STOLZENBERG KSE 910 User manual

KSE 910 Date 0507

Operating Manual

Battery-operated suction sweeper

KSE 910

KSE 910 Date 0507 3

Table of Contents

Introduction ............................................................................................................. 4

Usage Conformant with Intended Purpose.............................................................4

Safety device .......................................................................................................... 5

General safety instructions ..................................................................................... 5

Safety instructions for handling batteries ............................................................ 5

Sweeper description ............................................................................................... 6

Initial start-up .......................................................................................................... 7

Operation ................................................................................................................ 7

Movement operation ........................................................................................... 8

Parking the sweeper ...........................................................................................8

Sweeping operation ............................................................................................ 8

Sweeping wet refuse ....................................................................................... 9

After sweeping................................................................................................. 9

Emptying the dustbin .......................................................................................9

Cleaning................................................................................................................ 10

Maintenance ......................................................................................................... 10

Filter cleaning .................................................................................................... 11

Changing the filter ............................................................................................. 11

Dismantling the filter ...................................................................................... 11

Filter mounting............................................................................................... 11

Mounting the side brushes ................................................................................ 11

Removing the side brushes............................................................................... 11

Changing the sweeping rollers.......................................................................... 12

Setting the traversing mechanism.....................................................................12

Battery charging ................................................................................................ 13

Maintenance chart ................................................................................................ 13

Malfunctions / error messages and troubleshooting.............................................14

Accessories and spare parts ................................................................................ 15

Transport............................................................................................................... 15

Disposal ................................................................................................................ 15

Technical Data ...................................................................................................... 15

Product marking.................................................................................................... 16

Service .................................................................................................................. 16

Declaration of conformity ...................................................................................... 17

Introduction

This operating manual contains instructions for using the hand-

operated sweeper KSE 910.

Our products are subject to continuous improvement.

Therefore, design changes that were made after this manual went to

print could not be incorporated.

If you have any questions, please contact our Service department.

The operating manual must be read and applied by all persons who

operate the sweeper.

Apart from the operating manual and the regulations for accident

prevention applicable in the country of use and the location of use, the

common, recognised rules for safe and technically correct working

must also be followed.

Usage conformant with intended purpose

The appliance is intended exclusively for sweeping on solid surfaces

(for example.: parking areas, walkways, shop floors).

The sweeper may only be used by reliable and instructed personnel.

Any other use, or any use over and above that, will be considered to

be non-conformant with intended purpose.

The manufacturer rejects any and all liability for damage resulting

from such use.

The risk is that of the user alone.

Usage conformant with intended purpose also includes compliance

with the operating manual and the inspection and maintenance

specifications.

Drive the sweeper only along expressly marked routes and spaces.

Transporting loads with the sweeper is not allowed.

Operation by children and youth is prohibited.

The appliance is not suited for picking up fluids, cables, cords, wires

or the like.

Danger

Under no circumstances may the machine be used for

sweeping up flammable or toxic or explosive materials or

inflammable gases or undiluted acids and solvents,

burning

or glowing objects.

KSE 910 Date 0507 5

Safety device

The hood switch prevents the machine from getting switched on when

the hood is open and switches off the machine if it is opened during

operation.

General safety instructions

The sweeper has been built according to the state-of-the-art and the

recognised rules of engineering safety. Nonetheless, there may be

some danger for the user or for third parties, or hindrances of the

sweeper and other property may result during the use of the machine.

Therefore, use the sweeper only in a flawless state, as well as in

keeping with intended purpose, in a safety-conscious and danger-

conscious manner, in compliance with these operating instructions.

In particular, have faults that could hinder the safety eliminated

immediately.

Always keep the operating manual easily accessible at the location of

the sweeper.

In addition to the operating manual, follow the general legal and other

binding regulations for accident prevention and environmental

protection. Do not make any changes or modifications to the sweeper

without the approval of the manufacturer.

Open the hood only for maintenance work and for charging the

battery. Never while the motor is running.

Safety instructions for handling batteries

The operating instructions of the battery manufacturer for his product

must be followed. Please note the regulations laid down by law for

handling accumulator batteries.

Charge discharged batteries as quickly as possible and only in well

ventilated rooms.

Danger!

Note that the accumulator batteries are filled with battery

acid. Keep open flames and electrical sparks away from the

charging area, since a highly explosive electrolytic gas

mixture is generated when batteries are being charged.

Never short-circuit battery poles. The batteries must always

be kept clean and dry to avoid leakage currents. For

avoiding damage to health,

smoking, eating and drinking in the vicinity of the battery

charging station must be avoided.

Sweeper description

The suction sweeper is driven by an electric motor.

Sweeping is done with two side brushes which convey the refuse to

the two sweeping rollers that are mounted at 90 degrees to the

direction of motion.

The rollers throw the refuse overhead in the rear dirt collector.

The dust that is collected by the sweeping rollers is kept in a lamellar

filter in the machine by the dust extraction.

The lamellar filter can, in turn, be cleaned by a manually actuated filter

vibrator.

Legend:

1 driving hoop

2 driving lever

3 operating console

4 filter cleaning lever

5 dustbin holder

6 dustbin

7 hood

8 side brushes

Operating console

Legend:

1 operating lever, left side brush

2 key switches

3 operating hours counter

4 operating lever, sweeping rollers

5 operating lever, right side brush

KSE 910 Date 0507 7

Initial start-up

Ensure that the machine was supplied complete and undamaged.

In case of any objections, contact your specialist dealer or our Service

department.

•Open the packaging and carefully lift the machine off the pallet.

Caution! Danger of injury!

Reach under the frame of the machinery to lift it.

There is a risk of injury if you attempt to lift the machinery

by the hood, the side brush retainer, or the dustbin.

•Open the hood and fasten it.

•Push the driving hoop –1- into the receptacles till the cross hoop

is at hip height (ergonomically correct height).

•Tighten the driving hoop screws –2.

•Set the side brush arms to the top position.

•and mount the side brushes (see page 10 "Mounting the side

brushes“).

•Connect the battery.

(See technical data - wiring diagram).

•Close the hood again.

The sweeper is ready for operation.

Operation

Safety information

Before starting movement, check the suction sweeper for correct

working and technical safety. Do not use the machine if it is faulty.

Operation must be matched to the prevailing conditions. Pay attention

to third parties, especially children, who are present in the working

area of the machine.

Never leave the running machine unattended.

Securely switch off the machine (see page 7."Switching off the

sweeper“).

In this manner, prevent unauthorised use by third parties.

Movement operation

•Insert the key in the key switch and rotate it in the clockwise

direction:

The electric motor starts.

•Pull the movement lever.

The sweeper moves forward.

If the lever is released, the sweeper remains at standstill.

Parking the sweeper

•Move the machine to an area provided (assigned) for the purpose.

The sweeper does not have any brakes.

•Therefore, secure the sweeper against rolling away (for example:

wheel chocks).

•Turn the key in the anticlockwise direction to switch off the motor

and pull out the key.

Caution!

Improper handling of the suction sweeper can result in

harm to persons and property.

•Prevent unauthorised usage of the suction sweeper, by :

never leaving the suction sweeper, when it is ready

for operation,

unattended,

pulling out the key of the key switch when leaving the

sweeper (for example, at the end of the working day

or depending on deployment),

keeping the key separately from the sweeper.

Sweeping operation

Note

The height adjustment of the side brushes and the

sweeping rollers is done via levers on the operating

console.

Each of the side brushes can be used individually.

•Start the movement operation (see page 7 "Movement“).

•By lifting and pushing forward the corresponding lever, the side

brushes and/or the sweeping rollers can be deployed in a

purposeful manner.

(Also see page 5 "Device description"

Legend:

1 operating lever, left side brush

2 operating lever, sweeping rollers

3 operating lever, right side brush

KSE 910 Date 0507 9

Sweeping wet refuse

For sweeping wet refuse, it is recommended that the fan shutter be

closed, to prevent clogging and softening of the filter.

This is how to adjust the fan shutter:,

•with the machine switched off, open the hood and fasten it.

•To close the fan shutter, rotate the lever –1-to the front position.

•To open the fan shutter, you must get the lever –1 into the rear

position.

After sweeping

•Switch off the machine (see page 7."Switching off the sweeper“).

•Adjust the side brushes and sweeping rollers in the upper

position.

Caution!

If the sweeping rollers are not set to their top position, the

bristles of the side brushes will be put under permanent load

in their off-position and consequently will wear prematurely

when used.

•Always empty the dustbin once you've finished sweeping.

(See "Dustbin emptying“)

Emptying the dustbin

In order to ensure proper sweeping performance, the dustbin has to

be emptied at regular intervals.

•Lift the dustbin securing device –1-and pull the dustbin on the

handle –2-from the frame of the machine.

•Empty the dustbin into a suitable container.

•Push the dustbin back into the machine.

Do not park the sweeper with a full dustbin.

Cleaning

The suction sweeper may only be cleaned in the off state, when it is

dry (for example: sweeping away).

The suction sweeper is a machine with electrical components.

Caution!

Moisture damages the electronics of the device.

Moisture can result in leakage currents and short-circuits.

Do not use any high-pressure cleaners

Maintenance

Safety information

Only complete the type of maintenance work described in the

following chapter. All other maintenance and upkeep work may only

be carried out by the manufacturer or by companies and persons

authorised by the manufacturer, who are familiar with the relevant

safety specifications, because portable devices in industrial use are

subject to the safety test according to VDE 0701.

Closely follow the steps listed in the maintenance instructions. The

improper completion of maintenance tasks may result in malfunctions

when using the sweeper and may possibly render the warranty

granted null and void.

When working on the electrical system, the battery should be

disconnected.

Maintenance work/ troubleshooting at the electric motor must not be

done while the electric motor is running.

Use only flawless and appropriate tools to complete maintenance

work.

Note the requirements for spare parts (see page.. Spare parts).

If covers and/or safety devices were removed during maintenance

work/repairs, they will have to be reattached prior to starting the

sweeper.

For carrying out any work on the sweeper, it must be switched off and

secured from rolling away by accident.

Table of contents

Other STOLZENBERG Blower manuals

STOLZENBERG

STOLZENBERG CS 650 User manual

STOLZENBERG

STOLZENBERG US 5 User manual

STOLZENBERG

STOLZENBERG Tandem 900 KSE User manual

STOLZENBERG

STOLZENBERG TwinSweep 900E User manual

STOLZENBERG

STOLZENBERG NU9 User manual

STOLZENBERG

STOLZENBERG NU5 User manual

STOLZENBERG

STOLZENBERG MATRIX MTX-900-V TRS User manual

STOLZENBERG

STOLZENBERG KSV 910 User manual

Popular Blower manuals by other brands

Weed Eater

Weed Eater VS2000BV instruction manual

KRAUSMANN

KRAUSMANN U37020-00 Operation manual

Bosch

Bosch ALB 36 LI Original instructions

Cub Cadet

Cub Cadet HB425 Operator's manual

GreenWorks Pro

GreenWorks Pro BLB482 Operator's manual

ARIETE

ARIETE 2768 manual

NuTone

NuTone 331H user guide

GÜDE

GÜDE GLB 200 18 Li-Ion Translation of the original instructions

I.VA.CO.

I.VA.CO. SC Series Operating and maintenance manual

DeWalt

DeWalt DCE100 instruction manual

Becker

Becker SV 7.330 operating instructions

Metabo

Metabo AG 18 Pro instructions

Desa

Desa GA3650TB installation instructions

Echo

Echo Power Blower PB-230LN Operator's manual

Echo

Echo PB-413H Operator's manual

Black & Decker

Black & Decker BV3100 instruction manual

Ryobi

Ryobi RY08570 Operator's manual

Haaga

Haaga 355 user manual