Stahlwerk SW500 User manual

Read me first

Congratulations with the purchase of your Stahlwerk SW

500 floor

sweeper. We at Stahlwerk Germany always offer you the very best quality

available to assure safe and successful use. However we urge you to read

this manual with great care before use.

FLOOR SWEEPER

SW500

INSTRUCTION ....................................................................................................................2

PRESERVATION OF MANUAL....................................................................................2

CONFIRMATION INFORMATION................................................................................2

ATTENTION..................................................................................................................2

OTHER REFERENCE MANUAL..................................................................................2

SPARE PARTS AND MAINTENANCE .........................................................................3

AMENDMENT AND IMPROVEMENT..........................................................................3

SAFTY..................................................................................................................................3

CONTENT AND PURPOSE .........................................................................................3

SYMBOLS ....................................................................................................................3

SAFETY REQUIREMENTS FOR BATTERIES............................................................5

GENERAL SAFETY REGULATIONS...........................................................................6

MACHINE DESCRIPTION...................................................................................................6

OUTER PACKING OF MACHINE ................................................................................6

PERFORMANCE..........................................................................................................7

CONTROL PANEL........................................................................................................7

OPERATION.................................................................................................................8

MACHINE OPERATION PRECAUTIONS....................................................................9

MACHINE PRESERVATION AND MAINTENANCE ..................................................10

MAIN BRUSH HEIGHT INSPECTION AND ADJUSTMENT .....................................10

MAIN BRUSH REPLACEMENT............................................................................... 111

SIDE BRUSH HEIGHT ADJUSTMENT......................................................................12

SIDE BRUSH REPLACEMENT .................................................................................12

VIBRATION.................................................................................................................13

FILTER CLEANING AND INSPECTION ....................................................................13

BATTERY CHARGING...............................................................................................14

EMPTY THE DUSTBIN ..............................................................................................14

WATER INJECTION...................................................................................................15

SQUEEGEE INSPECTION AND ADJUSTMENT ...................................................... 15

MAINTENANCE.................................................................................................................16

USE CONDITIONS.....................................................................................................16

MAINTENANCE SCHEDULE.....................................................................................16

TOUBLESHOOTING ..................................................................................................17

SPECIFICATIONS......................................................................................................18

INSTRUCTION

The manual will provide necessary information for customers to use machines

safely, conveniently and correctly, including technical characteristics, operation

methods, machine storage, maintenance, spare parts and safety conditions.

Before using the machine, users and professional maintenance technicians

must read the manual carefully and use the machine strictly according to the

instructions in the manual. If you have any questions or get more details, please

consult the seller. The manual is specially provided for users and professional

maintenance/maintenance technicians. Operators must undergo professional

technical training, otherwise the manufacturer will not be responsible for the

loss.

PRESERVATION OF MANUAL

The manual must be placed in a safe and accessible area near the machine,

away from easily damaged areas such as liquids.

CONFIRMATION INFORMATION

The machine model and the year of manufacture are displayed on the

nameplate behind the machine.

Machine Model: SW500

Machine Number:

ATTENTION

This machine is suitable for industrial and commercial purposes, specially used

for cleaning hard floor in the room, and can not be used for other purposes.

Please use all recommended cleaning mats and brushes, as well as floor

cleaners for sale.

OTHER REFERENCE MANUAL

List of spare parts

SPARE PARTS AND MAINTENANCE

All necessary operations, maintenance and repair procedures must be

completed by trained operators or after-sales service centers. When

purchasing spare parts or requiring repairs with sellers, please inform the

machine model and fuselage number in detail.

AMENDMENT AND IMPROVEMENT

Our company often improves our products and keeps room for expansion, but

we are not obliged to make new improvements to the products already sold. If

there is any change in the content, please contact our after-sales service

department.

SAFTY

CONTENT AND PURPOSE

The following symbols indicate potential dangers. Read these instructions

carefully and take necessary precautions. The essence of the machine

operation manual is to prevent injury. Accident-free safety precautions are

necessary. Most accidents occur at work without paying attention to basic

safety rules. A careful and cautious user is the best guarantee against accidents,

even better than some other preventive measures. When using the machine,

we must pay attention to the people around you, especially the children.

SYMBOLS

DANGER!

This sign refers to a situation that is dangerous to the operator.

WARNING!

This sign refers to potential harm to people.

CAREFUL!

This sign refers to careful or important related notes or useful functions.

NOTE!

Please pay special attention to the above signs in the paragraph!

DANGER!

Detailed warnings and messages on the prevention of personnel and

machine damage hazards are as follows:

Please keep loose clothing, hair, fingers and other parts of the body away

from the air vent and any moving parts of the machine.

When the machine stops, remember to turn off the power.

Do not use the machine where the slope exceeds the rated value of the

machine.

Please read the maintenance and repair instructions carefully before

performing any maintenance and repair operations.

Please dont smoke while the battery is charging.

Do not use the machine in a very dirty area. If the road waste is thick, please

repeat the sweeping twice or more.

When using the machine, be careful not to cause injury to people, especially

children.

Do not place liquid containers on the machine.

The machine should be stored between - 10 and 40 degrees.

When using the machine, the temperature should be between - 10 ° C and

40 ° C.

Humidity should be between 30% and 95%.

Do not use the machine as a means of transport.

When the machine is not moving forward, do not let the brush continue to

rotate to avoid damage to the ground.

In case of fire, please remember to use powder fire extinguisher instead of

water.

Dont hit the shelves where there is a danger of falling objects.

Adjust the travel speed of the machine according to the adhesion of the

ground.

Do not change the safety guards of the machine; follow the maintenance

instructions procedure.

Do not move or change the Stahlwerk nameplate on the machine.

When the machine operation fails, make sure that the failure is not caused by

the lack of scheduled maintenance, and turn to Stahlwerk for help.

If some parts need to be replaced, you can purchase spare parts from the

original manufacturer or authorized dealer.

To ensure the proper operation and safety conditions of the machine,

professionals or service centers must follow the maintenance section of this

manual work.

Even if the machine is to be disassembled and scrapped, people should pay

attention to it as some harmful substances (such as batteries, waste oil, etc.)

shall be sent to a specific Center for treatment.

Machines equipped with lead (wet) batteries shall not be tilted more than 30 °

above the horizontal ground, so that the battery is highly corrosive acid will

leak. The machine must be tilted during maintenance. Please remove the

battery.

SAFETY REQUIREMENTS FOR BATTERIES

It is necessary to avoid the battery in low voltage state and charge it as soon

as possible.

The battery is 12V lead-acid maintenance-free battery.

To avoid leakage, keep the battery dry and clean, especially remove

pollutants such as metal dust.

It is forbidden to place metal parts (such as tools) on batteries in order to

prevent short circuit burnout of batteries.

When reclaiming batteries, please comply with local regulations.

It is forbidden to use open fire when handling and handling batteries.

The charging room should be well ventilated.

When the key switch is in the ON position, it is forbidden to connect or

disassemble batteries.

Before disassembling and assembling batteries, first disconnect the negative

(-) battery wire, and then disconnect the positive (+) battery wire. When re-

wiring, we must pay attention to the polarity of batteries, wrong wiring will

damage electrical components;

Avoid direct contact between positive and negative electrodes, because it will

cause high current short circuit, high heat and even the possibility of fire.

When the battery is charged, it generates explosive hydrogen, charges the

battery in a ventilated place, and keeps the lid open and away from the open

fire.

GENERAL SAFETY REGULATIONS

In addition to the provisions made in this specification, the required general

safety regulations and accident prevention guidelines must also be complied

with. Even if you have used a similar car before, please read the instructions

carefully. Reading the instructions in advance will save you a lot of time in the

future. Before you start using it, its vital for you to be familiar with all the

accessories and controls and their functions. Read the manual thoroughly so

that you dont get in a h urry when you turn it on.

MACHINE DESCRIPTION

OUTER PACKING OF MACHINE

When the machine arrives, please carefully check whether the machine itself

is damaged or not. If the damage is obvious, please keep the outer packing

carton so as to make the damage declaration to the freight company

immediately.

Please check whether the machine contains the following items:

Handbook for the Use of Sweeper

List of spare parts for floor sweeper

Floor sweeper spare parts

Start-up key

PERFORMANCE

The sweeper must be operated by qualified operator on flat concrete or

asphalt floor to sweep dust or light garbage.

CONTROL PANEL(Figure 1 and 2)

1. Key switch

2. Water pump

3. Main brush button

4. Side brush button

5. Electric and voltage display

6. Water injection figure 1

7. Main brush protection

8. Side Brush protection

9. Main brush height adjuster

10. Side Brush height adjuster

11. Charging port

12. Dustbin handle

13. Armrest adjuster

14. Vibrating pedal figure 2

OPERATION

EVERY START

Insert the start key in the operation panel; turn the key switch to the "on"

position.

Three seconds later, the meter displays the battery power value. If it is fully

charged, it will display 100%; if it is under charged, it will display 20%, please

charge; otherwise, it will display the battery memorized during the last

shutdown.

CAREFUL!

Make sure that the dust bin is closed properly when the machine is in

normal operation.

If the machine is transported, check that all parts are moved during

transportation.

MACHINE START

Turn the start key to the "on" position.

Move the machine to the working area by pushing the push rod forward,

backward and turning.

Press the main brush function button and side brush function button to I to start

sweeping.

If the working environment is poor, stop sweeping after a certain time interval

(pull the vibrating handle).

Check the amount of garbage in the dustbin and empty it in time.

Check the water quantity and add water in time.

MACHINE STOP

Press the main brush and side brush function buttons to O.

Turn the start key to the "off" position.

MACHINE OPERATION PRECAUTIONS

NOTE!

In the process of work, determine whether to start the vibration device

temporarily according to the amount of garbage on the cleaned ground.

When the filter is blocked or the bin is full, the machine cant collect

the garbage. After each work, the dustbin must be emptied. (if the

dustbin is full in the work, please empty it immediately.) if the

temperature is lower than 0 ℃, please pay attention to drain the water

in the dustbin to prevent freezing!

WARNING!

Avoid stopping the machine at the same place for a long time and

rolling the brush; this will leave traces on the ground

When collecting large garbage, please remember to lift the front wheel

slightly and move forward. Note that it is only lifted for a short time.

In order to make the machine have a good cleaning, be sure to clean

the filter. Step the vibration on the side of the bin for about ten times

to shake off the dust on the filter.

CAREFUL!

Decide whether to clean the filter according to the dirt of the cleaned

area.

The dustbin must be emptied every time after working. When the main

brush and the side brush are worn, the screw at the rear of the

machine can be adjusted to lower the main brush and the side brush,

and the adjustment cannot be too low. Clean them to avoid burning

the fuse. (during the first cleaning, there is no need to adjust, and the

companys staff has adjusted it)

Table of contents

Popular Blower manuals by other brands

Weed Eater

Weed Eater VS2000BV instruction manual

KRAUSMANN

KRAUSMANN U37020-00 Operation manual

Bosch

Bosch ALB 36 LI Original instructions

Cub Cadet

Cub Cadet HB425 Operator's manual

GreenWorks Pro

GreenWorks Pro BLB482 Operator's manual

ARIETE

ARIETE 2768 manual

NuTone

NuTone 331H user guide

GÜDE

GÜDE GLB 200 18 Li-Ion Translation of the original instructions

I.VA.CO.

I.VA.CO. SC Series Operating and maintenance manual

DeWalt

DeWalt DCE100 instruction manual

Becker

Becker SV 7.330 operating instructions

Metabo

Metabo AG 18 Pro instructions

Desa

Desa GA3650TB installation instructions

Echo

Echo Power Blower PB-230LN Operator's manual

Echo

Echo PB-413H Operator's manual

Black & Decker

Black & Decker BV3100 instruction manual

Ryobi

Ryobi RY08570 Operator's manual

Haaga

Haaga 355 user manual