24’-28’ Wing Transport Assembly ...................................................................................................................... 6-12

24’-28’ Gang Tube Mounting ............................................................................................................................. 6-13

28’ Wing Extension............................................................................................................................................ 6-14

24’-28’ Depth Control Hydraulics....................................................................................................................... 6-15

24’-28’ Wing Lift Hydraulics ............................................................................................................................... 6-16

32’-40’ Center Section ....................................................................................................................................... 6-17

32’-40’ Center w/ Lift.......................................................................................................................................... 6-18

32--40’ Caster Wheel Assembly ........................................................................................................................ 6-19

32’-40’ Center w/ Hitch and Locks..................................................................................................................... 6-20

32’-40’ Wing Assembly ...................................................................................................................................... 6-21

Gauge Wheel Assembly .................................................................................................................................... 6-22

32’-40’ Transport.....................................................................................................................................6-23 & 6-24

32’-40’ Wing Lift Hydraulics ............................................................................................................................... 6-25

Safety Light Kit .................................................................................................................................................. 6-26

Trip Assembly .................................................................................................................................................... 6-27

Coulter Gang Components................................................................................................................................ 6-28

Coulter Gang Mount Components..................................................................................................................... 6-29

Disk Blade Assembly......................................................................................................................................... 6-30

Rear Hitch.......................................................................................................................................................... 6-31

Hub and Axle Components................................................................................................................................ 6-32

614 Hub and GBGI Seal.................................................................................................................................... 6-33

Mounted Harrow Mounting Arm Assembly ........................................................................................................ 6-34

Mounted Harrow Assembly................................................................................................................................ 6-35

16’ Mounted Harrow Layout .............................................................................................................................. 6-36

20’ Mounted Harrow Layout .............................................................................................................................. 6-37

24’ Mounted Harrow Layout .............................................................................................................................. 6-38

26’ Mounted Harrow Layout .............................................................................................................................. 6-39

28’ Mounted Harrow Layout .............................................................................................................................. 6-40

32’ Mounted Harrow Layout .............................................................................................................................. 6-41

36’ Mounted Harrow Layout .............................................................................................................................. 6-42

40’ Mounted Harrow Layout .............................................................................................................................. 6-43

Parts List..................................................................................................................................................... 7-1 – 7-8

iii

NOTES

SECTION 1 - SAFETY

SAFETY-ALERT SYMBOL

This symbol is used to denote possible danger and

care should be taken to prevent bodily injury.

This symbol means:

ATTENTION! BECOME ALERT!

YOUR SAFETY IS INVOLVED!

Denition of each Signal Word used in conjunction with the Safety-Alert symbol.

indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury. This signal word is to limited to the most extreme situations.

indicates a potentially hazardous situation which, if not avoided, could result in death

or serious injury.

indicates a potentially hazardous situation which, if not avoided, may result in minor

or moderate injury. It may also be used to alert against unsafe practices.

GENERAL SAFETY PRACTICES

1. READ AND UNDERSTAND Operator’s Manual before using machine. Review at least annually thereafter.

2. VERIFY all safety devices and shields are in place before using machine.

3. KEEP hands, feet, hair and clothing away from moving parts.

4. STOP engine, place all controls in neutral, set parking brake, remove ignition key and wait for all

moving parts to stop before servicing, adjusting, maintaining or unplugging.

5. BE CAREFUL when working around high pressure hydraulic system.

6. ALWAYS make sure that pressure is relieved from hydraulic circuits before servicing or disconnecting from

tractor.

7. DO NOT ALLOW RIDERS.

8. USE EXTREME CARE when making adjustments.

9. KEEP CHILDREN AWAY from machinery at all times.

10. NEVER ALLOW anyone to walk or work under a raised piece of equipment without installing cylinder and

transport locks.

DANGER

WARNING

CAUTION

1-1

SECTION 1 - SAFETY

SAFETY DURING TRANSPORT

1. ONLY TOW at a safe speed. Use caution when making corners or meeting trafc.

2. USE a safety chain between tractor drawbar and implement hitch when transporting on

public roads.

3. ALWAYS use hydraulic cylinder transport locks when transporting on public roads.

4. FOLLOW ALL local laws governing transporting of farm machinery.

5. Frequently check for trafc from rear, especially during turns.

SAFETY DECALS

1. KEEP SAFETY DECALS CLEAN.

2. REPLACE missing or unreadable decals. New decals are available from your Summers

dealer by ordering correct part number (PN) located on the decal.

DECALS AND THEIR LOCATIONS

1. PN 8Z0075 – DECAL FOR REMOVING TRANSPORT LOCKS

2. PN 8Z0087 – DECAL FOR PINCH POINT HAZARD

1-2

SECTION 1 - SAFETY

3. PN 8Z0202 – DECAL FOR COMPANY IDENTIFICATION

4. PN 8Z0276 – DECAL FOR GENERAL CAUTION

5. PN 8Z0340 – DECAL FOR REPHASING CYLINDERS

1-3

SECTION 1 - SAFETY

6. PN 8Z0342 – DECAL FOR INSTALLING CYLINDER LOCKS

7. PN 8Z0344 – DECAL FOR STAYING CLEAR OF WINGS

8. PN 8Z0346 – DECAL FOR ELECTROCUTION DANGER

9. PN 8Z0348 – DECAL FOR GAUGE WHEEL DEPTH

10. PN 8Z0800 – AMBER REFLECTOR

11. PN 8Z0805 – RED-ORANGE REFLECTOR

12. PN 8Z0810 – RED REFLECTOR

1-4

This manual suits for next models

Table of contents

Other Summers Tiller manuals

Summers

Summers VRT Renegade User manual

Popular Tiller manuals by other brands

MTD

MTD 410R parts list

Craftsman

Craftsman 247.29931 Operator's manual

MTD

MTD FRT Series Operator's manual

Craftsman

Craftsman 917.298353 owner's manual

Troy-Bilt

Troy-Bilt Colt FT Operator's manual

Ryobi

Ryobi 510r Operator's manual

MTD

MTD OHV Series Original operating instructions

YAT

YAT YT5601-01 Assembly, Use, Maintenance Manual

Craftsman

Craftsman 917.296010 owner's manual

Troy-Bilt

Troy-Bilt OEM-290-260 Operator's manual

Scheppach

Scheppach MTP560 Translation from the original instruction manual

GARDEN WAY

GARDEN WAY 12194 owner's manual

Classen

Classen STAND-AER SA-25 Operator's manual and parts list

Craftsman

Craftsman 850 Series owner's manual

DR PILOT 2 Safety & Operating Instructions

Altrad

Altrad ATIKA BH 1400 N Original instructions, safety instructions, spare parts

WIL-RICH

WIL-RICH 2500 Operator's manual

Viking

Viking HB 685 instruction manual