StormRed SHARK User manual
SHARK
User Manual –Uživatelský manuál -
Užívateľský manuál - Használati utasítás
2
English
3 - 15
Czech
16 –28
Slovak
29 –41
Magyar
42 –54
3
Dear Customer,
Congratulations on your purchase of this quality product, which has been developed
according to the latest technical knowledge and manufactured using the latest
technology.
In today's lifestyle characterized by a lack of exercise, this machine is an essential
accessory for maintaining physical fitness and health.
Before putting the product into operation, please take the time to read the following
assembly and operating instructions carefully, even if you have purchased the machine
assembled.
If you have purchased the product in its original carton packaging, i.e. in disassembled
shipping condition, please pay particular attention to the assembly instructions. Before
starting assembly, carefully remove the individual components from the box, check that
they are complete and follow the instructions to think through the assembly procedure.
We believe that you will be satisfied with the purchased product and the machine will
contribute to the consolidation of your health and well-being. We wish you much
success, endurance and strength in achieving your sporting goals.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz
4
Safety instructions
•It is important to read these instructions carefully before assembling and using the
machine. A safe and effective workout will be achieved by ensuring that all
components are properly assembled and tightened. It is your responsibility to
inform each user of how to properly secure and use the machine and of all potential
hazards associated with improper securing.
•If you have health problems, consult with your doctor about using the machine. A
doctor's opinion is necessary if you are taking medication that affects your heart
rhythm, blood pressure or cholesterol levels.
•Take note of your body's reaction. Incorrect or excessive exercise can negatively
affect your health! Stop exercising when you feel: pain, chest pressure, irregular
heartbeat, breathing difficulties, dizziness, nausea. Inform your doctor if these
problems occur.
•Keep the machine out of reach of children and animals (the machine is designed for
adults only)! Protect the machine from the elements, especially water, dust, intense
sunlight and low/high temperatures. Keep the machine dry and clean, clean it with a
dry or slightly damp cloth.
•The maximum weight of the trainee is 120 kg!
•Always use the machine according to these instructions. If you find any defective
parts while assembling or inspecting the machine, or if you hear an unusual noise
while using the machine stop using it or stop assembling it.
•Do not use the machine until the fault has been rectified or defective parts have
been replaced! Leave repairs and adjustments to the professional staff of the service
centre of Alza, a.s. Prague. The warranty does not cover defects caused by
unprofessional intervention (repair) of the user, even by third parties.
•Use the machine on a firm, level surface and on a mat that protects the floor or
carpet. To ensure safety, it is necessary to have at least 0.5 m of clearance around
the machine when exercising.
•A safe level of equipment can only be maintained by regular checks for damage and
wear, for example connection points, etc. Before using the machine, check that all
nuts and bolts are properly tightened!
•Wear appropriate clothing when exercising, avoid wearing clothing that may get
caught in moving parts of the machine or restrict your movement.
•When moving the machine, watch out for back injury. Always use the lifting
technique or move the machine with the assistance of another person.
•The magnetic trainer has been tested and certified according to EN957 and
corresponds to class H - (Home) for use in households.
•Electrical equipment (computers) must not be disposed of with mixed municipal
waste but must be disposed of at designated or take-back sites, as must batteries
used in computers.
•Keep this instruction manual with safety instructions, the warranty card and the
proof of purchase on a safe place!
5
Assembly scheme
6
Parts list
Part number
Name
Description of the part
Quantity
1
Computer
1×
2
M5 Big head screw
M5*10L
2×
3
Handlebars
1×
4
Cable to pulse sensors
1 SET
5
Demarcation insert
1×
6
Handlebar cover
1×
7
Pin to secure handlebars
1×
8
+ Sensor cable 1
1×
9
Pedal (R+L)
1 SET
10
Load pin
1 SET
11
Handlebar frame
1 SET
12
M8 Screw
M8*18L
8×
13
Curved pad
φ20*φ8*1.2T
16×
14
- Sensor cable 1
1×
15
Voltage cable 1
1×
16
+ Sensor cable 2
1×
17
Voltage cable 2
1×
18
Main frame
1 SET
19
Arched nut
M8
4×
20
Matrix
2×
21
Front stabiliser bar end cap
2×
22
Front stabiliser
1×
23
M8 screw for stabilisers
4×
24
Pedal pin
2×
25
Cover (R+L)
1 SET
26
Pedal holder (R+L)
1 SET
27
Rear stabiliser
1×
28
Rear stabiliser end cap
2×
29
Shaft
1×
30
Corrugated pad
φ16
4×
31
6mm pad
6×
32
Flexible pad
2×
33
Straight pad
2×
34
Handlebar bolt (top)
2×
35
Handlebar arm
1 SET
36
Screw to handlebar (bottom)
2×
37
Straight pad
2×
38
M10 Ball nut
2×
39
M6 Ball nut
6×
40
Pedal arm (R+L)
1 SET
41
M6 Screw for pedals
M6*45
6×
42
M8 Handlebar bolt
4×
43
Handles
1 SET
7
Before assembly, place all parts on a firm, level and stable surface. Also place the main
frame on a firm, level and stable surface to prevent damage or scratches to the
machine. Make sure you have sufficient clearance around you during assembly.
Step 1:
Attach the rear stabiliser (27) to the main frame (18) using M8 bolts (23), curved pads(13)
and M8 nuts (19). Attach the front stabiliser (22) to the main frame (18) using M8 bolts
(23), curved pads(13) and M8 nuts (19).
8
Step 2:
Hold the handlebar frame (11) preferably with the help of another person! Connect
sensor cable 1 (14) to sensor cable 2 (16). Connect the Voltage cable 1 (15) to the Voltage
cable 2 (17). Slide the handlebar frame (11) onto the hole in the main frame tube (18).
Attach the handlebar frame (11) with 4 M8 screws (12) and 4 curved pads (13). Tighten
all screws carefully with an Allen key.
Connection of the two parts of the ballast cable
9
Step 3:
Attach the handlebar arms (35L&R) to the pedal arms (40L&R) using straight pads
(37),M10 nuts (38) and M10 bolts (36). Attach the pedals (9L&R) to the pedal arms
(40L&R) using pads (31), nuts (39) and M6 bolts (41).
Step 4:
Attach the handlebar arms (35R) by sliding the top hole onto the shaft (29), which you
will insert into the hole in the handlebar frame (11). Attach the handlebar arm (35R)
using the corrugated pad (30), pad (33), flexible pad (32) and M10 bolt (34). Use the same
procedure to attach the second arm (35L).
Then attach the pedal arm (40R) to the crank (26R) using the corrugated pad (30), pedal
pin (24) and nut (20).
10
Step 5:
Insert the handles (43L&R) into the top holes of the handlebar arms (35L&R). Fasten with
2 M8 screws (42).
Step 6:
Attach the handlebars with pulse sensors (3) to the back of the handlebar frame (11)
using the handlebar plate cover (6), the demarcation insert (5) and the pin (7).
Connect the pulse sensor cable (4) to the computer from the back (1).
Table of contents
Languages:
Other StormRed Exercise Bike manuals
