More information on our website:http://www. mercura.eu
Head-Office: Zone d’Activités « Les Gailletrous » - rue Louis Pasteur- 41260 LA CHAUSSEE SAINT VICTOR
Tel: 02 54 57 52 52 –Fax 02 54 56 80 00
SAS with capital 102. 400 € - APE (NAF) 2790 Z –SIRET 310 999 891 00040
Once the PSU has been mounted, connect the connector to the cigarette lighter plug.
4. OPERATING WITH CIGARETTE LIGHTER PLUG CONNECTOR
* The Night siren mode is not kept in memory when the siren is turned off.
** Another short push on the ON/OFF button: deactivation of the GYROLED function turns off the
siren.
5. PSU INSTALLATION FOR ISO 3 POINT MOUNTING VERSION
Install the chosen control system (traditional control with fuse and button or electronic
control system)
Identify the chosen position for the PSU. The surface must be clean, dry and flat and the
loudspeaker must be directed towards the front of the vehicle.
Place the PSU and mark the position of the 3 holes.
Mark the cable entry position which must be situated in the middle of the 3 holes.
Assess the cable entry to the control system.
Drill all the holes and pass the cable through.
Place the PSU.
Insert the screws, ensuring that everything is water tight
Connect the power cable to the control system.
6. WIRED PSU ISO 3 POINT MOUNTING VERSION
* Buttons and fuses not supplied
The GYROLED® button is used to control the GYROLED and to power the entire PSU.
Pressing shortly the siren ON / OFF button actives the siren if Gyroled® is on.
Pressing longer the siren ON / OFF button selects the siren tone.
PSU MONO-TONE
Press the button shortly: Activates
the siren if Gyroled® is on**
Press the button longer: Night Siren
Mode*
PSU MULTI-TONE
Press the button shortly: Activates
the siren if Gyroled® is on**
Press the button longer : Siren tone
selection
RED BUTTON:
Gyroled® Function
& PSU power supply
GROUND
