Steltronic ST-HB32 Operating manual
Steltronic
ST-HB32 LCD 32” 16/9 Monitor
User and Installation Manual
Steltronic S.p.A.
Via Artigianale 34, 25082 Botticino Sera Brescia - Italy
Tel: +39 030 2190811 fax: +39 030 2190798
http://www.steltronic.com
Worldwide Service: + 39 030 2190830
Email: service@steltronic.com
US Steltronic: +1 (909) 287-0712
service.usa@steltronic.com
Pg. 2 of 28
Rev A.
STELTRONIC S.p.A.
Botticino Sera (BS) - ITALY
Tel +39 030 2190811 - Fax +39 030
2190798 http://www.steltronic.com
Steltronic
ST-HB32 LCD 32”
16/9 Monitor
User and Installation Manual June 2007
Index
MONITOR ADJUSTMENTS and TECHNICAL SPECIFICATIONS
1.0 Monitor technical specification Pg. 03
2.0 OSD Screen Adjustments Pg. 05
MONITOR’S INSTALLATION
3.0 Pre-installation requirements Pg. 11
4.0 Monitor dimensions Pg. 12
5.0 Available monitor supports Pg. 13
5.1 Fixing the Brackets to the ceiling Pg. 14
5.2 Assembly the Frame for single monitor [Configuration A] Pg. 17
5.3 Hanging 2 near monitors [Configuration B] Pg. 18
5.4 Hanging 2 monitors with Central Plate [Configuration C] Pg. 19
5.5 Hanging 3 near monitors [Configuration D] Pg. 21
6.0 Connecting the Lane computer (SUPERELEX) to the monitor Pg. 23
6.1 Wins software settings for 16:9 monitors Pg. 24
6.1 Connecting the Lane computer (V.L.C.) to the monitor Pg. 25
7.0 Display Video signal (Superelex lane computer) Pg. 26
7.1 Display Video signal (V.L.C. lane computer) Pg. 27
Pg. 3 of 28
Rev A.
STELTRONIC S.p.A.
Botticino Sera (BS) - ITALY
Tel +39 030 2190811 - Fax +39 030
2190798 http://www.steltronic.com
Steltronic
ST-HB32 LCD 32”
16/9 Monitor
User and Installation Manual June 2007
[1.0] Monitor Technical specifications
[1.1] General description
ST-HB32A1X is a 32” TFT Liquid Display with 16-CCFL Backlight unit and 1-ch LVDS interface.
This display supports 1366x 768 WXGA format and can display true 16.7M colours (8-bit/color).
The inverter module for backlight is built-in.
NOTE: the monitor is not equipped with speakers and RF module for Radio Frequency TV reception.
[1.2] Features
- High brightness (500 nits)
- High contrast ratio (1200:1)
- Fast response time ( Gray to Gray average 6.5 ms)
- High colour saturation NTSC 75%
- Max resolution 1360 x 768@60 Hz
- LVDS interface
- Low colour shift function option
- Ultra wide viewing angle :176(H)/ 176(V) Super MVA technology
-Support PIP/PAP function
- Configurable ambient light sensor
- VGA/DVI input support Video sync – 720p
- OSD menu controls by Remote controller, OSD button& RS232C controller
[1.3] General Specifications
Active Area 708.954mm(H) x 398.592mm(V) (32.02”diagonal)
Bezel Opening Area 714.96mm(H) x 404.6mm(V)
Driver Element a-si TFT active matrix
Pixel Number 1366 x R.G.B x 768 pixel
Pixel Pitch(sub-Pixel) 0.1730(H) x 0.5190(V)
Pixel Arrangement RGB vertical stripe
Display Colours 16.7M Color
Display operation Mode Transmissive mode / Normally black -
Surface Treatment Anti-Glare coating(Haze 25%), Hard coating (3H)
[1.4] Electrical Specifications [a]
Power source Power Input 100VAC~240VAC (Worldwide)
Operation Mode 250W (Max) Power
consumption Power Saving Mode 20W(Max) W
Storage Temper. Min -20 ~ Max60 Celsius
Operating Temper. Min 5 ~ Max 40 Celsius
Pg. 4 of 28
Rev A.
STELTRONIC S.p.A.
Botticino Sera (BS) - ITALY
Tel +39 030 2190811 - Fax +39 030
2190798 http://www.steltronic.com
Steltronic
ST-HB32 LCD 32”
16/9 Monitor
User and Installation Manual June 2007
[1.5] Electrical Specifications [b]
LCD PANEL:
Max.Resolution 1360 x 768@ 60Hz -
Brightness 500 Nits
Contrast Ratio 1200
Response time Typ. 6.5 ms(Gray to Gray) ms
Aspect Ratio 16 :9
GRAPHIC:
Separate Sync. LVDS Level -
Horizontal Sync. Positive / Negative -
Vertical Sync. Positive / Negative -
Input Connector D-Sub 15 pins, DVI-D 24 pins, -
SCAN RATE:
Horizontal 26~91 KHz
Vertical 50~85 Hz
PERFORMANCE:
Auto Adjust Clock, Phase, H-Position &-V Position -
Screen Scaling VGA/SVGA/XGA/WXGA - Full Screen Display
Power Management VESA DPMS, DVI DMPM -
Color Adjustment User, 6500K, 5400K ,3200K & 9300K -
OSD Language English
[1.6]Safety
This Product was tested to the following standards and found Compliance with the following standards:
FCC：CFR47 Part 15 / CISPR 22 3rd Edition：1997, Class B
ANSI C63.4. 2003
Canadian ICES-003
CE：EN 55022. 1998+A1. 2000+A2. 2003, Class B
EN 55024. 1998+A1. 2001+A2. 2003 IEC 61000-4 Series
EN 61000-3-2. 2000& EN61000-3-3. 1995+A1. 2001
UL：UL 60950-1. 2003, First Edition
CSA C22.2 No. 60950-1-03 1stEd.April 1, 2003
TUV: EN 60950-1/A11:2004
[1.7] Dimensions and weight
Dimension(w/o stand) 671.2*413.2*82.32 (W*D*H) mm
Net weight 16.5 KG Physical
Gross weight 20 KG
Pg. 5 of 28
Rev A.
STELTRONIC S.p.A.
Botticino Sera (BS) - ITALY
Tel +39 030 2190811 - Fax +39 030
2190798 http://www.steltronic.com
Steltronic
ST-HB32 LCD 32”
16/9 Monitor
User and Installation Manual June 2007
[2.0] OSD Screen Adjustments
The monitor could be adjusted using the Remote control or directly from OSD panel accessible on rear
of the monitor. Main power switch is located on the rear of the monitor, close to the AC plug input.
monitor’s rear
OSD panel
Remote Control
[1] Power ON/STANDBY
[2] Enter – Activate selection
[3] Menu RIGHT
[4] Menu LEFT
[5] Menu DOWN
[6] Menu UP
[7] MENU (Exit)- Access Main Menu/sub-
menu(Quick menu selection)
[8] EXIT (one Level UP)
[9] AUTO –Adjust clock, phase, H position,
V position automatically
[10] PIP (picture in picture)
[11] SOURCE (input source selection)
[12] SWITCH (PIP switch)
Main Power
Switch
OSD
Control panel
1
1
3
7
2
2
3
4
5
6
4
6
5
7
8
9
1
0
11
12
Pg. 6 of 28
Rev A.
STELTRONIC S.p.A.
Botticino Sera (BS) - ITALY
Tel +39 030 2190811 - Fax +39 030
2190798 http://www.steltronic.com
Steltronic
ST-HB32 LCD 32”
16/9 Monitor
User and Installation Manual June 2007
WARNING:
The SOURCE input Selection for Scoring is VGA
The Monitor detect automatically the active Source, if the Lane computer it will be power
off/restart, monitor switch the screen on the next available source (if connected).
To switch the screen back to SCORE press vary time SOURCE button on remote control
until the VGA input will be display on OSD message.
Factory DEFAULT SETTINGS AND ADJUST RANGE
Item Factory Default Adjust Range
Power Switch OFF ON/OFF
Brightness 80 0~100
Contrast 50 0~100
Color Temperature User USER/6500K/9300K
Red 50
0~255
Green 50
0~255
Blue 50
0~255
OSD Language English English
Auto configuration ON ON/OFF
SUGGESTED MONITOR SETTINGS FOR STELTRONIC SCORE
[1]INPUT SOURCE
Press vary time SOURCE button on Remote control until VGA screen appear on OSD
[2] MENU DISPLAY
Press <MENU> <ENTER> <Arrow DOWN> to display the Menu; use <Arrow LEFT>
<Arrow RIGHT> for changing value.
Brightness 60 Contrast 60
Hue 8 Saturation 70
Flesh-Tone OFF Black Level 55
[3] MENU IMAGE
Press <MENU> <ENTER> <Arrow RIGHT> <Arrow DOWN> to display the Menu; use
<Arrow LEFT> , <Arrow RIGHT> for changing value.
Scaling FILL Noise Reduction OFF
Angle Filtering OFF Film Mode Detect ON
Sharpness 15
Pg. 7 of 28
Rev A.
STELTRONIC S.p.A.
Botticino Sera (BS) - ITALY
Tel +39 030 2190811 - Fax +39 030
2190798 http://www.steltronic.com
Steltronic
ST-HB32 LCD 32”
16/9 Monitor
User and Installation Manual June 2007
OSD tree menu
Pg. 8 of 28
Rev A.
STELTRONIC S.p.A.
Botticino Sera (BS) - ITALY
Tel +39 030 2190811 - Fax +39 030
2190798 http://www.steltronic.com
Steltronic
ST-HB32 LCD 32”
16/9 Monitor
User and Installation Manual June 2007
Pg. 9 of 28
Rev A.
STELTRONIC S.p.A.
Botticino Sera (BS) - ITALY
Tel +39 030 2190811 - Fax +39 030
2190798 http://www.steltronic.com
Steltronic
ST-HB32 LCD 32”
16/9 Monitor
User and Installation Manual June 2007
Pg. 10 of 28
Rev A.
STELTRONIC S.p.A.
Botticino Sera (BS) - ITALY
Tel +39 030 2190811 - Fax +39 030
2190798 http://www.steltronic.com
Steltronic
ST-HB32 LCD 32”
16/9 Monitor
User and Installation Manual June 2007
Next chapters
are for
installation crew only
Table of contents
