Ss Brewtech Jacketed Unitank User manual
ENGINEERING BETTER BEER
Jacketed Unitank
Page 2
IN THE CRATE
JACKETED UNITANK
(1) 8” or 12” TC Lid Cap w/ 3”
Combination Dry-hop, PRV, and CIP
Port (Spray Ball sold separately)
(1) 8” or 12” TC Lid Clamp (1) 8” or 12” Lid Gasket
(1) 3” TC Pressure
Release Valve (PRV)
(1) 1.5” TC Blow-Off Arm
(1) 1.5” TC Pro Sanitary
Pressure Gauge
(1) 1.5” TC Analog
Temperature Gauge
(1) DIN Nut Rotatable Racking
Arm w/ 1.5” TC Port
(1) 3” TC Clamp
(10) 1.5” TC Clamp
(1) 3” TC Gasket
(10) 1.5” TC Gasket (3) 1.5” TC Buttery Valves
(1) Stainless Lower Shelf
(1) 1.5” TC Perlick Style
Sampling Valve
(1) 1.5” TC Carbstone
w/ 3/8” Ball-Valve
(1) 1.5” TC PT100 Thermoprobe
(4) Threaded Stem
Adjustable Feet
*NOTE: Certain features come preinstalled on the vessel for shipping purposes, some assembly is required.
TANK FEATURES & ASSEMBLY
TC LID CAP W/ COMBINED 3” DRY HOP/
PRV/CIP PORT
1.5” TC PRESSURE GAUGE
A - 3” TC Pressure Release Valve (PRV)
G - 1.5” TC Pro Sanitary Pressure Gauge
B - 3” TC Gasket
H - 1.5” TC Gasket
C - 3” TC Clamp
I - 1.5” TC Clamp
D - 8” or 12” TC Lid
E - 8” or 12” TC Lid Gasket
F - 8” or 12” TC Lid Clamp
A
G
B
H
C
I
D
E
F
Page 3
TANK FEATURES & ASSEMBLY
J - 1.5” TC Blow-Off Arm
H - 1.5” TC Gasket
I - 1.5” TC Clamp
K - Clamp
L - Buttery Valve
J
HI
K
K
H
I
L
Page 4
1.5” TC BLOW-OFF ARM W/ BUTTERFLY VALVE
TANK FEATURES & ASSEMBLY
1.5” TC CARBONATION STONE
WITH 3/8” BALL-VALVE
1.5” TC ANALOG TEMPERATURE GAUGE
M - 1.5” TC Carbstone w/ 3/8” Ball-Valve
M - 1.5” TC Analog Temperature Gauge
H - 1.5” TC Gasket
H - 1.5” TC Gasket
I - 1.5” TC Clamp
I - 1.5” TC Clamp
M
M
H
H
I
I
Page 5
TANK FEATURES & ASSEMBLY
1.5” TC PERLICK SAMPLE VALVE
1.5” TC THERMOPROBE
N - 1.5” TC Perlick Style Sampling Valve
O - 1.5” TC Thermowell / Probe
H - 1.5” TC Gasket
H - 1.5” TC Gasket
I - 1.5” TC Clamp
I - 1.5” TC Clamp
N
O
H
H
I
I
Page 6
TANK FEATURES & ASSEMBLY
ROTATABLE RACKING ARM
1.5” TC BUTTERFLY DUMP VALVE
L - 1.5” TC Buttery Valve
L - 1.5” TC Buttery Valve
H - 1.5” TC Gasket
H - 1.5” TC Gasket
I - 1.5” TC Clamp
P - DIN Nut Rotatable Racking Arm w/ 1.5” TC Port
I - 1.5” TC Clamp
Q - Elbow
L
L
H
H
I
I
Q
H
I
P
Page 7
TANK FEATURES & ASSEMBLY
STAINLESS STEEL SHELF & FEET
R - Stainless Steel Shelf
S - Threaded Stem Adjustable Feet
R
S S
Page 8
TANK FEATURES & ASSEMBLY
1/2” NPT GLYCOL RETURN LINE PORT
1/2” NPT GLYCOL SUPPLY LINE PORT
T - 1/2” NPT Glycol Return Line Port
U - 1/2” NPT Glycol Supply Line Port
Page 9
T
U
PT 100 THERMOPROBE
Page 10
5. Loosen set screws marked 1 and 2 and feed one temperature sensor wire into one of the ports.
There is no polarity, so either wire can be used in either port (one wire per port). Tighten set screws to
secure wires in place.
6. Reinstall face plate into plug receptacle and plug back in to the PT100 Thermoprobe. Secure assembly
with screw.
1. Disconnect/unplug units from any power outlets.
2. Remove screw and unplug receptacle from the PT100 Thermoprobe.
3. Use the at head screwdriver slot to remove face of receptacle.
4. Feed temperature sensor wires through receptacle.
WIRING INSTRUCTIONS
1
2
MSD 3
3
10A
250V
22
3
1
1.5” TC PT100 Thermoprobe Plug Receptacle
Screw
Temperature Sensor
Wires
Use Ports 1 & 2 Temperature Sensor Wires
Screwdriver Insert Slot
Table of contents
Other Ss Brewtech Brewing System manuals
Ss Brewtech
Ss Brewtech Ssparge Arm User manual
Ss Brewtech
Ss Brewtech The Brew Bucket User manual
Ss Brewtech
Ss Brewtech BREWMASTER User manual
Ss Brewtech
Ss Brewtech E-Kettle 304 User manual
Ss Brewtech
Ss Brewtech Keg WaSsher User manual
Ss Brewtech
Ss Brewtech E-Kettle 304 User manual
Ss Brewtech
Ss Brewtech FTSs Pro User manual
Ss Brewtech
Ss Brewtech E-Kettle 304 User manual
