Stanley PB-5 User manual

Please read these instructions before operating the product

PB-5

5 - Beam Self-Leveling Spot Laser

77-119

Self-Leveling

FIN

277-119

Carefully read the Safety Instructions and User Manual before using this product. The person

responsible for the instrument must ensure that all users understand and adhere to these

instructions.

Retain this manual for future reference.

IMPORTANT: The following labels are on your laser tool for your convenience and safety.

They indicate where the laser light is emitted by the level. ALWAYS BE AWARE of their

location when using the level.

User Safety

Safety

EN 60825-1

LASER RADIATION - DO NOT

STARE INTO BEAM OR VIEW

DIRECTLY WITH

OPTICAL INSTRUMENTS

CLASS 2 LASER PRODUCT

MAX OUTPUT ≤ 1 mW @ 630 - 670 nm

1. Safety

2. Product Description

3. Speciﬁcations

4. Operating Instructions

5. Calibration

6. Maintenance and Care

7. Warranty

Contents

FIN

GB ENGLISH

GERMAN

FRENCH

ITALIAN

SPANISH

PORTUGUESE

DUTCH

DANISH

SWEDISH

FINNISH

NORWEGIAN

POLISH

GREEK

CZECH

RUSSIAN

HUNGARIAN

SLOVAKIAN

SLOVENIAN

BULGARIAN

ROMANIAN

ESTONIAN

LATVIAN

LITHUANIAN

TURKISH

CROATIAN

FIN

LT LT LT LT

TR TR TR

HR HR HR HR

77-119

DO NOT remove any warning label(s) on the housing. This instrument must only be used for

leveling and layout tasks as outlined in this manual.

ALWAYS make sure that any bystanders in the vicinity of use are made aware of the

dangers of looking directly into the laser tool.

DO NOT use in combination with other optical instruments. Do not modify the instrument, or

make manipulations or use in other applications than those described in the manual.

DO NOT look into the beam with optical aids, such as magniﬁers, binoculars or Telescopes.

DO NOT stare into the laser beam or direct it towards other persons. Make sure the

instrument is not set at eye level. Eye protection is normally afforded by natural aversion

responses such as the blink reﬂex.

DO NOT direct the laser beam at other persons.

ALWAYS turn the laser tool “OFF” when not in use. Leaving the laser tool “ON” increases

the risk of someone inadvertently staring into the laser beam.

DO NOT operate the laser tool in combustible areas such as in the presence of ﬂammable

liquids, gases or dust.

DO NOT disassemble the laser tool. There are no user serviceable parts inside.

Disassembling the laser will void all warranties on the product. Do not modify the product in

any way. Modifying the laser tool may result in hazardous laser radiation exposure.

DO NOT use this instrument in areas where a risk of explosion is present.

NOTE: Since the laser beam is of the focused type, ensure you check the beam’s path over

a relatively long distance and take all necessary precautions to ensure the beam cannot

interfere with other persons.

477-119

WARNING: Batteries can explode or leak and can cause injury or ﬁre. To reduce this risk:

ALWAYS follow all instructions and warnings on the battery label and package.

DO NOT short any battery terminals

DO NOT charge alkaline batteries.

DO NOT mix old and new batteries. Replace all of them at the same time with new batteries

of the same brand and type.

DO NOT mix battery chemistries.

DO NOT dispose of batteries in ﬁre.

ALWAYS keep batteries out of reach of children.

ALWAYS remove batteries if the device will not be used for several months.

NOTE: Ensure that the correct batteries as recommended are used.

NOTE: Ensure the batteries are inserted in the correct manner, with the correct polarity.

DO NOT dispose of this product with household waste.

ALWAYS dispose of batteries per local code.

PLEASE RECYCLE in line with local provisions for the collection and disposal of electrical

and electronic waste under the WEEE Directive.

Battery Safety

End of Life

77-119

ROHS Compliant

EN 60825-1

The Stanley Works declares that the CE Mark has been applied to

this product in accordance with the CE Marking Directive 93/68/

EEC.

This product conforms with EN60825-1:2007.

For further details please refer to www.stanleyworks.com.

Declaration of Conformity

Product Description

Package Contents

1. Laser Unit

2. Multi-Functional Base

3. Strap (use with Base)

4. Laser Target

5. Carrying Case

6. Batteries (2 x AA)

7. User Manual

677-119

1. Window for Up Beam Laser

2. Keyboard

3. Window for Left Beam Laser

7. Window for Down Beam Laser

8. Laser Warning Label

9. 1/4 - 20 Threaded Mount

10. Battery Compartment Cover

910

Product Overview

Laser Unit

4. Window for Right Beam Laser

5. Window for Front Beam Laser

6. Main Power / Transport Lock

77-119

Multi-Functional Base

1. 1/4 - 20 Screw Mount

2. Key Hole Slot for Hanging

3. Strapping Slots

4. 5/8 - 11 Threaded Mount

5. 1/4 - 20 Threaded Mount

6. Fine Tune Adjustment Screws

7. Magnet Mount

877-119

Level Beam Accuracy:

Up Beam Accuracy:

Down Beam Accuracy:

Square Beam Accuracy:

Working range:

Working distance:

Laser Class:

Laser Wavelength:

Operating Time:

Power Voltage:

Power Supply:

IP Rating:

Operating Temperature Range:

Storage Temperature Range:

Weight (without Base and Batteries):

Size:

≤ 4 mm / 10 m (≤ 5/32 in / 30 ft)

≤ 6 mm / 10 m (≤ 1/4 in / 30 ft)

≤ 4.5 mm / 10 m (≤ 3/16 in / 30 ft)

Self-Leveling to ± 4°

≤ 30 m (≤ 100 ft)

Class 2

635 nm ± 5 nm

20 h

3 V

2 x AA Batteries (Alkaline)

IP54

-10° C to +40° C (+14° F to +104° F)

-20° C to +60° C (-4° F to +140° F)

430 g (15.1 oz)

105 mm × 50 mm × 120 mm (4 1/8 in × 2 in × 4 3/4 in)

Speciﬁcations

77-119

Operating Instructions

1. Turn laser unit over. Open battery

compartment cover by pressing, sliding

out. and ﬂipping open.

Battery Installation / Removal

2. Install / Remove batteries. Orient batteries

correctly when placing into laser unit.

3. Close and lock battery compartment cover

by ﬂipping it down and sliding in until

securely closed.

10 77-119

Laser Unit

2. Transport lock in unlocked position. Laser

power is ON. Left LED indicator lights green

when main power is on.

3. Press power key to power laser ON / OFF.

Right LED lights green when laser power is

on.

1. Transport lock in locked position. Laser

power is OFF.

4. Laser beam(s) blink along with right LED to

indicate the laser unit is out of the working

range. Reposition laser unit to be more

level.

Power OFF / Locked

Power ON / Unlocked

Laser ON / OFF

5. Low battery - Left LED blinks red to indicate

when battery power is low. Replace

batteries.

Other manuals for PB-5

This manual suits for next models

Table of contents

Languages:

Other Stanley Laser Level manuals

Stanley

Stanley CLLi User manual

Stanley

Stanley SPL3 User manual

Stanley

Stanley STHT77503-1 User manual

Stanley

Stanley STHT77512-1 User manual

Stanley

Stanley Fat Max S2 User manual

Stanley

Stanley CL2XTi User manual

Stanley

Stanley SP5 User manual

Stanley

Stanley SLL360 User manual

Stanley

Stanley SML User manual

Stanley

Stanley FatMax FMHT77598 User manual

Stanley

Stanley STHT77502-1 User manual

Stanley

Stanley MultiLine 1-77-122 User manual

Stanley

Stanley TLM30 User manual

Stanley

Stanley Fatmax Series User manual

Stanley

Stanley STHT77149 User manual

Stanley

Stanley STHT77504-1 User manual

Stanley

Stanley Fatmax FMHT77617 User manual

Stanley

Stanley RL HW User manual

Stanley

Stanley FATMAX FMHT1-77416 User manual

Stanley

Stanley SPL3 User manual

Stanley

Stanley FATMAX FMHT1-77356 User manual

Stanley

Stanley SLP3 User manual

Stanley

Stanley CROSS 90 User manual

Stanley

Stanley STHT77498-1 User manual

Popular Laser Level manuals by other brands

Nedo

Nedo ET-5 operating instructions

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP user manual

LaserLiner

LaserLiner X2-Laser manual

Spectra

Spectra LL300N manual

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP user manual

Nedo

Nedo Crossliner 4 operating instructions

Lasertec

Lasertec FX360G instruction manual

Flex

Flex ALC 8 Original operating instructions

Black & Decker

Black & Decker LZR5 user manual

Johnson

Johnson 40-6692 instruction manual

Cocraft

Cocraft HL 20-SG Original instructions

Zircon

Zircon iLine instructions

HWH

HWH 310 SERIES Operator's manual

Leica

Leica iCON robot 60 user manual

LaserLiner

LaserLiner SuperCross-Laser SCL 2 operating instructions

LaserLiner

LaserLiner ActiveFinder XP user manual

DeWalt

DeWalt DW082 Original instructions

imex

imex EL20 manual