Stihl TS 700 User manual
04-015
1
04-015
14” CUT-OFF SAW
Gas Powered Stihl 700
PROCEDURES:
•Unit will be sent with 50:1 gas mixture, wrench and goggles.
•Use only in well ventilated areas. Gas fumes are hazardous!
•Area must be clear of any debris before cutting.
•Determine what type of material is to be cut. Asphalt, concrete, metal and ductile blades are
available. 6300 rpm or faster are required.
•Blades must have a 20mm arbor.
•SHUTDOWN: Allow engine to idle down approximately 5 minutes to reduce engine heat
from burning protective coating of oil in cylinder.
•Customer should clean air filter after every four hours of usage.
•Customer will be instructed on proper filter and gasket combination. Exploded view diagram
provided on back of page.
•Consult owner’s manual for changing position of blade.
•Customer will be charged for any clean up or damage due to neglect.
SPECIFICATIONS:
2 Cycle Engine
9,800 RPM
50:1 Mixture
6.1 Cu In. - 6.7 bhp
Fuel Capacity: 26.2 oz.
Depth: 4.9”
Arbor: 20 mm
Weight: 26.2 lbs
04-015
2
Troubleshooting:
If the unit does not start:
1. Check to make sure the filter is not completely plugged with concrete dust.
2. Check fuel level.
3. Remove and clean spark plug. Pull start unit without spark plug to remove any excess
fuel from cylinder.
Other manuals for TS 700
6
Table of contents
Other Stihl Saw manuals
Stihl
Stihl TS 700 User manual
Stihl
Stihl FS 460 C Manual
Stihl
Stihl TS 420 User guide
Stihl
Stihl TS 400 Cutquick Manual
Stihl
Stihl HTA 65 User manual
Stihl
Stihl TS 440 User manual
Stihl
Stihl TS 700, TS 800 User manual
Stihl
Stihl TS 480i User manual
Stihl
Stihl TS 510 Cutquik User manual
Stihl
Stihl TSA 230 User manual
Stihl
Stihl TS 480i User manual
Stihl
Stihl Cutquik TS 410 User manual
Stihl
Stihl TS 410 User manual
Stihl
Stihl 038 User manual
Stihl
Stihl 2016-07 User manual
Stihl
Stihl TSA 230 User manual
Stihl
Stihl TS 350 User manual
Stihl
Stihl TSA 230 User manual
Stihl
Stihl TSA 230 User manual
Stihl
Stihl FS 500 User manual
