STIGO Stigobike User manual
TABLE OF CONTENTS
1. BOX CONTENTS
2. DISCLAIMER, COPYRIGHT NOTICE AND TRADEMARKS
3. STANDARDS
4. BEFORE YOU BEGIN
5. OPENING THE BOX
6. MIRROR INSTALLATION (NOT APPLICABLE TO ALL MODELS)
7. STIGO SCOOTER DETAILS
8. STIGO SCOOTER DISPLAY DETAILS
9. HOW TO UNFOLD version1
HOW TO UNFOLD version2
10. HOW TO FOLD
11. STARTING A STIGO
12. CHARGING
13. PRE-RIDE INSTRUCTIONS
14. IMPORTANT COMPONENTS
15. SAFETY AND WARNINGS - MODIFICATIONS AND
RIDING IN ICY/WET CONDITIONS
16. WARRANTY
17. SERVICE
18. DISPOSAL AT END-OF-LIFE
Need help?
For replacement parts, product support and a list of authorised
service centres, visit our website at www.stigobike.com
14.1 BRAKES
14.2 KICKSTAND
14.3 CHARGER
14.4 FRAME AND FRAME NUMBER
14.5 BATTERIES
14.6 TIRES
1. BOX CONTENTS
2. DISCLAIMER, COPYRIGHT NOTICE AND TRADEMARKS
3. STANDARDS
Stigo scooter
Charger
Electronic key
Mirror and Allen key for mounting (optional)
Manual
The performance, information and specifications of the Stigo and other
products manufactured by or sold under the license of Stigo Ltd and
featured in this document may change without notice. It is the responsi-
bility of the user to determine the appropriate and safe conditions to use
the products and to periodically check the product to ensure secure and
proper operation. To the extent permitted by law, any liability that may
be incurred as a result of use of a product manufactured by or sold
under a license granted by Stigo Ltd is limited to the cost of repairing or
replacing the failed product or component at the discretion of Stigo Ltd
and does not extend to any loss or damage which may be caused as a
consequence of misuse or failure of the product. Damage to the prod-
uct, other property or any persons are the responsibility of the user of
the Stigo product. By using a product manufactured by or sold under a
license granted by Stigo Ltd, you state that you have read this disclaimer
and agree to hold Stigo Ltd, its owners and any of its employees or direc-
tors free from all liabilities, and that you agree to use and operate the
product at your own risk.
Stigo and Stigobike are registered trademarks of Stigo Ltd. The trade-
marks and logo of Stigo cannot be used without the express written
approval of Stigo Ltd.
The Stigo is an L1e category electric powered moped/scooter developed
in accordance with the following EU directives:
2002/24/EC
2013/60/EC
© Copyright Stigo Ltd. All rights reserved.
4. BEFORE YOU BEGIN
5. OPENING THE BOX
Please read and understand this manual prior to using your Stigo for the
first time. There are many cautions and warnings, which, if ignored, may
increase the risk of damaging the Stigo, cause injuries or invalidate the
warranty.
This manual was written to help you achieve optimal performance, com-
fort, enjoyment and safety when riding your Stigo scooter. The manual
describes care, maintenance and usage procedures that ensure years of
trouble-free riding and keep the product covered by warranty. It is impor-
tant to understand your new Stigo scooter, its features and its operation, to
acheive maximum enjoyment with maximum safety. By reading this
manual before riding your Stigo scooter for the first time, you will know
how to get the most from your Stigo. It is also important that your first ride
on a Stigo scooter is taken in a controlled environment, away from traffic
and obstacles.
Riding a Stigo or any other electric vehicle involves the risk of damage to
the Stigo, injury or death, particularly if use of the vehicle takes place in
busy urban environment. Please understand these risks and carefully read
the manual to help prevent accidents. Please do not attempt to use the
Stigo beyond the limits of your ability or those of the product itself.
Remove the contents from the box. Remove any separators that protect
the components from damage during shipping. Inspect the contents of the
box for visual defects that may have occurred during shipping. As the Stigo
was 99% assembled (except for the mirror) and carefully packed at the
factory there should not be any problems, even if the box arrives slightly
damaged.
The only assembly required by you is installing the mirror that should not
take more than a few minutes. If you do not feel confident doing it yourself,
please seek assistance from a service specialist.
6. MIRROR INSTALLATION (NOT APPLICABLE TO ALL MODELS)
Required tool for mirror mounting
(included in the accessory box):4mm Allen key.
Remove the endcap from
the left side end of the
handlebar.
Insert the mirror
into the handlebar.
Fasten the bolt inside
the mirror with the
supplied Allen key
until the mirror is firmly
fixed to the handlebar.
7. STIGO SCOOTER DETAILS
Rear lock opening lever
Front lock opening lever
Throttle
ON/OFF switch
Horn switch
Mirror
Rear brake lever
Front brake lever
Light
Horn
Frame number.
Starts with V6G
Kickstand
Motor
Transportation wheels
Status indicator - white = power on / red = charging / green = fully charged
Odometer
Speed reading
Speed unit
Battery level
8. STIGO SCOOTER DISPLAY DETAILS
2
3
4
5
1
Hold the Stigo in an upright position.
Grabbing the center of the handlebar with your
left hand, slightly tilt the Stigo forward and locate
the front lock opening lever.
Using the other hand, pull the front lock
opening lever with your thumb.
Tilt the Stigo further down and bring the
handlebar upwards until your hear the
CLICK, that locks the mechanism.
9. HOW TO UNFOLD version 1
Place your foot on the
footrest.
Hold the Stigo in an upright position.
Push down on the footrest
until you hear the CLICK,
that locks the mechanism.
HOW TO UNFOLD version 2
Grabbing the center of the handlebar with
your left hand, slightly tilt the Stigo forward
and locate the front lock opening lever.
Table of contents
Other STIGO Scooter manuals
