Square Scrub EBG-20/R User manual
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com
Square Scrub
EBG-Series Surface Preparation Machine
Owner’s Manual
Contents:
Please read all Installation, Operation, and Safety Instructions before using this machine. <Bold>
This product is For Industrial/Institutional/Commercial Use Only.
WARNING OF POTENTIAL INJURY!
MOVING PARTS! UNPLUG BEFORE SERVICING!
This product contains moving parts to reduce the risk of injury unplug before servicing.
General Safety
- This floor-finishing machine shall be grounded while in use to protect the operator from electric shock. The machine is
provided with a three-conductor cord and a three-contact grounding type attachment plug to fit the proper grounding
type receptacle. The green (or green and yellow) conductor in the cord is the grounding wire. Never connect this wire to
other than the grounding pin of the attachment plug.
- This machine is for use on a nominal 120-volt circuit and has a grounding plug that resembles the plug illustrated in the
assembly instructions of this manual. Make sure that the machine is connected to an outlet having the same
configuration as the plug. No adapter should be used with this machine.
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com
INTRODUCTION TO THE EBG-Series
Safety
Transport of Machine
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com
Operating Instructions
Troubleshooting Guide
Problem
Cause
Action
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com
EBG
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com
Square Scrub Limited Warranty
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com
This manual suits for next models
2
Table of contents
Other Square Scrub Floor Machine manuals
