StarTech.com InfoSafe SAT2510BU2B User manual

Manual Revision: 11/25/2011

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

SAT2510BU2B

2.5in USB 2.0 One Button SATA External

Hard Drive Enclosure

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and

Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction............................................................................................1

Packaging Contents ................................................................................................................................. 1

System Requirements.............................................................................................................................. 1

Installation ..............................................................................................1

Hardware Installation .............................................................................................................................. 1

Driver Installation...................................................................................................................................... 3

Backup Software Installation ................................................................................................................ 3

Specications..........................................................................................5

Technical Support ..................................................................................6

Warranty Information............................................................................6

Instruction Manual

Introduction

Packaging Contents

• SAT2510BU2B enclosure

• USB ‘Y’ Cable

• User Manual

• Software CD

• Foam Pad

System Requirements

• USB 2.0 enabled computer

• Microsoft Windows®XP/Vista/7/ Mac OS®X

Installation

Hardware Installation

1. Open the case by pinching the ejection pinhole with a small tipped object and

sliding o the back cover of the case.

Instruction Manual

2. Place the HDD into the case and slide it into the SATA connector.

3. Place the foam to ll up the gap between the HDD and enclosure. Assemble the

case by sliding on the back cover. No screw is needed.

Instruction Manual

Driver Installation

Microsoft Windows® 2000 or later, and Mac OS® 10.x do not require driver installation,

as this enclosure is natively supported.

Backup Software Installation (Windows Only)

1. Insert the software CD into the CD-ROM drive.

2. If Autorun does not play automatically, double-click “autorun.exe”from the CD.

3. Follow the instructions in the pop-up window for installing the OTB Software.

4. Once the Setup Wizard is complete, the Registration window should open. Enter the

Registration Key on the CD and click “Register”.

5. Double-click “Backup4all” icon on the desk-top. Click “Tools” on the pop-up windows

then select “Options”. Check the Enable “One Touch Backup” column.

Instruction Manual

1One Touch Backup Button

2Ejection pinhole

3USB connector

4DC power input (adapter or USB-DC

cable)

Instruction Manual

Specications

Interface USB 2.0 (backwards compatible with

USB 1.x)

External Connectors 1 x USB type B

1 x DC power connector

Internal Connectors 1 x 7-pin SATA data

1 x 15-pin SATA power

Hard Drive type 2.5” SATA hard drive, 9.5mm height

Maximum Data Transfer Rate USB - 480 Mbps

LEDs 1 x blue (power)

Dimensions 135mm x 77mm x 16mm

Operating System Support Windows® 2000/XP/Vista/7/ Mac

OS® X

Instruction Manual

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to

provide industry-leading solutions. If you ever need help with your product, visit

www.startech.com/support and access our comprehensive selection of online tools,

documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.

In addition, StarTech.com warrants its products against defects in materials

and workmanship for the periods noted, following the initial date of purchase.

During this period, the products may be returned for repair, or replacement with

equivalent products at our discretion. The warranty covers parts and labor costs only.

StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their

ocers, directors, employees or agents) for any damages (whether direct or indirect,

special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,

or any pecuniary loss, arising out of or related to the use of the product exceed the

actual price paid for the product. Some states do not allow the exclusion or limitation

of incidental or consequential damages. If such laws apply, the limitations or exclusions

contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.

StarTech.com is your one-stop source for every connectivity part you need. From

the latest technology to legacy products — and all the parts that bridge the old and

new — we can help you nd the parts that connect your solutions.

We make it easy to locate the parts, and we quickly deliver them wherever they need

to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to

the products you need in no time.

Visit www.startech.com for complete information on all StarTech.com products and

to access exclusive resources and time-saving tools.

StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology

parts. StarTech.com was founded in 1985 and has operations in the United States,

Canada, the United Kingdom and Taiwan servicing a worldwide market.

Other manuals for InfoSafe SAT2510BU2B

Table of contents

Other StarTech.com Enclosure manuals

StarTech.com

StarTech.com M2E1BRU31C User manual

StarTech.com

StarTech.com 8STDRW150SATBK User manual

StarTech.com

StarTech.com SAT2MSAT25 User manual

StarTech.com

StarTech.com S252BU313R User manual

StarTech.com

StarTech.com SAT3510U2V User manual

StarTech.com

StarTech.com S251SMU33EP User manual

StarTech.com

StarTech.com RK2537BKM User manual

StarTech.com

StarTech.com S2510BU3PWPS User manual

StarTech.com

StarTech.com SAT3550ESR User manual

StarTech.com

StarTech.com RK9WALM User manual

StarTech.com

StarTech.com 8STS251BPU31C3 User manual

StarTech.com

StarTech.com SLSODDU33B User manual

StarTech.com

StarTech.com 4POSTRACK36 User manual

StarTech.com

StarTech.com S351BMU33ETG User manual

StarTech.com

StarTech.com SAT2520U2ER User manual

StarTech.com

StarTech.com SAT35401U System manual

StarTech.com

StarTech.com DRW115ATABK Manual

StarTech.com

StarTech.com SMS1BMU313 User manual

StarTech.com

StarTech.com InfoSafe S252U2ERR User manual

StarTech.com

StarTech.com SAT3520U3R User manual

StarTech.com

StarTech.com RK12WALHM User manual

StarTech.com

StarTech.com RK2536BKF User manual

StarTech.com

StarTech.com S251BU31REM User manual

StarTech.com

StarTech.com INFOSAFE SAT2510U2 User manual

Popular Enclosure manuals by other brands

SilentiumPC

SilentiumPC Armis AR5 Hardware installation

Pulsar

Pulsar 17/TRP80/DSPR Assembly instructions

Thermaltake

Thermaltake V150 TG user manual

MSI

MSI MPG SEKIRA 500X quick start guide

Antec

Antec Dark fleet DF-10 user manual

Nexans

Nexans WTC05 installation manual

Peavey

Peavey DS 1502 Specifications

D-Link

D-Link ShareCenter Pro DNS-1550-04 user manual

Rosewill

Rosewill RX82-U(JBOD) user manual

QNAP

QNAP SAS JBOD CLI 1.0 user guide

GAMDIAS

GAMDIAS Talos P1 Quick installation guide

Auvs

Auvs KR615 user manual

Digitus

Digitus DA-71114 manual

CommScope

CommScope FDH 3000 user manual

FS FHD-FWME4 quick start guide

JBL

JBL CS1215T owner's manual

Pulsar

Pulsar ARAD-S4 manual

Pulsar

Pulsar AWO454 Assembly instruction