StarTech.com SAT5210U2E User manual
SATA Optical Drive Enclosure
5.25” USB 2.0 eSATA to SATA
Optical Drive External Enclosure
SAT5210U2E
Instruction Manual
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an
endorsement of the product(s) to which this manual applies by the third-party company
in question. Regardless of any direct acknowledgement elsewhere in the body of
this document, StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this
manual and related documents are the property of their respective holders.
i
Table of Contents
Introduction..................................................................... 1
Packaging Contents.....................................................................1
System Requirements .................................................................1
Installation....................................................................... 2
Hardware Installation...................................................................2
Driver Installation.........................................................................4
How to Use ...................................................................... 4
Specifications.................................................................. 6
Technical Support........................................................... 7
Warranty Information ...................................................... 7
1
Introduction
Thank you for purchasing a StarTech.com InfoSafe 5.25” eSATA/USB
2.0 SATA Optical Drive External Enclosure. This versatile solution
provides a cost-effective way to turn any 3.5” SATA 1.5/3.0 Gbps hard
drive, or 5.25” optical drive into an external solution. Equipped with both
USB 2.0 and eSATA interfaces for maximum data transfer capability
and convenient connectivity to the host computer, SAT5210U2E
protects installed drives with a sturdy yet attractive aluminum casing
and a 40mm fan to help cool the drive for optimal performance.
Packaging Contents
1 x SAT5210U2E enclosure•
1 x USB A-B cable•
1 x Screw kit•
1 x Installation CD•
1 x Instruction Manual•
System Requirements
USB and/or eSATA enable computer system•
Microsoft Windows• ®98SE/ME/2000/XP/Vista, or Mac OS®X
2
Installation
Hardware Installation
Loosen the Retaining Screws, on the rear panel. Please note that1.
these screws do not need to be removed, rather loosened enough to
allow the Hard Drive Tray to slide out from the enclosure.
Slide the Drive Tray out from the Enclosure.2.
Connect the drive you wish to install (hard drive, optical drive) to the3.
SATA data and power cables provided by the circuit board attached
to the Drive Tray:
USB connector
eSATA connector
Power connector
Power Switch
Cooling Fan
Retaining Screws
3
Once the drive interface connection has been made, please fasten4.
the drive (label side up) to the Drive Tray using the screws provided:
If installing a 3.5” hard drive, please skip to step #6. If installing an5.
optical drive:
Once the SATA connections to the drive have been secured, and
the drive has been fastened to the Drive Tray, remove the plastic
cover from the Front Panel as pictured below, to allow access to an
installed optical drive.
Apply gentle pressure from left to right (with Enclosure facing you) to
loosen the plastic cover. Once loosened, gently pry the plastic cover
away from the Enclosure.
Slide the Drive Tray (with drive installed) into the Drive Enclosure,6.
and tighten the Retaining Screws (loosened in step #1) on the front
panel to secure the tray within the Enclosure. Installation is now
complete:
4
Driver Installation
Windows 98SE/ME
To install the necessary drivers, insert the Driver CD (included) into the
CD/DVD drive:
When the Add New Hardware Wizard appears, please click on Next.1.
Select Search for the best driver for your device (Recommended)2.
and click on Next.
You will be asked to specify the location of the Windows 98 driver.3.
Please ensure that Specify a location and CD-ROM drive are
selected (with checkmarks) and click on Browse to locate the driver
file (D:\JM20336_Win98 driver), where D: designates the CD/DVD
drive. Once the file has been located, click on Next.
Once Windows has located the necessary file, click on Next.4.
Once Windows finishes installing the software that your hardware5.
device requires, click on Finish to conclude installation.
Windows 2000/XP/Vista, Mac OS X
No driver installation is required for these operating systems, as this
enclosure is natively supported, so the drivers are already installed.
How to Use
Once the drive has been secured within the enclosure, it can be
connected to the host computer while the host computer is powered
on.
If you will be using an eSATA connection, insert one of the
connectors provided by an eSATA cable (not provided - please see
Accessory Products from StarTech.com for a solution), or the USB
type B connector provided by a USB A-B cable (provided), into the
corresponding port on the rear panel of the Drive Enclosure.
Connect the remaining end of the eSATA or USB cable to an available
eSATA or USB type A port on the host computer as necessary.
5
Insert the cylindrical, metal connector provided by the Power Adapter
(included) into the DC Power Port located on the rear panel of the
Enclosure. Connect the remaining end of the Power Adapter to an
available power outlet.
Move the Power Switch on the rear panel of the Enclosure to the
ON position. If the Enclosure is connected to a host computer that is
running Windows ME or above, or Mac OS 9.x or higher, the operating
system on the host computer will detect that the connection is present,
and install the necessary drivers. If the host computer is running
Windows 98SE, please follow the instructions listed in the next section,
titled Driver Installation.
If you are installing an optical drive, such as a CD/DVD drive etc., you
may be required to install software that is specific to the drive. If this
is the case, please ensure you have the files available from the drive
manufacturer. For further information on this step, please consult the
documentation that accompanied the optical drive.
6
Specications
Bus Interface USB 2.0
SATA 3.0Gb/s
External Connectors
1 x USB type B
1 x eSATA
1 x Power Connector
Fans 1 x 40mm
LEDs Power
Chipset ID JMicron JMB20336
Maximum Data Transfer Rate USB 2.0: 480Mb/s
eSATA: 3.0Gb/s
Power Adapter 12VDC, 2A, center positive
Dimensions 259.0mm x 166.0mm x 58.0mm
Weight 930g
Compatible Operating
Systems
Windows 98SE/ME/2000/XP/
Vista, Mac OS X
7
Technical Support
StarTech.com’s lifetime technical support is an integral part of our
commitment to provide industry-leading solutions. If you ever need
help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and
downloads.
Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in
materials and workmanship for the periods noted, following the initial
date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion.
The warranty covers parts and labor costs only. StarTech.com does
not warrant its products from defects or damages arising from misuse,
abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA
LLP (or their officers, directors, employees or agents) for any damages
(whether direct or indirect, special, punitive, incidental, consequential, or
otherwise), loss of profits, loss of business, or any pecuniary loss, arising
out of or related to the use of the product exceed the actual price paid
for the product. Some states do not allow the exclusion or limitation of
incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
Other manuals for SAT5210U2E
1
Table of contents
Other StarTech.com Enclosure manuals
StarTech.com
StarTech.com SMS1BMU313 User manual
StarTech.com
StarTech.com IDE1810U2Z User manual
StarTech.com
StarTech.com SAT1810U2 User manual
StarTech.com
StarTech.com S352BU33RER User manual
StarTech.com
StarTech.com SATSASBAY425 User manual
StarTech.com
StarTech.com DRW110ATA Manual
StarTech.com
StarTech.com 8STS251BPU31C3 User manual
StarTech.com
StarTech.com SAT2510BU2E User manual
StarTech.com
StarTech.com IDECASE35U2B User manual
StarTech.com
StarTech.com M2E1BMU31C User manual
StarTech.com
StarTech.com RK1219WALH User manual
StarTech.com
StarTech.com RK1219WALL User manual
StarTech.com
StarTech.com InfoSafe S252U2ERR User manual
StarTech.com
StarTech.com SAT3510U2F User manual
StarTech.com
StarTech.com S3520WU33ER System manual
StarTech.com
StarTech.com InfoSafe UNI3510U2EB User manual
StarTech.com
StarTech.com RK1232WALHM User manual
StarTech.com
StarTech.com RK1224WALHM User manual
StarTech.com
StarTech.com S3510BMU33T System manual
StarTech.com
StarTech.com S351BMU33ET User manual
