sumas SM-30BT Mounting instructions
SM-30BT
USER OPERATION MANUAL
TABLE OF CONTENTS
Safety Information …….………………………………………………………… 1
Park/Brake wire ………………………………………………………………….. 1
Installation/Removal ……….………………………………………………….. 2
Playable Disc, DVD Care, MP3 ……….…………………………………….. 3
Maintenance …………………………………………………………………….… 3
Replacing Remote Control Battery ………….…………………………….. 3
Remote Control …………………………………………………………………... 4
Remote Control Functions ……………………………………………………. 5
Front Panel ………………………………………………………………………… 6
Front Panel Functions …………………………………………………………. 7
Basic Setup …..…….……………………………………………………….….... 8-9
Bluetooth ………………………………………………………………………….. 10
Radio Mode ……………………………………………………………………….. 10
Music/MP3 Mode ……………………………………………………………….. 11
DVD Mode …………………………………………………………………………. 11
USB Mode …………………………………………………………………….……. 11
Auxiliary Mode (Input) …………………………………………………………. 11
Trouble Shooting …………………………………………………………..……. 12
Specification ………..…………………………………………………………….. 13
Accessories ………………………………………………………………….…..… 14
Safety Information
Please read this manual thoroughly and keep in your vehicle for easy future reference.
We highly recommend that you find a licensed professional installer for the installation of
this product, it is illegal to watch DVD player while driving.
CAUTION: This unit is a class 1 Laser Product. To prevent direct exposure to Laser
system, DO NOT OPEN the unit. The Laser Beam may hurt or damage your eyes. If the
unit requires adjustments, please contact Sumas Media.
USE THIS PRODUCT SAFELY
Make sure you fully understand the following safety information:
When Driving
Keep the unit at an appropriate sound level. Driving with the sound at a level that
prevents you from hearing the sounds outside and around the car may cause an
accident.
When cleaning your interior
Do not expose the product to any type of liquid or excessive moisture. This could cause
short circuit, fire or other severe damage to the unit or you vehicle.
When Parked
Parking in direct sunlight, especially in the summer time can produce very high
temperature inside you vehicle. This may cause the unit to not work properly. Let the
interior of your car to cool down before turning on the unit.
Note:
Do
not
use
or
store
player
in
dusty,
high
temperature
or
high
humidity
environments.
Park wire/Brake wire
Park wire is to connect to your parking brake (Hand brake) or your unit will not function,
also for your safety; when car is operate will restrict you to play/watch DVD while driving,
display shows: safety off, do not play DVD,
But some make or model of automobile if you have problem to connect to your brake,
you can also ground this wire to your car’s chassis, unit will play; but restriction will be
disabled, so please do not watch your unit when driving!
Replacing the Fuse
When replacing the fuse, be sure to use one matching the amperage rating stated on the
original fuse.
WARNING!
NEVER replace any Fuse with higher amperage
than the original. This may cause damage to your
unit and/or your vehicle’s electrical wiring.
1
Installation
Note: Remove the protection screws (A)
before installing and operation the unit.
Please find the front panel inside carry caddy. Reinstall panel by placing as
flipped down position, insert panel left side into front adaptor first, then gently
click right side into place. When completed correctly panel should be flip up in
place.
To remove the panel, gently pull out the right side first after flipped down.
oThis unit is designed for 12V DC, (connecting to other than 12V unit will be damage)
negative ground operation system only.
oWhen replacing a fuse, be sure to match the amperage as the original fuse. Using the
wrong fuse may cause your unit not to function or even electrical shortage
oThe negative battery terminal must be disconnected before making connections, which
can prevent damaging the unit due to short circuit.
oBe sure to connect the color coded leads correctly according to the wiring diagram.
Incorrect connections may cause damage or malfunction or even damage the vehicle’s
electrical system.
oBe sure to connect the speaker (-) leads to the speaker (-) terminal, and the speaker
(+) leads to the speaker (+) speaker terminal and so on. Never cross connect the left /
right channel speaker cables or to the vehicle body/frame.
oDo not block the unit’s vents or heat sink. Blocking can cause heat to build up inside
and may damage your unit.
oAfter the completion of the installation. Reconnect negative cable of vehicle to the (-)
battery terminal, and then press the RESET in the front panel with the push pin to set
the unit to initial status. Please refer below. ( see picture below)
Unit Reset
Unit Installation & Removal
2
Maintenance
Playable discs
DVD, Video CD and CD discs that display the logos shown below can be played back on this unit.
DVD video disc region numbers:
(This unit is for region one ONLY)
If you encounter region problems, please call toll free service number on back page, we will help you resolve if.
DVD Care
If you use an irregular disc it may jam the DVD player or not play, for this reason only use round discs
Be sure to check all discs for cracks and scratches before playing, discs in those conditions will not play properly.
Also, be sure to avoid touching the recorded (plain) side of the disk, avoid scratching the disc. Store CDs in case when not in use.
Keep discs out of direct sunlight (it will cause them to warp andcrack) to clean the CDs, wipe with a soft cloth from the inside of
the disc outward.
MP3
MP3 files on CD-ROM, CD-R and CD-RW are compatible with this unit.
Discs compatible with ISO9660 level one and two or with ROMEO and JULIET, recorded discs with the multi sections can also be
played. MP3 files are incompatible with the transportation of read-in files.
The max character width of the folder name is 32.If the file is recorded through ROMEO and JULIET system, only the former 32
characters are displayed. While playing discs with MP3 and CD-DA, such as CD EXTRA and MIXED MODE CD the system can only
switch between MP3 and CD-DA. The selected folder sequence of playing and other operations will be the sequence to write in the
software. So the anticipated sequence of playing should not conflict with the actual playing sequence. However, there is, indeed some
software that play sequence is allowed to be set. The file is compatible with Id3 label version 1.0 and 1.1, so as to display the music titles
and authors. The enhancing function is valid only when playing MP3 in 32, 44.1 and 48 KHz sample frequencies 16,22,05,24, 32, 44.1
KHz can be played. The tone of MP3s file can usually be bettered when the bit rate is increased. This machine can play recordings
between 8KBPS and 320 KBPS. However, in order to enjoy a good tone, we recommend discs over 128KBPS.
!!!!!IMPORTANT!!!!!
While naming an MP3 file, add relevant extending name “.mp3”
This machine will play files with .mp3 as MP3; do not use this extending name on non mp3 files to avoid noises and other problems.
MP4
Due to new DivX version restriction on decoding, this unit will play most of the DivX format but some of the newer version will not.
It can also play most of the .avi files with MPEG 4 codec.
Replacing Remote Control Battery
* When the remote control operation range becomes an issue or none functional at all.
Replace the battery with a new button cell. Make sure to purchase the same size battery.
2. Put the button-type
battery (+) mark
upward into the
battery holder.
3. Insert the Battery
Holder into the
Remote Control.
1. Pull out the
Battery Holder while
pressing the stopper.
3
Remote Control
4
REMOTE CONTROL FUNCTIONS
1. PWR: Power (on/off)
SUB-T/REC: Language subtitle (on/off)
MUTE: Mute enable/disable sound
SRC: To switch between modes
2. BND/RDM: To select different bands (radio mode) To turn on random playing
APS/PRG: Automatic scan/program (radio mode)
ST/RPT: Stereo/Mono switch (radio mode) Repeat on/off
3. : Play/Pause
: Stop
Setup: For system settings
Title: Title Menu
Enter: Confirm/play
: Directional buttons
4. Phone call pick-up/send/ring on
OSD: Screen info Display
: End phone call/ring off
5. 0-9: Number buttons for dialing phone calls
GOTO: GOTO search
RO/RS: Radio Scan
6. AF/TA/PTY – None functional buttons. (only for European models)
7. : Skip forward/next chapter/track
: Previous/last chapter/track
: Increase/decrease volume
SEL: System settings
CLK: Clock display button
EQ: Preset sound effects (equalizer)
N.P/Angle: Video switch/Angle Adjustment
R.L/Language: Left/Right soundtrack switch dialogue language
5
Front Panel
1. Release Button 9. USB Port
2. MenuButton 10.Play/Pause/APS button
3. RDM/Band Select button 11. CLK/ Button
4. SourceButton 12.TFTLCDScreen
5. Four Way Directional button 13. Volume Button
6. ST/RPT 14.DiscSlot
7. MIC 15.SDSlot
8. Mute Button 16. Reset Button
17. Eject Button
6
FRONT PANEL FUNCTIONS
1. – Front panel release button
2. Menu – System settings
3. Band/RDM – To toggle change between FM1/FM2/FM3/AM1/AM2 and Random
Play
4. Source/Power – To turn the unit on and toggle between Modes
DVD/CD/Tuner/USB/SD/AUX/Bluetooth modes
5. Four directional buttons – To change setting using up/down/left/right
6. ST/RPT – To change audio from Stereo/Mono/Repeat on/off
7. MIC – (microphone) Use when on Bluetooth mode
8. Mute– Mute
9. USB Port – For inserting supported USB device
10. APS/ – Reception Scan/Play/Pause
11. CLK/ – Clock display/Stop button
12. TFT LCD Screen – 3” Full touch TFT LCD Screen
13. Volume Knob – For adjusting volume levels
14. Disc Slot – For inserting discs
15. SD/MMC Slot – Memory Card Slot
16. Reset – To reset all setting to factory default
17. – To eject inserted discs
7
Basic Setup
Powering the unit ON/OFF
- Press the Source/Power button once to turn the unit on. Press and hold to turn off.
Note: When using the remote, just press “PWR” power button once to turn unit on/off.
Switching Modes
- Press the Source/Power Button on the unit repeatedly to cycle through the Modes.
When on the main screen, simply touch the desired icon. (See below)
Main Screen
Video Setting
-To change settings,press MENU button on the panel or Setup on the remote control.
Scroll down or touch the option you want to change directly on the screen, press
to change settings. Play with these options to get the desired setting. Touch
VMODE then to cycle through preprogrammed video settings.
8
Table of contents
Other sumas Car Receiver manuals
