StarTech.com S32M2NGFFPEX User manual

Manual Revision: 11/03/2014

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

S32M2NGFFPEX

SATA to M.2 NGFF SSD Adapter with

Expansion Slot Mounting

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s

authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction............................................................................................1

System Requirements.............................................................................................................................. 1

What’s in the Box....................................................................................................................................... 1

Product Diagram ....................................................................................2

Front View .................................................................................................................................................... 2

Rear View...................................................................................................................................................... 2

M.2 NGFF SSD Installation ....................................................................3

System Installation Preparation ..........................................................7

System Installation ................................................................................10

Hard Drive Initialization........................................................................11

Technical Support ..................................................................................12

Warranty Information............................................................................12

Instruction Manual

Introduction

System Requirements

• M.2 NGFF SSD Drive

• Computer System with:

-Available Low prole or full prole Expansion slot (PCI or PCI Express)

-Available SATA port on the motherboard

-Available SATA Power connector on the power supply

What’s in the Box

• 1 x SATA to M.2 NGFF SSD Adapter

• 1 x Full prole bracket (pre-installed)

• 1 x Low prole bracket

• 2 x SSD Installation screws

• 2 x PCI slot standos

Instruction Manual

Product Diagram

Front View

1. Mounting Bracket (Full prole pictured)

Rear View

1. M.2 NGFF connector

2. SSD Mounting holes

3. SSD stando and installation screw

4. SATA Power Port

5. SATA Data Port

Instruction Manual

M.2 NGFF SSD Installation

WARNING:

SSD Drives and storage adapters require careful handling. If you are not careful

with your SSD Drive, lost data may result. Always handle your drive with caution. Be

sure that you are properly grounded by wearing an anti-static strap when handling

computer components or discharge yourself of any static electricity build-up by

touching a large grounded metal surface (such as the computer case) for several

seconds.

1. Determine if the SSD installation screw and stando requires relocating by

assessing your drive length. The board is labeled with the respective drive types for

length but if your drive type is unknown, place your SSD next to the M.2 (NGFF) SSD

connector, note which drive installation hole matches the height of your SSD. If the

screw and stando are already installed in the correct position please proceed to step 4.

Instruction Manual

2. (Only required if the drive installation screw and stando requires relocating)

Remove the nut holding the SSD stando in place on the reverse side using a small

5mm wrench/nut driver, or needle nosed players (not included).

3. (Only required if the drive installation screw and stando requires relocating)

Remove the SSD installation stando, and reseat it into the drive installation hole

that matches your SSD. Replace the nut on the reverse side and secure it into place

using a 5mm wrech/nut driver or small set of needle nosed plyers.

Instruction Manual

4. Using the included Phillips head screw driver. Remove the SSD screw located in the

front of the SSD installation stando.

5. Slide the M.2 connector on the SSD into the M.2 receprical connector on the

S32M2NGFFPEX.

Note: The connector on your M.2 SSD is keyed so the drive will only t one way.

Instruction Manual

6. Press the drive down toward the SSD stando, and drive the removed screw

through the mounting hole on your SSD drive and into the SSD stando using the

included Philips head screw driver.

7. The SSD has now been installed, and is ready for system installation.

Instruction Manual

System Installation Preparation

The S32M2NGFFPEX can be mounted in both low prole and full prole computer

systems. Select the bracket that corresponds with your type of computer system.

(See Bracket Installation)

The S32M2NGFFPEX can be installed in an available PCI slot, or a PCI Express slot. If you

intent to install the adapter into a PCI slot, the PCI standos must be used.

(See PCI Stando installation)

Bracket Installation

1. Remove the undesired bracket by unscrewing the bracket screws from the top of

the S32M2NGFFPEX board using a Phillips head screw driver (not included, included

screw driver is too small).

Table of contents

Other StarTech.com Computer Hardware manuals

StarTech.com

StarTech.com PEXSAT34RH User manual

StarTech.com

StarTech.com MPEX1394B3 User manual

StarTech.com

StarTech.com 8STUSBDUP12 User manual

StarTech.com

StarTech.com PEX2MPEX User manual

StarTech.com

StarTech.com CABSHELF22V User manual

StarTech.com

StarTech.com EC1394B2 User manual

StarTech.com

StarTech.com SATSASBAY3BK User manual

StarTech.com

StarTech.com PEX13943 User manual

StarTech.com

StarTech.com USBDUPE17 User manual

StarTech.com

StarTech.com PEXUSB400 User manual

StarTech.com

StarTech.com PEXESAT322I System manual

StarTech.com

StarTech.com EC230USB User manual

StarTech.com

StarTech.com SATABAY3 Manual

StarTech.com

StarTech.com PEX4S552B User manual

StarTech.com

StarTech.com SATDUP11 User manual

StarTech.com

StarTech.com 8STHSB220SAT25B User manual

StarTech.com

StarTech.com PCISOUND5CH User manual

StarTech.com

StarTech.com USBPS2PLATE User manual

StarTech.com

StarTech.com ST20000SPEXI User manual

StarTech.com

StarTech.com HSB1SATSASBA User manual

StarTech.com

StarTech.com PEX1RISERF User manual

StarTech.com

StarTech.com 4K30-HDMI-CAPTURE User manual

StarTech.com

StarTech.com PEXSAT32 User manual

StarTech.com

StarTech.com PEX10000SFPI User manual

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual