Stryker Endoscopy X7000 Operating instructions

Table of Contents

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Product Description / Intended Use . . . . . . . . . . . . . . . . . 5

Setting Up the X7000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Connecting the AC Power Cable . . . . . . . . . . . . . . . . . . . . . . . . 8

Connecting the Camera and Monitor. . . . . . . . . . . . . . . . . . . . . . 9

Connecting the Light Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Operating the X7000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Powering the System On and Off . . . . . . . . . . . . . . . . . . . . . . . 12

Selecting the Operation Mode . . . . . . . . . . . . . . . . . . . . . . . . . 13

Adjusting the Brightness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Receiving Feedback from the X7000. . . . . . . . . . . . . . . . . . . . . 14

Safety Shutoff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Checking the ESST Feature . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Using the X7000 with a Voice-Controlled System Interface . . . . . . 16

Using the Ethernet Interface . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Cleaning and Maintenance . . . . . . . . . . . . . . . . . . . . . . . 18

Cleaning the X7000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Caring for the Lamp Module . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Replacing the Lamp Module . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Replacing the Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Disposing of the X7000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 25

Electromagnetic Compatibility Tables . . . . . . . . . . . . . . 27

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Service and Claims. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Table of Contents

Other Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Warnings and Cautions

Please read this manual and follow its instructions carefully. The words

warning, caution, and note carry special meanings and should be

carefully reviewed:

Warning The personal safety of the patient or physician may be

involved. Disregarding this information could result in injury

to the patient or physician.

Caution Special service procedures or precautions must be

followed to avoid damaging the instrument.

Note Special information to make maintenance easier or

important information more clear.

An exclamation mark within a triangle is intended to alert

the user to the presence of important operating and

maintenance instructions in the literature accompanying

the product.

A lightning bolt within a triangle is intended to warn of the

presence of hazardous voltage. Refer all service to

authorized personnel.

To avoid potential serious injury to the user and the patient and/or

damage to this device, the user must:

1. Read this operating manual thoroughly and be familiar with its

contents prior to using this equipment.

2. Carefully unpack the unit and check if any damage occurred

during shipment. If damage is detected, please refer to the

Service and Claims section in this manual.

3. Be a qualified physician, having complete knowledge of the use

of this equipment.

4. Test this equipment prior to a surgical procedure. This unit was

fully tested at the factory before shipment.

5. Attempt no internal repairs or adjustments not specifically

detailed in this operating manual.

6. Never sterilize any part of the X7000 console.

7. Disconnect the X7000 from the electrical outlet when inspecting

the fuses.

The warranty is void if any of these warnings is disregarded.

Warnings and Cautions

Stryker Endoscopy accepts full responsibility for the effects on safety,

reliability, and performance of the equipment only if:

• Readjustments, modifications, and/or repairs are carried out

exclusively by Stryker Endoscopy.

• The electrical installation of the relevant operating room

complies with the applicable IEC, CEC, and NEC requirements.

Stryker Endoscopy reserves the right to make improvements in the

product(s) described herein. Product(s), therefore, may not agree in detail

with the published design or specifications. All specifications are subject

to change without notice. Please contact the local Stryker Endoscopy

Distributor listed in the Other Service section, or phone your local Stryker

Endoscopy sales representative or agent for information on changes and

new products.

Warning Federal law (United States of America) restricts this device

to use by, or on order of, a physician.

Other Symbol Definitions:

Type CF Applied Part

Protective Earth Ground

Equipotentiality

Denotes compliance to CSA 22.2 No.601.1-M90 and

UL2601-1.

Product Description / Intended Use

The Stryker Endoscopy X7000 Xenon Light Source is a light-generating

unit designed to illuminate surgical sites during endoscopic applications.

The X7000 uses a 300-watt xenon lamp to generate bright, crisp light,

which it delivers to the surgical site via a fiberoptic light cable. The X7000

is compatible with all Stryker light cables, and, with the proper light cable

and adapters, can connect to any flexible or rigid endoscope.

The X7000 is equipped with Electronic Scope Sensing Technology

(ESST), a special safety feature that helps prevent accidental burns

caused by an unattended light cable. When operated with an ESST light

cable, the X7000 senses when the scope and the light cable are

separated and places the light source in STANDBY mode. In STANDBY

mode, the X7000 will reduce light output to a minimum, preventing the

light cable from generating excessive heat.

The Stryker Endoscopy X7000 Xenon Light Source consists of one of

each of the following:

• light source console

• power cord

• video cable (purchased separately)

• xenon lamp module (spare or replacement lamp modules can

be purchased separately)

The features of the X7000 console are described in Figure 1 on the

following page.

Product Description / Intended Use

Figure 1: The X7000 console, front panel (top) and rear panel (bottom)

56 78 9

101112

13 14 15

Product Description / Intended Use

1. Power Button: Powers the unit on and off.

2. Bulb-Hours LCD: Displays the total number of hours the lamp has

operated since the last lamp change.

3. STANDBY LED: Illuminates when the unit is operating in the

STANDBY mode. In STANDBY mode, light output is reduced to a

minimum level.

4. Mode Switch: Selects either STANDBY or RUN mode when

pressed. STANDBY is the default mode when the light source is

powered on.

5. RUN LED: Illuminates when the unit is operating in the RUN mode.

In RUN mode, light output is determined by the automatic or

manual shutter.

6. Brightness LCD: Indicates the light intensity level (0-100%).

7. Shutter Switch: Selects either the AUTO or MANUAL shutter

mode when pressed. MANUAL is the default mode when the light

source is powered on.

8. AUTO LED: Illuminates when the shutter is in the AUTO mode. In

AUTO mode, light output is determined by the brightness setting

and the input video signal.

9. Jaw Handle: Opens the fiberoptic-cable holder.

10. Cable Clamp: Grasps the light-source end of an inserted fiberoptic

cable. (When no cable is inserted, the lamp automatically turns off

to save bulb hours.)

11. MANUAL LED: Illuminates when the shutter is in the MANUAL

mode. In MANUAL mode, light output is determined by the

Brightness Slide Bar.

12. Brightness Slide Bar: Increases light intensity when moved to the

right; decreases light intensity when moved to the left.

13. Voice-Control Port: Connects to Stryker voice-control systems.

14. Ethernet Port: Provides an ethernet connection.

15. Video-In Port: Provides a BNC connection for camera video input.

16. AC Inlet: Connects to the provided power cord for AC power supply.

17. Fuse Holder: Contains two 5A fuses.

18. Equipotentiality Plug: Provides a grounding post for common

grounding with other equipment.

Note Your local Stryker Endoscopy sales representative will

perform at least one inservice at your convenience to help

set up the equipment and instruct you and your staff on its

operation and maintenance. Please contact your local

Stryker Endoscopy sales representative to schedule an

inservice after the equipment has arrived.

Note When selecting a setup location for the X7000, consult the

“Electromagnetic Compatibility” section included in this

manual to determine the best location.

To set up the X7000, make the following connections:

• Connect the AC power cable

• Connect the camera and monitor

• Connect the light cable

Connecting the AC Power Cable

1. Plug in the AC power cord to the AC Inlet on the rear console

panel.

2. Plug in the other end of the AC cord to a hospital-grade outlet.

Setting Up the X7000

Table of contents

Other Stryker Endoscopy Medical Equipment manuals

Stryker Endoscopy

Stryker Endoscopy 1088 Operating instructions

Stryker Endoscopy

Stryker Endoscopy Arthroscopy Pump Standard User manual

Popular Medical Equipment manuals by other brands

TekTone

TekTone Tek-CARE160 Installation and operation manual

NeuroMetrix

NeuroMetrix Quell 2.0 user manual

AMT

AMT XLR8 Quick reference guide

Medipost-Nutristoma

Medipost-Nutristoma MD300K2 instruction manual

EDAN

EDAN SONOTRAX Pro user manual

Restorative Therapies

Restorative Therapies RT300 Service guide

Gendex

Gendex Expert DC installation manual

Dexcowin

Dexcowin ADX4000W user manual

Libelium

Libelium MySignals user manual

Acelity

Acelity V.A.C.ULTA 4 user manual

Caputron

Caputron ActivaDose II tDCS quick start guide

FujiFilm

FujiFilm Sonart Features

Plinth 2000

Plinth 2000 93CDT Service manual

GE SENOGRAPHE 800T Operator's manual

GE Definium 5000 Operator's manual

Kanmed

Kanmed GE-1380 user manual

Huntleigh

Huntleigh FD1 Instructions for use

Stryker

Stryker SPR Plus Operation manual