StorCase Technology Data Express DE200i-S User manual
Data Express DE200i-S Data Express DE200i-S
StorCase Technology, Inc. D89-0000-0142 ev. B00 D89-0000-0142 ev. B00 StorCase Technology, Inc.
Duration of Warranty
Seven-Year Warranty: The following StorCase products are covered by this warranty for a period of seven (7) years from the
original date of purchase from StorCase or its authorized reseller: all Data xpress® removable device enclosures and all
StorCase interface cables and accessories specifically intended for use with these products. Data Silo®, Data Stacker® and
InfoStation® products are covered by this warranty for a period of seven (7) years, excepting the RAID controller, power supply, fan
and blower components, which are covered by the three-year warranty described below.
Three-Year Warranty: The following StorCase products are covered by this warranty for a period of three (3) years from the
original date of purchase from StorCase or its authorized reseller: all Rhino®JR external expansion chassis, all RhinoJR
removable drive enclosures, and all RAID controller modules. In addition, the following components of the Data xpress, Data Silo,
Data Stacker, InfoStation products are subject to warranty for a period of three (3) years: all power supplies, fans and blowers.
Warranty Claim Requirements
To obtain warranty service, the defective product must be returned to your local authorized StorCase dealer or distributor, or, with
prior StorCase approval, to the StorCase factory service center. For defective product returns directly to StorCase, a Return
Material Authorization ("RMA") number must be obtained by calling StorCase Customer Service at (714) 445-3455.
Free Technical Support
StorCase Technical Support can be reached in the U.S. at (714) 438-1858 or toll-free at (888) 435-5460 (U.S. and Canada only).
StorCase uropean Technical Support can be reached in the U.K. at +44 (0) 1932 738900.
Disclaimers
The foregoing is the complete arranty for the products identified above and supersedes all other arranties and
representations, hether oral or ritten. StorCase expressly disclaims all arranties for the identified products, hich
are not stated herein, including, to the extent permitted by applicable la , any implied arranty of merchantability or
fitness for a particular purpose. In no event ill StorCase be liable to the purchaser, or to any user of a StorCase
product, for any damages, expenses, lost revenues, lost savings, lost profits, or any other incidental or consequential
damages arising from the purchase, use or inability to use a StorCase product, even if StorCase has been advised of
the possibility of such damages.
Complete warranty statement can be found in the full version of the Users Guide or on the StorCase web site at:
http:// .storcase.com/company/ arranty.asp
Copyright © 2004 StorCase Technology. All rights reserved. All registered trademarks are the property of
StorCase Technology. All other logos and trademarks are properties of their respective companies. Printed
in the U.S.A.
DE200i-S
Removable SCSI Narrow
Single-Ended Drive Enclosure
This document is not intended to replace the DE200i-S Users Guide. A full version of the Users Guide
can be found on the StorCase ebsite at http://www.storcase.com/support/dataexpress.asp
Receiving Frame Motherboard
(Rear View)
Certification
MI Standard: FCC Part 15 Class B, C CISPR B, C-Tick
MC Standard: N55022, N50081, N50082
FCC Certification
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received; including interference that may cause undesired
operation.
CE and C-Tick Notice
The official C and C-Tick symbols indicate compliance of this StorCase product to the MC directive of the uropean
Community and Australian Communications Authority respectively.
Declarations of C and C-Tick Conformity in accordance with the required standards have been made and are on file at
StorCase Technology; a copy of Declaration of Conformity is available in the full version of the product users guide.
LIMITED WARRANTY
ID Select Pins (J4): Pins 1-14 are reserved. Pins 15 -20 provide unit SCSI ID selection for the com-
puter system or expansion chassis. For remote ID selection through an expansion chassis, the unit
ID must be set to 0 or open (no jumpers installed) on these pins.
Enable ermination Power to/from SCSI Bus (W1): The rear panel contains the bus terminators (ac-
tive) for 8-bit single-ended SCSI interface. Jumper is installed at the factory.
Onboard (Receiving Frame) ermination (W2): Position A is installed at the factory and ill disable
termination. Moving the jumper to position B ill enable onboard termination.
Drive Installation Assembly
Drive Carrier
Disk Drive
(Not Included)
Power Cable
I/O Cable
ID Select
Cable
0366a
Cable
Cover
(Provided)
#6 32 x 3/16
Phillips Flat HD
Screw (6 Total)
Receiving
Frame
StorCase Technology, Inc. D89-0000-0142 ev. B00
Data Express DE200i-S Data Express DE200i-S
D89-0000-0142 ev. B00 StorCase Technology, Inc.
Unit ID elect witch Location
Drive
Carrier
Guide
Receiving
Frame
Unit Select
Rotating
Switch
Drive
Carrier
(removed)
Unit
Number
Display
Lock
and DC
Power
Switch Front of
Unit
0363
Typical C I ID elect Connections
(2mm Drive Pins)
Selecting the Unit ID Number: Use the alignment tool (provided) to select the ID number of the disk
drive.
ypical 2mm Drive Pin Configuration
Figure belo illustrates a typical SCSI ID select connection to a drive ith 2mm ID select pins. Attach
the ID select cable to the drive using the 2mm connectors. Align the ID0 pin ith the black ire. Attach
the 1.25mm connector on the other end of the ID select cable to the 1.25mm connector (J3B) provided
on the signal distribution board, located inside the carrier. In most cases, the drive manufacturer labels
the ro s of SCSI ID select pins in their significant bit order (0, 1, 2, as sho n in figure belo ). In other
cases, the manufacturer does not clearly label these pins in their significant bit order, but instead uses
pin numbers only. The ires on the ire harness connect to the positive pin (or sig-nal pins) on the disk
drive. In any case, either the odd numbered ro of pins or the even numbered ro of pins ill be the
signal ro . Refer to the device manufacturer's documentation for additional pin numbering and jum-
per option information.
0416
SCSI ID Select
Cable (from Data
Express Signal
Distribution Board)
1.25mm SCSI ID
Selection Connector J5
(located on disk drive
PCB)
SCSI I/O
Connector
Power
Connector
A0
A1
A2
SCSI ID Selection Pins
JP1 (located on disk
drive PCB)
When Using J5,
Remove All
Jumpers From JP1
R
e
s
e
r
v
e
d
G
n
d
Signal Distribution Board
ID
Select
Cable
Red (ID2)
Brown (ID1)
Black (ID0)
CARRIER BOARD
Inside Carrier
1.25mm Data
Express ID Select
Interface (J3B)
2mm Data Express
ID Select Interface
(J3A)
Typical C I ID elect Connections
(1.25mm Drive Pins)
ypical 1.25mm Drive Pin Configuration
Figure belo illustrates a typical SCSI ID select connection to a drive ith 1.25mm ID select pins. Connect
the 1.25mm ID select cable connector to the drive ID select pins. Attach each of the 2mm connectors on
the other end of the ID select cable to the 2mm connectors (J3A) provided on the signal distribution board,
located inside the carrier. Align the ID0 pin ith the black ire of the cable. Refer to the device
manufacturer's documentation for additional pin numbering and jumper option information.
0426
Signal Distribution
Board
ID
Select
Cable
Red (ID2)
Brown (ID1)
Black (ID0)
DISK DRIVE
CARRIER
BOARD
1.25mm Data
Express ID Select
Interface (J3B)
2mm Data Express
ID Select Interface
(J3A)
To Drive ID
Select Pins
To ID0
To ID1
To ID2
3 PIN WIRE WRAP
CONNECTOR (Provided). Use
in place of ID select cable
if there is not enough space.
Connects to J3.
Pin 1
J3
J6
(Reserved)
Carrier
Typical 2mm Drive ID Select Pins
(Pins vary on each drive model. See
Drive Manufacturer's Information.)
Receiving Frame Connector
(J4) Pin Configuration
0427
Receiving Frame
Mother Board
Connector J4
Installed
at Factory
Reserved
19
20
113
214
From System ID0
From System ID1
From System ID2
Ground
NO E: The lock on the Data Express receiving frame functions as a lock and a DC po er s itch for
the carrier unit. The lock MUST be engaged (turned counterclock ise) in order to supply po er
to the carrier and installed drive unit.
Other StorCase Technology Enclosure manuals
StorCase Technology
StorCase Technology Data Express DX115 User manual
StorCase Technology
StorCase Technology Data Express DE110 User manual
StorCase Technology
StorCase Technology Data Express DE110 User manual
StorCase Technology
StorCase Technology Data Express DE110 User manual
StorCase Technology
StorCase Technology Data Express DE100i-SWC User manual
StorCase Technology
StorCase Technology Rhino JR RJR110 User manual
StorCase Technology
StorCase Technology Data Express Ultra320 DE100 User manual
StorCase Technology
StorCase Technology DataExpress DE75i-A100 User manual
StorCase Technology
StorCase Technology Data Express DE75i-A User manual
StorCase Technology
StorCase Technology Data Express DE50 User manual
StorCase Technology
StorCase Technology Data Express DE100i-A100 User manual
StorCase Technology
StorCase Technology Data Silo DS100 User manual
StorCase Technology
StorCase Technology Rhino JR RJR400 User manual
StorCase Technology
StorCase Technology Data Express DE300i-SWC User manual
StorCase Technology
StorCase Technology Data Express Ultra320 DE200 User manual
StorCase Technology
StorCase Technology Data Express DE100i-SW User manual
StorCase Technology
StorCase Technology Data Express Ultra320 DE100 User manual
StorCase Technology
StorCase Technology Data Express DE110 User manual
StorCase Technology
StorCase Technology S21B101 User manual
StorCase Technology
StorCase Technology Data Silo DS560 User manual
