STANLine BOX 4G User manual
USER MANUAL / MANUEL UTILISATEUR / MANUALE UTENTE / MANUAL DEL USUARIO
/ MANUAL DO USUÁRIO / BENUTZERHANDBUCH / GEBRUIKERSHANDLEIDING
ENGLISH 03
FRENCH 14
ITALIAN 25
SPANISH 36
PORTUGUESE 47
GERMAN 58
DUTCH 69
3
EN
Contents
TECHNICAL FEATURES 4
PACK 4
PACK CONTENTS 4
DESCRIPTION OF THE TERMINAL 5
•View of the interface with covers in position 5
•View of the interface with covers removed 5
PREREQUISITES 5
•Required SIM configuration 5
GETTING STARTED 6
• Step 1: installing the pads 6
• Step 2: choosing the space on the roof 6
• Step 3: applying the sealant 6
• Step 4: sticking the Box on top of the vehicle 7
• Step 5: assembling the cable gland 7
• Step 6: installing the power cable 7
• Step 7: preparing the power cable 8
• Step 8: connecting the Faston connectors 8
• Step 9: installing the left cover 8
• Step 10: inserting a SIM card 9
• Step 11: installing the right cover 9
• Step 12: powering the device 9
SET UP 10
• App Android/iOS 10
• Configuration Access 10
• 4G/LTE Setup 11
• External Wi-Fi Setup 11
• Box 4G Wi-Fi Setup 12
• General 12
TROUBLESHOOTING AND FAQ 13
APPENDIX 13
CONTACTING TECHNICAL SUPPORT 13
4
EN
Technical features
TRANSMITTER - RECEIVER
Frequency bands
•LTE with MIMO diversity:
Band 1 (2100 MHz)
Band 3 (1800 MHz)
Band 7 (2600 MHz)
Band 8 (900 MHz)
Band 20 (800 DD)
Band 28 (700d)
•UMTS (WCDMA), HSDPA, HSUPA,
HSPA+, DC-HSPA+ with diversity:
Band 1 (2100 MHz)
Band 8 (900 MHz)
Antenna gain 2 dBi (± 1dB)
System weight 2.5 Kg
System dimensions 500 mm L x 400 mm W x 170 mm H
Type of SIM Mini SIM (Micro and Nano SIM accepted with a Mini SIM adapter)
POWER SUPPLY CHARACTERISTICS
Power supply 9 to 30V DC (connectors + cable provided)
Operation < 10 W
AMBIENT CONDITIONS
Operating temperature -20°C to +50°C
Storage temperature -40°C to +85°C
INTERFACES
Data transmission Wi-Fi
Setup / Configuration Via Application
INSTALLATION
Mounting With 4 pads (provided)
Pack
Pack contents
Ensure that you have the following items ready before
installing your terminal:
If any of these items is incorrect, missing or damaged,
please contact STANLine or your retailer.
Please retain the packaging for future use, should you need
to return the product for repair.
Accessories other than those provided may not be
compatible with your terminal.
TO BE PREPARED PROVIDED
•Sealant Teroson MS 930 •1 Box 4G
•Screwdriver PZ1
(if not, any cross-headed) •4 Pads
•Open-end wrench 15/17 mm •2 Covers
•Hex key no3 •1 Cable gland
•Wire stripper •8 x M3 screws; 12 x M4 screws
•Crimping tool •1 x 8 m power cable
•Fuse (<=12A) •2 Faston connectors
5
EN
Description of the terminal
For best performance, the system must be placed
horizontally above the recreational vehicle. Please follow
the installation steps below.
Power supply
terminal block
Sim card
slots
VIEW OF THE INTERFACE WITH COVERS REMOVED
Avoid any contact of thread lock or
Tef-Gel on the radome of the device.
Prerequisites
REQUIRED SIM CONFIGURATION
Depending on how your SIM card(s) are configured, you will need one or more configuration
settings to connect your terminal to the Internet:
•APN setting (Access Point Name).
•PIN code (Personal Identification Number).
Those informations should be provided with your SIM card. Please reach your service provider if not available.
6
EN
Getting started
Your terminal can be installed in 12 steps:
Installing the pads
4 pads are supplied with the Box 4G
to attach it to the roof of your vehicle.
Screw each of the 4 pads to the Box
using the 3 M4 inserts.
STEPS
1
2
3
Applying the sealant
Recommended sealant to stick the Box
on top of the vehicle: Teroson MS 930.
Apply the sealant evenly to the inner side
(ribbed) of the 4 pads.
Choosing the space on the roof
Pick a flat, bare space on the roof of the
RV. Avoid placing the system near the
metal parts.
7
EN
STEPS
Sticking the Box on top
of the vehicle
Follow the instructions for use of the
assembly product. Stick the Box on
top of the vehicle with the shaped side
towards the front of the vehicle. Keep
the Box in place for 30 min. Wait at least
2 hours before driving.
2H
30 mn
4
5
6
Installing the power cable
Pass the supplied power cable through
the cable gland.
Assembling the cable gland
Attach the cable gland to the perforated
cover with the flat seal and nut supplied.
8
EN
Preparing the power cable
Remove the power cable insulation
(inside the cover, 1 cm +/- 2 mm) to
connect the Faston connectors.
Connecting the Faston connectors
Connect the Faston connectors to
the 2 pins in the left hole (no mounting
direction).
STEPS
7
8
9
Installing the left cover
Screw the cover (4 M3 screws and
washers) by adjusting the length of the
cable (inside the hole). Screw the cable
gland onto the cable.
9
EN
Inserting a SIM card
Insert 1 to 2 SIM cards into the slots in
the right hole.
Installing the right cover
Screw the hatch (4 M3 screws and
washers) fitted with a vent on the right
hole.
Powering the device
Connect the cable to the vehicle power supply (9 to 30 V DC). Requires fuse protection (<=12A).
STEPS
10
11
12
10
EN
Set up
➊App Android/iOS:
Set up the Box with the Android or iOS
"Box 4G STANLine" mobile app available on
Playstore or Apple store. The app can also
be downloaded from the Stanline website
http://stanline.fr/en/box-4g/35-box-4g.html.
The app opens on the home screen,
and the following screen appears:
The screen consists of:
• a top line showing:
- an on/off power button: it enables/ disables
the Box 4G’s LTE/Wi-Fi connections,
- configuration connection status,
- the external connection status
(external LTE or Wi-Fi),
• 5 panels described below to set up the Box.
➋ Configuration Access:
Use the configuration access screen to:
• enter the Box 4G’s configuration access code.
- This code will allow the smartphone/tablet to
pair with your Box 4G to complete the setup.
- This step is essential. If your smartphone/
tablet is not paired with your Box 4G, you will
not be able to set it up.
- This code is available on the back of
the installation notice. It is important that
you keep this code.
Once the code is entered and confirmed, the
connection (key) icon at top changes to green.
Before launching the app, make sure that
Wi-Fi and Bluetooth on your smartphone/tablet
is turned on.
Table of contents
Languages:
