Stihl FSE 60 User manual
Contents
1 Guide to Using this Manual.........................2
2 Safety Precautions and Working Techni‐
ques............................................................ 2
3 Using the Unit............................................. 7
4 Approved Combinations of Cutting Attach‐
ment, Deflector, Handle and Harness.........8
5 Mounting the Drive Tube.............................8
6 Mounting the Loop Handle..........................9
7 Mounting the Deflector................................9
8 Mounting the Cutting Attachment................9
9 Mounting Depth Wheel............................. 10
10 Converting Unit to Power Edger............... 11
11 Connecting to Power Supply.....................11
12 Fitting the Harness....................................12
13 Switching On.............................................12
14 Switching Off.............................................12
15 Overload Cutout........................................12
16 Storing the Machine.................................. 13
17 Maintaining the Mowing Head...................13
18 Maintenance and Care..............................14
19 Minimize Wear and Avoid Damage...........14
20 Main Parts.................................................15
21 Specifications............................................15
22 Maintenance and Repairs......................... 16
23 Disposal.................................................... 16
24 EC Declaration of Conformity................... 16
25 General Power Tool Safety Warnings.......17
1 Guide to Using this Manual
1.1 Pictograms
All the pictograms attached to the machine are
shown and explained in this manual.
1.2 Symbols in text
WARNING
Warning where there is a risk of an accident or
personal injury or serious damage to property.
NOTICE
Caution where there is a risk of damaging the
machine or its individual components.
1.3 Engineering improvements
STIHL's philosophy is to continually improve all
of its products. For this reason we may modify
the design, engineering and appearance of our
products periodically.
Therefore, some changes, modifications and
improvements may not be covered in this man‐
ual.
2 Safety Precautions and
Working Techniques
Special safety precautions must be
observed when working with this
machine because of the very high
speed of its cutting attachment and
the fact that it is powered by electric‐
ity.
Before commissioning, it is important
to read and understand the User
Manual and to keep it in a safe place
for future reference. Failure to
observe the User Manual may lead to
serious or even fatal injury.
Observe the national safety regulations issued,
e.g. by the employers' liability insurance associa‐
tion, social security institutions, occupational
safety and health authorities and other organiza‐
tions.
If you have not used this machine before: Have
your dealer or other experienced user show you
how to handle your machine safely or attend a
specialist course.
Minors should never be allowed to use the
machine – except for young trainees over the
age of 16 when working under supervision.
Children, animals and onlookers must not be
allowed near the machine.
When the machine is not in use, shut it off so
that it does not endanger others. Secure it
against unauthorized use and disconnect the
mains plug.
The user is responsible for accidents or risks
involving third parties or their property.
Do not pass on or lend the machine to persons
who are not familiar with this model and its han‐
dling – always include the User Manual.
Persons who are not able to operate the power
tool safely due to limited physical, sensory or
mental ability may work with it only under super‐
vision or after being instructed appropriately by a
responsible person.
The use of noise-emitting power tools may be
restricted to certain times by national or local
regulations.
Before each use, check that the unit is in proper
condition. Pay special attention to the connecting
cable, mains plug and safety devices.
English
2 0458-282-0121-C
© ANDREAS STIHL AG & Co. KG 2023
0458-282-0121-C. VA1.C23.
Printed on chlorine-free paper
Paper is recyclable.
Original Instruction Manual
0000000880_023_GB
Do not use the connecting cable to pull or trans‐
port the unit.
Disconnect plug from wall outlet before perform‐
ing any work on the machine, e.g. cleaning,
maintenance, replacing parts.
The deflector on this power tool cannot protect
the operator from all objects ejected by the cut‐
ting attachment (stones, glass, wire, etc.). Ejec‐
ted objects may also ricochet and strike the oper‐
ator.
Do not use a high-pressure washer to clean the
power tool. The solid jet of water may damage
parts of the unit.
Do not spray the power tool with water.
2.1 Physical fitness
To operate the power tool you must be rested,
and in good physical condition and mental
health.
If you have any condition that might be aggrava‐
ted by strenuous work, check with your doctor
before operating a power tool.
Do not operate the power tool if you have con‐
sumed alcohol or taken medication which may
impair responsiveness, or taken drugs.
2.2 Accessories and Spare Parts
Only use cutting attachments and accessories
that are explicitly approved for this power tool by
STIHL or are technically identical. If you have
any questions about this, consult your dealer.
Use only high-quality parts and accessories. Oth‐
erwise, there is a risk of accidents and damage
to the unit.
STIHL recommends the use of genuine STIHL
tools and accessories. They are specifically
designed to match the product and meet your
performance requirements.
Never attempt to modify your power tool in any
way since this may increase the risk of personal
injury. STIHL excludes all liability for personal
injury and damage to property caused while
using unauthorized attachments.
2.3 Applications
Depending on the cutting attachment fitted, use
your power tool only for cutting grass, over‐
growth and similar materials.
Do not use the power tool for any other purpose
because of the increased risk of accidents and
damage to the power tool itself. The product
must not be modified in any way - this may also
lead to accidents or damage to the unit.
2.4 Clothing and Equipment
Wear proper protective clothing and equipment.
Clothing must be sturdy but allow
complete freedom of movement.
Wear close-fitting clothing – a boiler‐
suit, not a loose work jacket.
Do not wear clothing which could become trap‐
ped in wood, brush or moving parts of the
machine. Do not wear a scarf, necktie or jewelry.
Tie up and secure long hair above your should‐
ers.
Wear sturdy shoes with non-slip
soles.
WARNING
To reduce the risk of eye injuries,
wear close-fitting safety glasses in
accordance with European Standard
EN 166. Make sure the safety
glasses are a snug fit.
Wear face protection and make sure it is a good
fit. Face protection alone is not sufficient to pro‐
tect the eyes.
Wear "personal" sound protection, e.g. ear
defenders.
Wear sturdy protective gloves made
of a resistant material (e.g. leather).
STIHL offers a comprehensive range of personal
protective equipment.
2.5 Transporting the Unit
Always switch off the machine and unplug it from
the mains plug.
Carry the machine hanging from the shoulder
strap or properly balanced by the shaft or loop
handle.
Transporting by vehicle: Properly secure the
machine to prevent tipping over and damage.
2.6 Before Starting Work
Check the unit
Check that your machine is in safe operating
condition – refer to appropriate sections in the
User Manual:
2 Safety Precautions and Working Techniques English
0458-282-0121-C 3
–The starting lockout lever and trigger switch
must move freely – the switch must return to
the idle position when it is released.
–Use only an approved combination of cutting
attachment, deflector, handle and carrying
strap. All parts must be assembled properly
and securely. To reduce the risk of injury,
never use metal cutting attachments!
–Check that the cutting attachment is properly
and securely mounted and in good condition.
–Check safety devices (e.g., deflector for cut‐
ting attachments) for damage and/or wear.
Always replace damaged parts. Never operate
the unit with a damaged deflector
–Keep the handles dry, clean and free from dirt,
for safe control of the power tool
–Adjust handle to suit your height and reach.
To reduce the risk of accidents and personal
injury, do not operate the unit if it is not in proper
condition!
Only operate the unit if all of its components are
undamaged and securely mounted.
Never attempt to modify the controls or safety
devices.
Before switching on your power tool, make sure
the cutting attachment is not touching the ground
or any other object.
Avoid contact with the cutting attach‐
ment – risk of injury!
Note that the cutting attachment con‐
tinues to run for a short period after
the power tool is switched off – fly‐
wheel effect.
Electrical connection.
Reduce the risk of electric shock:
–Voltage and frequency of the machine (see
rating plate) and the voltage and frequency of
your power supply must be the same.
–Examine the connecting cord, power plug and
extension cord for damage. Damaged cords,
couplings and plugs or connecting cords that
do not comply with the regulations must not be
used
–Always connect the engine analyzer to a prop‐
erly installed wall outlet.
–Check that the insulation of the connection
cable, extension cord, plug and coupling is in
good condition.
–Never touch the power plug, power cord and
extension cord, and electrical plug connec‐
tions with wet hands.
–Any extension cords used must comply with
the specifications for the particular application
Position the connection cable and extension cord
correctly:
–Check minimum cross section of wires (wire
gauge) – see "Connecting to Power Supply".
–To reduce the risk of stumbling, position and
mark the connecting cord so that it cannot be
damaged or endanger others.
–Using unsuitable extension cords can be dan‐
gerous. Only use extension cords that are
approved for outdoor use, are appropriately
labeled and have a sufficient cable cross-sec‐
tion.
–The plug and coupling of the extension cord
must be water-proof and must never be
immersed in water.
–Do not allow cord to rub on edges or pointed
or sharp objects.
–don't trap or squeeze the cord in or under
doors or windows
–If cords are twisted – unplug the power tool
and straighten them out
–Never touch the rotating cutting attachment
–Always unwind the extension cord completely
from the cable reel to reduce the risk of fire
from overheating.
2.7 Holding and Guiding the Tool
Always hold the tool firmly with both hands on
the handles. Make sure you always have a firm
and secure footing.
Always hold the machine on the right-hand side
of your body.
002BA117 KN
Left hand on loop handle, right hand on control
handle, even if you are left-handed.
2.8 While Working
If the power cord is damaged, imme‐
diately disconnect the plug from the
wall outlet to avoid the risk of electric
shock.
English 2 Safety Precautions and Working Techniques
4 0458-282-0121-C
Avoid damage to the power supply cord. Do not
drive over it, pinch or tug it.
Never jerk the connecting cord to disconnect it
from the wall outlet. To unplug, grasp the plug,
not the cord.
The power cord and power plug must never be
touched with wet hands.
Never spray water on the unit – risk of short cir‐
cuit!
The drive motor is not waterproof. To
reduce the risk of a short circuit or
electrocution, never work with the
power tool in the rain or in wet or very
damp locations.
Do not leave the unit outdoors in the rain.
In case of imminent danger or in an emergency,
switch off the motor immediately – release the
trigger switch and starting lockout.
Your power tool is designed to be operated by
one person only. Do not allow other persons in
the work area.
15m (50ft)
There is a risk of accident from ejected objects
within a wide area around the working space, so
you must ensure that there is no-one within a
15 m radius of the machine. This distance must
also be maintained in relation to objects (vehi‐
cles, window panes) – risk of property damage!
Even at distances beyond 15 m, the danger can‐
not be ruled out.
Check the work site – rocks, metal
objects etc. could get caught up and
ejected – potentially beyond a dis‐
tance of 15 m – risk of injury! Such
objects can also damage the cutting
attachment and other property (e.g.
parked vehicles, windows).
Never work without protection suitable for the
respective machine and cutting tool – risk of
injury from ejected objects!
Do not cut wet grass.
Take care in slippery conditions on slopes and
uneven ground.
Keep the connecting cord behind the power tool
at all times – do not walk backwards – risk of
stumbling.
Watch out for obstacles: Tree stumps, roots –
risk of tripping or stumbling!
Only work while standing on the ground, never
on a ladder, work platform or other unstable sur‐
face.
Be particularly alert and cautious when wearing
hearing protection because your ability to hear
warnings (shouts, alarms, etc.) is restricted.
Take breaks when you start getting tired or feel‐
ing fatigue – risk of accidents!
Work calmly and carefully – in daylight conditions
and only when visibility is good. Proceed with
caution, do not put others in danger.
Be particularly careful when working on difficult,
densely grown terrain.
When mowing in high bushes, under shrubbery
and hedges: Hold the cutting tool at a working
height of at least 15 cm – to avoid risks to ani‐
mals.
Check the cutting tool regularly at frequent inter‐
vals, and immediately if you notice a change in
its behavior:
–Switch off the tool, hold it firmly and press the
cutting attachment into the ground to bring it to
a standstill, and disconnect the plug from the
power supply.
–Check condition and tightness of connections,
look out for fine cracks
–Immediately replace defective cutting tools,
also in the event of minor hairline cracks
–Clean grass and plant residue off the cutting
attachment mounting at regular intervals –
remove any accumulated material from the
cutting attachment and deflector.
Always switch off the tool and unplug it from the
power supply before replacing the cutting attach‐
ment. Risk of injury from the motor starting unin‐
tentionally!
Do not continue using or attempt to repair dam‐
aged or cracked cutting attachments by means
of welding, straightening or modifying the shape
(unbalanced).
Particles or pieces may come off and hit the
operator or a bystander at a high speed – risk of
most severe injuries!
If a rotating cutting attachment touches a rock or
another hard object, sparks may be generated
2 Safety Precautions and Working Techniques English
0458-282-0121-C 5
which may possibly ignite combustible materials.
Dried-out plants and undergrowth are combusti‐
ble, especially in hot and dry weather. If there is
a risk of fire, do not use cutting attachments in
the vicinity of combustible materials, dried-out
plants or brushwood. It is mandatory that you ask
the responsible forestry office about current fire
hazards.
Only use the deflector with properly mounted
blade that ensures the mowing line is restricted
to the permissible length.
To reduce the risk of injury, avoid contact with
the blade.
To reduce the risk of injury, always switch off the
tool and unplug it from the power supply before
manually adjusting the mowing line.
Misuse with mowing lines that are too long
reduces the working speed of the engine. This
results in overheating and damage to the motor.
To reduce the risk of injury, never use wire in
place of the nylon cutting line.
If the unit is subjected to unusual stress for which
it was not designed (e.g., heavy impact or a fall),
always check that it is in safe operating condition
before continuing work – see also "Before Start‐
ing Work". Make sure the safety devices are
working properly. Do not continue operating your
machine if it is damaged. In case of doubt, con‐
tact a dealer.
Before leaving the machine unattended: Turn it
off and disconnect the mains plug.
2.9 Vibrations
Prolonged use of the power tool may result in
vibration-induced circulation problems in the
hands (whitefinger disease).
No general recommendation can be given for the
length of usage because it depends on several
factors.
The period of usage is prolonged by:
–Hand protection (wearing warm gloves)
–Work breaks
The period of usage is shortened by:
–Any personal tendency to suffer from poor cir‐
culation (symptoms: frequently cold fingers,
tingling sensations).
–Low outside temperatures.
–The force with which the handles are held (a
tight grip restricts circulation).
Continual and regular users should monitor
closely the condition of their hands and fingers. If
any of the above symptoms appear (e.g. tingling
sensation in fingers), seek medical advice.
2.10 Maintenance and Repairs
Always switch off the machine and disconnect
the plug from the power supply before carrying
out any maintenance work to reduce the risk of
injury from the motor starting unintentionally.
Service the machine regularly. Do not attempt
any maintenance or repair work not described in
the instruction manual. Have all other work per‐
formed by a servicing dealer.
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training
courses and are supplied with the necessary
technical information.
Only use high-quality replacement parts in order
to avoid the risk of accidents and damage to the
machine. If you have any questions in this
respect, consult a servicing dealer.
STIHL recommends the use of genuine STIHL
replacement parts. They are specifically
designed to match your machine model and
meet your performance requirements.
Never attempt to modify your power tool in any
way since this will increase the risk of personal
injury.
Regularly check that the insulation of the power
cord and plug is in good condition and shows no
sign of ageing (brittleness).
Electrical components, e.g. power cord, may only
be repaired or replaced by a qualified electrician.
Clean plastic components with a cloth. Do not
use aggressive detergents. They may damage
the plastic.
Do not spray the machine with water.
Check tightness of mounting screws on safety
devices and the cutting attachment and retighten
if necessary.
Clean cooling air inlets in motor housing as nec‐
essary.
Store the machine is a safe and dry place.
English 2 Safety Precautions and Working Techniques
6 0458-282-0121-C
3 Using the Unit
3.1 Mowing
282BA011 KN
► Hold your trimmer with both hands – right
hand on the control handle – left hand on the
loop handle.
► Stand upright – hold the unit in a relaxed posi‐
tion and always on right side of your body.
► Swing the trimmer steadily to the left and right
like a scythe, while maintaining the required
cutting height.
► Avoid contact with fences, walls, rocks, etc.
since it will result in a higher rate of wear.
3.1.1 Mowing with depth wheel
282BA012 KN
A depth wheel can be quickly fitted to the trim‐
mer (see "Mounting Depth Wheel").
–It limits the cutting range of the mowing line
–reduces the risk of the rotating mowing line
causing damage (e.g. tree bark)
3.2 Edging
282BA013 KN
The unit can be quickly converted to a power
edger (see "Converting Unit to Power Edger").
► Use the unit as shown
► Guide the mowing line along the edge of the
lawn – use the depth wheel (see "Mounting
Depth Wheel") or hold the unit at the right
height.
3.3 Disposal
Do not throw cuttings in the garbage can – they
can be composted.
3 Using the Unit English
0458-282-0121-C 7
4 Approved Combinations of Cutting Attachment, Deflector, Han‐
dle and Harness
Cutting Attachment Deflector Handle Harness
282BA010-A2
34
2
1
4.1 Approved Combinations
Select correct combination from the table accord‐
ing to the cutting attachment you intend to use.
WARNING
For safety reasons no other combinations are
permitted – risk of accidents.
Only mowing heads (1) may be used on trim‐
mers with a curved drive tube and loop handle.
4.2 Cutting Attachments
4.2.1 Mowing heads
1 STIHL AutoCut C 6‑2
4.3 Deflector
2 Deflector with blade, for mowing heads
4.4 Handle
3 Loop handle
4.5 Harness
4 Shoulder strap may be used
5 Mounting the Drive Tube
1
238BA016 KN
3
A
2
A
► Pull the protective cap off the drive tube.
► Push the drive tube (1) into the motor hous‐
ing (2) as far as the mark (A), turning the drive
tube back and forth at the same time.
► Tighten down the screw (3) in the housing
firmly.
English 4 Approved Combinations of Cutting Attachment, Deflector, Handle an…
8 0458-282-0121-C
6 Mounting the Loop Handle
6.1 Mounting the Loop Handle
4
1
2
3
5
A
282BA001 KN
40 mm
► Fit the loop handle (1) on the drive tube at a
distance A of about 30 cm from the control
handle (2).
► Insert the hex nut (3) in the loop handle (1).
► Squeeze the ends of the clamp together, fit
the M6x40 screw (4) with washer (5) from the
other side and tighten down firmly.
6.2 Adjusting Loop Handle to Most
Comfortable Position
► Loosen the screw (4).
► Move the loop handle (1) along the drive tube
to the required position – tighten down the
screw (4) firmly.
7 Mounting the Deflector
1
238BA003 KN
2
► Push the deflector (1) over the clamp (2) as far
as stop.
238BA004 KN
4
3
► Fit the locknut (3) in the hex recess on the
deflector.
► Make sure the holes line up.
► Insert the M6x30 screw (4) and tighten it down
firmly.
8 Mounting the Cutting
Attachment
8.1 Placing Power Tool on the
Ground
238BA021 KN
► Switch off the power tool.
► Lay your trimmer on its back with the loop
handle facing down and the output shaft facing
up.
8.2 Fitting Mowing Head without
Screw Mounting
Keep the supplement sheet for the mowing head
in a safe place!
6 Mounting the Loop Handle English
0458-282-0121-C 9
8.2.1 STIHL AutoCut C 5-2
9
681BA018 KN
Schnur/LINE 2
Schnur/LINE 1
2
8
► Slip the mowing head (2) on to the shaft – as
AutoCut 5-2.
► Turn the spool (9) clockwise until the two
arrow heads line up – secure the spool in this
position.
► Insert the cap (8) in the spool, press it down
as far as stop and turn it clockwise at the
same time.
► Turn the cap until you feel resistance and then
tighten it down firmly by hand.
8.2.2 STIHL AutoCut C 6-2
0000-GXX-3937-A0
2
1
3
4
► Place the mowing head (2) on the shaft (3)
while inserting the internal hexagon (2) on the
hexagon (4)
► Hold the mowing head (2) with your hand.
► Turn cap (1) clockwise and tighten it firmly by
hand.
8.3 Removing the Mowing Head
► Hold the spool housing steady
► Unscrew the cap counterclockwise.
9 Mounting Depth Wheel
The depth wheel is included in the scope of sup‐
ply or is available as a special accessory.
It limits the working range of the mowing line.
–It helps reduce the risk of the rotating mowing
line causing damage (e.g. tree bark).
–It maintains the correct ground clearance
when edging.
3
282BA014 KN
1
2
B
CA
The depth wheel (1) can be locked in three differ‐
ent positions (A, B or C) on the support (2). This
allows the reach of the mowing line to be varied.
A Working range of mowing line extends
beyond the outside diameter of the depth
wheel, e.g. for lawn edging.
B Working range of mowing line extends up to
outside diameter of depth wheel.
C Working range of mowing line does not reach
as far as outside diameter of depth wheel,
e.g. for mowing around trees.
9.1 Mounting Depth Wheel on Sup‐
port
3
282BA014 KN
1
2
B
CA
► Push the depth wheel (1) into the required
position on the support (2) until the locking
hooks (3) engage.
English 9 Mounting Depth Wheel
10 0458-282-0121-C
Other manuals for FSE 60
14
This manual suits for next models
2
Table of contents
Other Stihl Trimmer manuals
Stihl
Stihl FSE 60 User manual
Stihl
Stihl FR 410 C User manual
Stihl
Stihl HS 46 User manual
Stihl
Stihl Operating instructions User manual
Stihl
Stihl HS 45 User manual
Stihl
Stihl FSE 52 User manual
Stihl
Stihl HSA 65 User manual
Stihl
Stihl FS 55 User manual
Stihl
Stihl FSA 65 User manual
Stihl
Stihl HS 86 User manual
