STRYDE BIKE User manual
BIKE Manual
2
Table Of Contents
Safety Information 3
Operation Instructions 5
Bike Specifications 6
Display Specifications 7
Stryde Pre-Assem ly 8
Setting Up Your Bike 15
Adjusting The Saddle 17
Adjusting The Handle ar 18
Torq Kno And Emergency Brake 19
Getting Started 20
Class Screen 22
General Maintenance 23
Limited Home Warranty 26
3
Safety Information
Read this manual carefully before using the Stryde bike.
ollow all operating and maintenance instructions. Please
keep this manual for future reference. Improper use or
maintenance can result in injury and void the warranty
terms.
WARNING!
Please train all the users of the ike to follow these safety
instructions. DO:
1. Use this equipment only for its intended use as
descri ed in this manual. Do not attempt to ride this
ike at high pedal speeds until you have ridden the ike
for some time and are comforta le riding at slower
pedal speeds.
2. Stop y reducing the pedaling frequency in a controlled
manner or press the emergency rake to a stop efore
dismounting the ike.
3. Serious injury or death may occur from over-training.
Consult a medical doctor or qualified fitness instructor
to determine an exercise program appropriate for your
level of fitness.
4. Do not attempt to turn the pedal cranks y hand. Do not
touch any driving mechanism while it is in motion as
possi le injury could occur.
5. In a home setting, keep children away from the ike
when it is not in use. Keep children and pets away from
the unit while it is in use.
6. Never drop or insert any o ject into any opening of the
ike.
7. Only use the ike on a sta le, level floor.
8. Follow instructions for safe use of the equipment
including proper seat position, handle ar position, and
use of foot positioning system of pedals. Do not attempt
to pull up handle ar post and seat post over the ‘MAX.’
graduation.
9. For safe operation, allow for at least 2 feet (60cm) of
free space to either side of the unit and 2 feet (60cm) of
free space to the rear of the unit.
4
10. Before eginning this or any exercise program, consult a
physician. This is especially important for persons over
the age of 35 or persons with pre-existing health
conditions.
11. The ike should not e used y persons exceeding 350
l s in weight.
12. Close supervision is necessary when this exercise
equipment is used y, on, or near children, invalids, or
disa led persons.
Regularly examine the ike for damage and wear.
Inopera le components should e replaced immediately or
the equipment should not e used until it is repaired.
Failure to follow all guidelines may compromise the
effectiveness of the exercise experience, expose yourself
(and possi ly others) to injury, and reduce the longevity of
the equipment.
5
Operation Instructions
Warning - As the owner of this exercise equipment, you
should insist that all users follow the same guidelines: you
should make this manual available to all users.
1. O tain a complete physical examination from your
medical doctor and enlist a health/ fitness
professional’s aid in developing an exercise program
suita le for your current health status.
2. When working out for the first time, start out slowly for
a minimum of five minutes.
3. After your muscles are warmed up, gradually increase
the pedaling speed and/or resistance.
4. The speed and duration of your exercise program
should always e su ject to how you feel. Never permit
peer pressure to exceed your personal judgment while
exercising.
5. This exercise equipment is not intended for use y
persons with reduced physical, sensory or mental
capa ilities, or lack of experience and knowledge.
6. Overweight or severely de-conditioned individuals
should e particularly cautious when using the
equipment for the first time. Even though such
individuals may not have histories of serious physical
pro lems, they may perceive the exercise to e far less
intense than it really is, resulting in the possi ility of
overexertion or injury.
7. Proper installation and regular maintenance are
required to ensure user’s safety.
8. Maintenance is the sole responsi ility of the owner.
6
Bike Specifications
Tech Specs And Requirements
Footprint 24” x 49.6” (61cm x 126 cm)
Bike Weight 124.6 l (56.5 kg)
Max Saddle Height 42.5” (108 cm)
Max Handle ar Height 46” (117 cm)
User Height Range 5’ 1” to 6’ 5” (155 cm - 200 cm)
Max User Weight 350 l (160 kg)
Pedals SPD pedals with toe cages
Seat
Seat Adj. Locking
Dum ell Bracket
Seat Adj. Locking
Pedal
Crank Arm
Shrouds
Handle Bar
Brake Tension Kno Bottle Holder
Handle ar Adj.
Locking Lever
Flywheel
Transportation
Wheel
Screen
Adjustment Foot
Leveler
7
Display Specifications
Display
21.5” 1080P HD Touchscreen
Android 8.1 Operating System
16 GB Flash Storage
ANT+
™
and Bluetooth ® 5.0
MT8167A Processor
8
Stryde Pre-Assem ly
Use the following procedures to unpack and assem le
your Bike.
1. Using a razor knife (Box Cutter) cut the outside,
ottom, edge of ox. Lift Box over the unit and
unpack.
2. Carefully remove all parts from carton and inspect
for any damage or missing parts. If damaged parts
are found, or parts are missing, contact us
immediately.
3. Locate the hardware package. Each part in the
hardware package is la eled with a num er. Remove
the tools first. Remove the hardware for each step as
needed to avoid confusion.
CAUTION: Damage to the bike during assembly is not
covered as part of the limited arranty. Take care not
to drop or lean the bike on its side.
Carefully stand the bike up in the normal upright
position on a stable surface so it ill not tip over during
assembly.
Protect the environment by not disposing of this
product ith household aste. Check your local
authority or approved aste center for recycling advice
and facilities.
9
Stryde Pre-Assem ly CONTINUED
Tools Needed:
#106. 14/15m/m Wrench (1pc)
#108. Phillips Head Screw Driver (1pc)
#107. M6 L Allen Wrench (1pc)
#109. M4 L Allen Wrench (1pc)
10
Stryde Step One
HARDWARE OR STEP 1
PART
TYPE DESCRIPTION QTY
76 Button Head Socket Bolt
3/8" × 2-1/4" 4
77 Flat Washer Ø10 × Ø 25 × 1.5T 4
78 Nylon Nut 3/8" × 7T 4
1. Align the screw holes of the main frame (1) and the front
sta ilizer tu e (2). Insert two 3/8"×2-1/4"_Button Head Socket
Bolt (76) through the holes and tighten them with two sets of
Ø10×Ø25×1.5T_Flat Washer (77) and 3/8"×7T_Nylon Nut (78)
y using a 14/15m/m_Wrench (106) and a M6 Allen Wrench
(107).
2. Align the screw holes of the main frame (1) and the rear
sta ilizer tu e (3). Insert two 3/8"×2-1/4"_Button Head Socket
Bolt (76) through the holes and tighten them with two sets of
Ø10×Ø25×1.5T_Flat Washer (77) and 3/8"×7T_Nylon Nut (78)
y using a 14/15m/m_Wrench (106) and a M6 Allen Wrench
(107).
Table of contents
