Strong SRT 7805 User manual
Digitaler High Definition Satelliten
Receiver SRT 7805
Abbildung ähnlich
Bedienungsanleitung
User Manual
Fig. 1
Fig. 2
Fig. 3
Fig. 4
BA
SCART
Fig. 5
BA
HDMI
Fig. 6
A B
MENU OK
EXIT
C
12V/230V
C
12V/230V
C
12V/230V
1 3 4 62
5 7
1
2
43 5 6 7 8 9
1
4
6
10
14
19
21
23
11
15
18
18
11
7
24
27
31
28
3
33
2
5
8
9
25
26
29
30
32
12
13
17
22
19
20
12
16
Fig. 1
Fig. 2
Fig. 3
Fig. 4
BA
SCART
Fig. 5
BA
HDMI
Fig. 6
A B
MENU OK
EXIT
C
12V/230V
C
12V/230V
C
12V/230V
1 3 4 62
5 7
1
2
43 5 6 7 8 9
1
4
6
10
14
19
21
23
11
15
18
18
11
7
24
27
31
28
3
33
2
5
8
9
25
26
29
30
32
12
13
17
22
19
20
12
16
1
PART 2 • English
English
TABLE OF CONTENTS
1.0 INTRODUCTION 2
1.1 Safety Instructions 2
1.2 Storage 2
1.3 Equipment Set-up 2
1.4 Accessories 3
1.5 Usage of external USB devices 3
1.6 General Information 3
2.0 YOUR RECEIVER 4
2.1 DEFAULT PIN-CODE: 0000 4
2.2 Front Panel 4
2.3 Rear Panel 4
2.4 Remote Control Unit 4
3.0 CONNECTIONS 5
3.1 Basic connection using a Scart cable 5
3.2 Basic connection using an HDMI cable 5
3.3 Connecting multiple fixed dishes using a DiSEqC 1.0 switch 5
4.0 STARTING UP FOR THE FIRST TIME 6
4.1 Language selection 6
4.2 Location selection 6
4.3 Output selection 6
4.4 Channel installation 6
4.5 First activation of your HD+ smart card 6
5.0 QUICK GUIDE TO USING YOUR RECEIVER 7
6.0 OPERATION 7
6.1 Changing channels 7
6.2 Info Banner 8
6.3 Audio language and Audio mode 8
6.4 Teletext and Subtitles 8
6.5 HDMI video format 8
6.6 EPG (Electronic Programme Guide) 8
6.7 Recording 9
6.8 Time shift 9
6.9 Playback of recording 9
7.0 MENU 9
7.1 Channel Setup 10
7.2 Control Panel 11
7.3 CAS 13
7.4 Multimedia 13
7.5 Program Guide 15
8.0 OTA SOFTWARE UPGRADE 15
A.1 TROUBLESHOOTING 16
A.2 SPECIFICATIONS 17
A.3 ALLGEMEINE GESCHÄFTSBEDINGUNGEN HD+ 18
STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EEC and
73/23EEC; RoHS 2002/95EEC
Manufactured under license from Dolby Laboratories
Dolby’ and the ‘double-D’ symbol are trademarks of Dolby Laboratories
Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of
products may change. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories, ASTRA is a registered trade mark
of SES ASTRA, all other product names are trademarks or registered trademarks of their respective owners.
© STRONG 2010. All rights reserved. 07/2013
Stand. März 2010
* €0,14/Min. aus deutschen Festnetz;
* €0.42/Min. max. aus Mobilfunknetzen
2
PART 2 • English
1.0 INTRODUCTION
1.1 Safety Instructions
DO NOT INSTALL YOUR RECEIVER:
In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a
surface which might obstruct the ventilation slots.
DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES:
To direct sunlight or any other equipment that generates heat; to rain or intense moisture; to
intense vibration and to any shock which may cause permanent damage to your receiver or to
any magnetic objects, such as loudspeakers, transformers, etc.
Do not use a damaged power cord. It may cause a fire or an electrical shock. Do not touch a
power cord with wet hands. It may cause an electric shock.
When the receiver is not used for a long period of time, you should unplug the power cord
from the wall socket.
Do not use alcohol or ammonia based liquids to clean the receiver. If you wish, you may clean
your receiver with a soft lint-free cloth slightly made damp with a mild soap solution, only after
disconnecting from the mains voltage supply. Make sure no foreign objects fall through the
ventilation slots because this could cause fire or an electric shock.
Do not place any objects on top of the receiver because this might prevent proper cooling of
the components inside.
Safety Precautions
Never open the receiver cover. It is dangerous to touch the inside of the receiver due to high
voltage currents and possible electrical hazards and your warranty will be void. Refer all
maintenance or servicing to suitably qualified personnel.
When you are connecting cables, be sure that the receiver is disconnected from the mains
supply voltage. Wait a few seconds after switching off the receiver before you move the receiver
or disconnect any equipment.
It is a necessity that you only use an approved extension and compatible wiring that is suitable
for the electrical power consumption of the installed equipment. Please ensure that the
electrical power supply corresponds with the voltage on the electrical identification plate at the
back of the receiver.
If the receiver does not operate normally, even after strictly following the instructions in this user manual,
it is recommended to consult your local dealer or contact the appropriate service.
1.2 Storage
Your receiver and its accessories are stored and delivered in a packaging designed to protect against
electric shocks and moisture. When unpacking it, make sure that all the parts are included and keep
the packaging away from children. For transporting the receiver from one place to another or if you are
returning it under warranty conditions, make sure to repack the receiver in its original packaging with its
accessories. Failing to comply with such packaging procedures could void your warranty.
1.3 Equipment Set-up
We recommend you consult a professional installer to set up your equipment. Otherwise, please follow
the instructions below:
Refer to the user manual of your TV and your antenna.
Make sure that the SCART/HDMI cable and outdoor components are in a good condition and
the SCART/HDMI connections are well shielded and from good quality.
This manual provides complete instructions for installing and using this receiver. The following symbols
will serve as follow.
3
PART 2 • English
English
WARNING: Indicates warning information.
Note Indicates any other additional important or helpful information.
MENU Represents a button on the remote control or the receiver. (BOLD
CHARACTER)
Move to Represents a menu item within a window. (Italic Character)
1.4 Accessories
User’s Manual
1 Remote control unit
1 Main Power adapter with power cord
1 HD+ smart card
2x Batteries (AAA type)
WARNING: The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries.
If rechargeable accumulators instead of batteries are going to be used, we
recommend using (e.g. NiMH) types with low self-discharge to ensure long
time operation of remote control.
1.5 Usage of external USB devices
It is recommended to use USB 2.0 high speed storage devices. If your device is not compatible to
USB 2.0 specifications, recording, playback and other multimedia functions of the receiver would not
work properly.
STRONG cannot guarantee the compatibility to all types of USB storage devices.
It is advised not to store important information on USB storage devices used with the receiver. Always
make backups of data on your USB storage device before you are going to use it with your receiver..
STRONG will not take responsibility for any loss of information or circumstances caused by loss
of information.
Please ensure that either the USB device is already formatted to FAT or FAT32 system to use all media
and record functions.
If your USB storage device is going to be used ONLY for record and playback, we recommend formatting
it to E2FS (Linux file system) for the best performance of recording and playback. You can format the
USB device via your receiver, refer to chapter 7.4.1 USB INFO & FORMAT for details.
Please be aware that formatting in Linux file system will have the consequence that Windows will
not recognise this USB device anymore. If you want to use your E2FS formatted USB storage device
under Windows we recommend you to use tools available in the WWW, for example the program: Ext2
Installable File System
1.6 General Information
HD PLUS
Version of the Test Suite was used in conformance testing
Services via the Satellite Infrastructure are available in Germany (or such other territories as
APS may define from time to time), only.
The usage of the HD+ card is designated for the Federal Republic of Germany only..
DOLBY
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
4
PART 2 • English
2.0 YOUR RECEIVER
2.1 DEFAULT PIN-CODE: 0000
2.2 Front Panel
Fig.1
1. Standby/ON switch Turns the receiver ON or to Standby
2. Navigations buttons Menu navigation
3. 4 digit LED display Displays channel number or time
4. MENU Opens the OSD menu
5. EXIT Exit from menu
6. OK Confirm selection
7. Card reader Slot to insert HD+ card for access of HD+ channels*
2.3 Rear Panel
Fig 2.
1. SAT IN To connect to the LNB of your satellite dish for reception of satellite
broadcast signal
2. COMPONENT To connect to TV or Beemer for high video quality over Y/Pb/Pr
component output
3. VIDEO (RCA) To connect to the RCA video input of your TV or VCR using an
RCA cable
4. AUDIO (L/R) To connect to the audio input of TV, VCR or your HIFI using an
RCA cable
5. TV SCART To connect to TV using a SCART cable
6. HDMI To connect to the HDMI input of your TV using a good quality
HDMI cable.
7. S/PDIF (Opt.) To connect to a digital or home cinema audio amplifier using an
optical cable
8. USB Connect your USB storage device (stick, HDD, etc.) to this port
9. DC POWER To connect to the original included main power adapter (Input
110 – 240 V 50 ~ 60 Hz/ Output 12 V DC) there and connect main
power adapter to the original included power cord.
2.4 Remote Control Unit
Fig. 3.
1. q Turns the receiver ON/Standby
2. Mutes the audio output of the receiver
3. 0~9 Channel number and numeric value input
4. FAV Opens the favourite group selection
5. OPT Opens the audio and subtitle selection menu
6. TXT Displays the current Teletext of this channel, if available
7. F.LIST Opens the playback list in viewing mode
8. MEDIA Opens the Multimedia menu in viewing mode
9. RECALL Toggles between the two last watched channels
10. GUIDE Displays the EPG (Electronic Program Guide)
11. VOL pq Increasing/decreasing of the volume level
12. PAGE CHpq Switches to next/previous channel in viewing mode or scrolls page
wise in lists
13. INFO Press once to display channel information. Press twice to call extended
program info.
14. RED For Teletext function, in OSD for specific functions.
5
PART 2 • English
English
15. GREEN For Teletext function, in OSD for specific functions.
16. YELLOW For Teletext function, in OSD for specific functions.
17. BLUE In viewing mode opens the EPG overview, for Teletext and in OSD for
specific functions
18. pq Scrolls channel and EPG information up/down in viewing mode, in
OSD for navigation.
19. tu In OSD for navigation
20. OK In viewing mode displays the channel list, in Menu mode activation/
confirmation of the specific item
21. MENU Opens the menu in viewing mode, within menu you can directly exit to
viewing mode
22. EXIT In viewing mode removes appearing messages /Info banner, in OSD
one step back or cancel actions
23. TV/RAD Toggles between TV and Radio mode
24. ASPECT Show information about the screen format in broadcast.
25. HISTORY Displays the last watched channels list in viewing mode including
EPG information
26. SIGNAL Display signal and quality of satellite signal from current selected
satellite and channel
27. 5 Fast rewind
28. 1 PLAY / Opens the playback list in viewing mode
29. 3 Stop
30. 6 Fast forward
31. 2 In viewing mode starts Timeshift, in Multimedia for Pause function
32. 4 Starts recording of the actual broadcast
33. F1~F4 No function
3.0 CONNECTIONS
3.1 Basic connection using a Scart cable
Fig. 4.
1. Connect the LNB of your satellite dish to the SAT IN connector of your receiver using a good
quality coax cable and suitable ‘F-connector’ plugs.
2. Connect one end of a good quality Scart cable to the TV SCART connector on your receiver
and the other end to the SCART input of your TV.
3. Plug the power adapter & cord to a suitable wall outlet.
3.2 Basic connection using an HDMI cable
Fig. 5.
1. Connect the LNB of your satellite dish to the SAT IN connector of your receiver using a good
quality coax cable and suitable ‘F-connector’ plugs.
2. Connect one end of a good quality HDMI cable to the HDMI output on your receiver and
the other end to the HDMI input of your TV.
3. Plug the power adapter & cord to a suitable wall outlet.
3.3 Connecting multiple fixed dishes using a DiSEqC 1.0 switch
Fig. 6.
1. Connect the LNB’s of your fixed dishes to the inputs of a DiSEqC 1.0 switch
2. Connect the output or “to receiver” connector of the DiSEqC 1.0 switch to the SAT IN
connector on your receiver.
3. Refer to section 3.1 or 3.2 for TV and mains connections.
6
PART 2 • English
4.0 STARTING UP FOR THE FIRST TIME
Ensure that your satellite signal is of good quality and that all connections are sound. In case of
difficulties or questions, please ask you local dealer for assistance. It is recommended to follow the Setup
Wizard step by step. It will guide you through the basic installation and channel searching process. You
can enjoy digital HD broadcasts within just a few minutes.
4.1 Language selection
After turning on the power for the first time, the language selection menu will appear. Choose your
language with tu and confirm with OK. In this welcome screen will the most important button
description, be displayed. Once you are ready, press OK to advance to the next step of the Installation
wizard. During any stage of the Setup Wizard, you can press EXIT to get back to the previous screen.
4.2 Location selection
Here you can set the Time zone and switch the Summer time OFF or ON.
Use pq to move the highlight and tu to change settings. Press OK to confirm and to continue.
4.3 Output selection
Here you can select the connection type you use to your TV screen. Select HDMI / YUV if you use a
HDMI or a component cable to HD TV screen. Select SCART if you’re using a Scart cable to “normally”
TV screen. If SCART is selected, then select as well they correct size of you TV screen. Use pq to move
the highlight and tu to change settings. Press OK to confirm and to continue..
Note: HD+ services / channels can only be seen if correct selection is made!
4.4 Channel installation
This receiver is equipped with a new fast channel installation system by Astra 19.2 satellite called APS.
Per default all settings are correctly adjusted for a fast installation on Astra 19.2. Before you press OK
button to start the scan process, first check the Strength and Quality bars on the bottom of this menu.
Green bars indicate a good signal and you can proceed. Yellow bars indicate that the signal condition is
nearly acceptable and Red indicates bad signal. Adjust your dish for maximum possible signal strength
and quality. Once the signal cannot be improved anymore, fix the dish on this position and press OK to
continue and start APS scan process. Once receiver finished this scan process a selection will popup
with View or Next. Select View and press OK to enjoy and watch the digital satellite channels directly.
Select Next if you want to scan for more satellites/channels. Refer to chapter 7.1.1 CHANNEL SCAN for
detailed description.
Note: If you don’t want to use this option you can press the BLUE button to start a
normal auto scan on the selected satellite.
4.5 First activation of your HD+ smart card
Your receiver is already delivered with correct inserted smart card. Although we recommend you to check
that your smart card didn’t get loose during the transport.
If you have ensured that the SC is inserted properly, then you are ready for watching HD+ channels.
Your SC is already activated, so you only need to switch to an HD+ service channel (please see separate
HD+ sheet for HD+ channels reference).
If you have already switched to one of the desired programs, after 10 sec. you will have access to the
HD+ service.
Now you are ready to enjoy the HD+ channels.
7
PART 2 • English
English
5.0 QUICK GUIDE TO USING YOUR RECEIVER
We at STRONG understand that you can’t wait to enjoy your new HD+ receiver. The following quick guide
will make you familiar with the basic operation of this device. We do, however, advice you to read the full
manual to get the best performance from your STRONG HD+ receiver.
To turn your receiver ON or to Standby, use the STBY button on the remote control or the button on the
left side of the front panel.
If you are using the HDMI connection for your TV set, it might be possible that you need to switch on TV
and select the correct HDMI input first.
Choose the desired channel with the pq buttons and OK or the CH+/CH- buttons. Alternatively, you
can digit the channel number with the 0~9 buttons on the remote control. Or press OK in viewing mode
to display the channel list.
The volume can be adjusted with the VOL+/VOL- buttons.
6.0 OPERATION
In viewing mode, several features are available to make watching TV a true pleasure. This paragraph
describes these features. Please also read chapter 7.0 to get familiar with the menu of your new receiver.
6.1 Changing channels
Your new receiver is equipped with four ways to change channels.
via direct access
via the CH+/CH- buttons.
via the channel list
via selection of channel groups (APS)
Direct access
To gain direct access to a certain channel, simply input its number with the 0~9 buttons on the remote
control. Channel numbers can be up to four digits long. Entering a number with less than four digits is
possible. Just wait a few seconds and your receiver will switch to the selected channel.
Using the CH+/CH- buttons
CH+ or p and OK will switch to a higher channel.
CH- or q and OK will switch a lower channel.
Channel list
Press OK in viewing mode to display the Channel List. Use pq in the Channel List to highlight your
channel of choice and press OK once to select the highlighted channel. Press OK again to leave the
Channel List. The Channel List is equipped with a filter function to make finding your favourite channels
easier. Within the Channel List, press t button to jump to selections on left side of channel list banner.
Here you can select following options: ALL, FAV, A~Z, SAT and APS.
Use pq to select one of these options and press u button to select the list of your choice and OK
to confirm.
You can use the TV/R button within the channel list to toggle between TV and radio channel list/s.
APS Channel list
Your receiver is equipped with new system called “APS” Astra Platform Service which store channels in
separated channel lists on sort, type or group. If you are using the Astra 19.2 satellite and did scan on
HD+ channel scan in installation, then this system is contained in the channel list.
Press OK in viewing mode to display the Channel List. Press t button to select the group of your choice
on the left side of the channel list banner. Select APS with the pq buttons and press the u button
to show the group lists from APS channel system. Select your wanted channel group by pq buttons.
Directly on the right side is displayed which channels belong to this selected group. Press u button to
enter this channel group and select it with the pq buttons. Press OK once to select the highlighted
channel, by another pressing you can switch to viewing mode. The receiver will stay in the selected
channel group until you will select another one.
Table of contents
Other Strong TV Receiver manuals
Strong
Strong SRT 5855 User manual
Strong
Strong SRT 5001 User manual
Strong
Strong SRT 8300 CI User manual
Strong
Strong SRT 3000 User manual
Strong
Strong SRT 7004 User manual
Strong
Strong SRT 5015 User manual
Strong
Strong PRIMA IV User manual
Strong
Strong SRT 6100 User manual
Strong
Strong SRT 8205 User manual
Strong
Strong SRT 5502 MHP User manual
Strong
Strong SRT 8109 User manual
Strong
Strong SRT 5023X User manual
Strong
Strong SRT 5011 User manual
Strong
Strong SRT 4950E User manual
Strong
Strong SRT 5000 User manual
Strong
Strong SRT 8205 User manual
Strong
Strong SRT 8203 User manual
Strong
Strong SRT 8526 User manual
Strong
Strong SRT 5001 ECO User manual
Strong
Strong PRIMA III User manual
