Steelcase Avenir User manual

Page 1 of 3

939501454 Rev A

Avenir®Cable Connect Box

If you have a problem, question, or request, call

your local dealer, or Steelcase Line 1 at

888.STEELCASE (888.783.3522)

for immediate action by people who want to help you.

(Outside the U.S.A., Canada, Mexico, Puerto Rico,

and the U.S. Virgin Islands, call: 1.616.247.2500)

Or visit our website: www.steelcase.com

Grand Rapids, MI 49501

U.S.A.

Printed in U.S.A.

FACEPLATE (AT&T)

FACEPLATE (AMP)

BOX HALF

WINDOW

BOX HALF ASSEMBLY

DOUBLE FACED TAPE

COVER PLATE

HANGER BRACKET

LH SHOWN - RH TYPICAL

HANGER BRACKET

ELECTIVE ELEMENTS

BASE

5/32” Bit

Page 2 of 3

939501454 Rev A

1a.

1b.

HANGER BRACKET

LH SHOWN - RH TYPICAL

BOX HALF ASSEMBLY

ELECTIVE

ELEMENTS

BRACKET

(NON HANDED)

PANEL ASSEMBLY

SERIES 9000

VALENCIA

AVENIR

ELECTIVE

ELEMENTS

BLUNT NOSE SELF TAPPING SCREWS

DOUBLE FACED TAPE

WORKSURFACE

Cable connect box assembled onto

structural panels

1a. Select the proper style bracket, either a right

or left hand hanger bracket for Series 9000,

Valencia and Movable Walls panels or the (non-

handed) Elective Elements hanger bracket.

Secure bracket to the back side of box half with (2) self

tapping screws. Hook assembly onto panel

assembly. Proceed to Step 2.

Cable connect box assembled onto the

top of a desk or worksurface

1b. Secure rear cover plate to box half assembly

with (2) screws. Remove protective paper form

one side of double faced tape and apply onto side

of box half assembly. Remove remaining

protective paper from tape and adhere box half

assembly onto a desk or worksurface in desired

location. Proceed to Step 2.

REAR

COVER

PLATE

8-32 X 3/8” BLUNT NOSE

SELF TAPPING SCREW

Page 3 of 3

939501454 Rev A

1c.

BOX HALF ASSEMBLY

BASE

FACEPLATE (AT&T)

FACEPLATE (AMP)

BOX HALF

WINDOW

TO BE INSERTED IN UNUSED

OPENING AS REQUIRED

BOX HALF

ASSEMBLY

Cable connect box assembled under

bottom of desk or worksurface

1c. Secure base to back side of box half

assembly with (2) screws. Locate box half

assembly to a desired location and use as template

to drill (2) 5/32” dia. holes 3/4” deep into the bottom

of worksurface. Attach with (2) screws. Proceed to

Step 2.

NOTE: For steel worksurfaces, drill holes into hat

section braces.

2. Install cable windows as required. (windows

may be broken in half for a smaller dia. cable

passage). Position box half and desired face plate

and secure with required screws.

NOTE: Some prewiring may be required!

SCREW 10 X 7/8”

WORKSURFACE HOLES

5/32” X 3/4” DEEP

NOTE: MARK OR TAPE

DRILL FOR 3/4” DEPTH

8-32 X 3/8” BLUNT

NOSE SELF

TAPPING SCREW

Other Steelcase Cable Box manuals

Steelcase

Steelcase DSTRAYLG User manual

Popular Cable Box manuals by other brands

FBS

FBS C01 installation instructions

peerless-AV

peerless-AV IBA2 Installation and assembly

Extron electronics

Extron electronics Cable Cubby 1202 installation guide

peerless-AV

peerless-AV IBA3AC Installation and assembly

Channel Vision

Channel Vision AFFINITY P-0328 instructions

Minebea Intec

Minebea Intec IE11357 operating instructions

StarTech.com

StarTech.com BOX4CABLE manual

Commercial Electric

Commercial Electric 5053-WH installation guide

Motorola

Motorola DCT6412 DUAL-TUNER DVR AND HD SET-TOP - MICROSOFT... User's reference manual

Renkforce

Renkforce 1395556 operating instructions

Huawei

Huawei FAT9102SD-32G Quick installation guide

VISSEM Electronics

VISSEM Electronics Opticube VSOF-OTB-E manual

Beta

Beta 1844 15-H05/SCK Instructions for use

FSR

FSR FL-1550 installation instructions

Renkforce

Renkforce 1674559 operating instructions

Minebea Intec

Minebea Intec PR 6130/64Sa installation manual

KS Tools

KS Tools efuturo Wallbox operating instructions

Chatsworth Products

Chatsworth Products Evolution installation instructions