Stanley LD100 User manual
Please read these instructions before operating the product
LD100
Line Laser Detector
77-023
GB
D
F
I
E
PT
NL
DK
SE
FIN
NO
PL
GR
CZ
RU
HU
SK
SI
BG
RO
EE
LV
TR
LT
HR
277-023
Carefully read the Safety Instructions and User Manual before using this product. The person
responsible for the instrument must ensure that all users understand and adhere to these
instructions.
Retain this manual for future reference.
NOTE: This product does not contain a laser. When working with lasers, obey the safety
instructions that follow below.
DO NOT remove any warning label(s) on the housing. This instrument must only be used for
leveling and layout tasks as outlined in this manual.
ALWAYS make sure that any bystanders in the vicinity of use are made aware of the
dangers of looking directly into the laser tool.
1. Safety
2. Product Description
3. Specifications
4. Operating Instructions
5. Maintenance and Care
6. Warranty
User Safety
Safety
Contents
GB
D
F
I
E
PT
NL
DK
SE
FIN
NO
PL
GR
CZ
RU
HU
SK
SI
BG
RO
EE
LV
GB
D
F
I
E
PT
NL
DK
SE
FIN
NO
PL
GR
CZ
RU
HU
SK
SI
BG
RO
EE
LV
TR
GB
D
F
I
E
PT
NL
DK
SE
FIN
NO
PL
GR
CZ
RU
HU
SK
SI
BG
RO
EE
LV
GB ENGLISH
GERMAN
FRENCH
ITALIAN
SPANISH
PORTUGUESE
DUTCH
DANISH
SWEDISH
FINNISH
NORWEGIAN
POLISH
GREEK
CZECH
RUSSIAN
HUNGARIAN
SLOVAKIAN
SLOVENIAN
BULGARIAN
ROMANIAN
ESTONIAN
LATVIAN
LITHUANIAN
TURKISH
CROATIAN
D
F
I
E
PT
NL
DK
SE
FIN
NO
PL
GR
CZ
RU
HU
SK
SI
BG
RO
EE
LV
LT LT LT LT
TR TR TR
HR HR HR HR
3
77-023
DO NOT use in combination with other optical instruments. Do not modify the instrument, or
make manipulations or use in other applications than those described in the manual.
DO NOT look into the beam with optical aids, such as magnifiers, binoculars or Telescopes.
DO NOT stare into the laser beam or direct it towards other persons. Make sure the
instrument is not set at eye level. Eye protection is normally afforded by natural aversion
responses such as the blink reflex.
DO NOT direct the laser beam at other persons.
ALWAYS turn the laser tool “OFF” when not in use. Leaving the laser tool “ON” increases
the risk of someone inadvertently staring into the laser beam.
DO NOT operate the laser tool in combustible areas such as in the presence of flammable
liquids, gases or dust.
DO NOT disassemble the laser tool. There are no user serviceable parts inside.
Disassembling the laser will void all warranties on the product. Do not modify the product in
any way. Modifying the laser tool may result in hazardous laser radiation exposure.
DO NOT use this instrument in areas where a risk of explosion is present.
NOTE: Since the laser beam is of the focused type, ensure you check the beam’s path over
a relatively long distance and take all necessary precautions to ensure the beam cannot
interfere with other persons.
477-023
WARNING: Batteries can explode or leak and can cause injury or fire. To reduce this risk:
ALWAYS follow all instructions and warnings on the battery label and package.
DO NOT short any battery terminals
DO NOT charge alkaline batteries.
DO NOT mix old and new batteries. Replace all of them at the same time with new batteries
of the same brand and type.
DO NOT mix battery chemistries.
DO NOT dispose of batteries in fire.
ALWAYS keep batteries out of reach of children.
ALWAYS remove batteries if the device will not be used for several months.
NOTE: Ensure that the correct batteries as recommended are used.
NOTE: Ensure the batteries are inserted in the correct manner, with the correct polarity.
DO NOT dispose of this product with household waste.
ALWAYS dispose of batteries per local code.
PLEASE RECYCLE in line with local provisions for the collection and disposal of electrical
and electronic waste under the WEEE Directive.
Battery Safety
End of Life
5
77-023
ROHS Compliant
The Stanley Works declares that the CE Mark has been applied to this
product in accordance with the CE Marking Directive 93/68/EEC.
For further details please refer to www.stanleyworks.com.
Declaration of Conformity
Product Description
Package Contents
1. Laser Detector with Detector Clamp
2. Battery (1 x 9V)
3. User Manual
677-023
Laser Detector
1. Alignment Pin for Laser Detector
2. Screw Mount for Laser Detector
3. Measurement Indicator
4. Quick Release
5. Clamp
1
2
5
4
3
Detector Clamp
Product Overview
1. Vertical Beam Bubble Level
2. Keyboard
3. Horizontal Beam Bubble Level
4. Datum Line (Front)
5. Laser Reception Window
6. Speaker
7. Location for Lanyard
4
3
6
2
1
5
9
8
11
10 8. Datum Line (Back)
9. Thread Mount for Detector Clamp
10. Alignment Hole for Detector Clamp
11. Battery Compartment Cover
7
7
77-023
Specifications
Leveling Accuracy:
Laser Reception Window Width:
Operating Time:
Auto Power Off (with No Signal Detected):
Power Voltage:
Power Supply:
IP Rating:
Operating Temperature Range:
Storage Temperature Range:
Weight (without Batteries):
Size:
≤ 1 mm (≤ 1/32 in)
20 mm (3/4 in)
15 h
10 min
9 V
1 x 9V Battery (Alkaline)
IP54
-10° C to +40° C (+14° F to +104° F)
-20° C to +60° C (-4° F to +140° F)
155 g (5,5 oz)
140 mm × 68 mm × 25 mm (5 1/2 in × 2 5/8 in × 1 in)
877-023
Operating Instructions
1. Turn laser detector to back. Open battery
compartment cover by pressing and sliding
out.
2. Install / Remove batteries. Orient batteries
correctly when placing into laser detector.
3. Close and lock battery compartment cover
by sliding in until securely closed.
+-
Battery Installation / Removal
9
77-023
Function
Laser Detector with Detector Clamp
1. Press power key to power ON / OFF. Replace
battery when low battery LED lights red.
Power ON / OFF
Low Battery LED
Volume
2. Press volume key 1x for low volume, 2x to
mute, 3x for high volume.
3. Orient detector for the appropriate beam
type. Laser unit must be in pulse mode. Use
the bubble levels to keep detector level.
Bubble Level
Vertical Beam
Horizontal Beam
4. Directional LEDs light red to indicate
direction detector must move to be in-line
with laser beam.
Move Detector
in Indicated
Direction
Laser
Detection
Window
5. LED lights blue to indicate detector is in-line
with laser beam.
In-Line
1. Fit pin into algnment hole. Tighten mounting
screw. Clamp onto pole.
10 77-023
Laser detector is not waterproof. DO NOT allow to get wet. Damage to internal circuits may
result.
DO NOT leave laser detector in direct sunlight or expose it to high temperatures. The
housing and some internal parts are made of plastic and may become deformed at high
temperatures.
DO NOT store the laser detector in a cold environment. Moisture may form on interior parts
when warming up. This moisture could fog up laser reception window and cause corrosion of
internal circuit boards.
When working in dusty locations, some dirt may collect on the laser reception window.
Remove any moisture or dirt with a soft, dry cloth.
DO NOT use aggressive cleaning agents or solvents.
Store the laser detector in its case or safe place when not in use. If storing for extended
time, remove batteries before storage to prevent possible damage to the instrument.
Maintenance and Care
Table of contents
Languages:
Other Stanley Security Sensor manuals
