3
BEFORE FIRST USE
Before using the appliance make sure the mains
cable is unplugged from the socket and heat
controller e is in the ‘0’ position.
• Cure the hot plates by turning the heat
controller e to the highest setting (position
5) for 5 minutes to burn off their protective
coating. Ensure the room is well ventilated.
Switch the appliance off and let it cool
completely before wiping any residues from the
hot plates .
OPERATING INSTRUCTIONS
• Place cookware on the hot plate then switch
the appliance on by turning the heat controller e
clockwise to desired position. The indicator light
wwill glow while the hot plate is heating up.
• Turn the heat controller eto the required position
(1-lowest temperature, 5-maximum temperature,
OFF-switched off), to achieve the desired
temperature. The indicator light wwill go off
when the set temperature is reached.
• When not in use, ensure that the heat controller e
is in the OFF position and disconnected from the
power outlet.
• Use cookware with flat, heavy base to ensure
good contact with the hot plates . Always
place the cookware centrally on the hot plates
and position the handles safely out of the way.
Oversized pots which cover both hot plates will
overheat the hob and reduce its working life.
CARE AND MAINTENANCE
• Switch the appliance off, unplug the mains
cable from the socket and let the hot plates
cool down completely.
• Mop up any spillage as soon as possible and do
not leave it to harden. Wipe all surfaces with a
damp cloth and a mild detergent.
• Do not use harsh or abrasive detergents or
scourers to avoid scratching the surface.
SPECIFICATIONS
Rated Voltage: 220-240V~
Frequency: 50Hz
Rated Power: 4011........ 1000W
4010 ..... 2500W (1000W + 1500W)
ELECTRICAL
The product must not be used without the fuse
cover fitted.
Should the power cable or the power plug
become damaged, arrange for these to be
replaced by Customer Service or a qualified
person before continuing to use the appliance.
The appliance is fitted with a 13A fuse (BS1362) in
a 13A plug (BS1363).
ENVIRONMENTAL
To reduce environmental and
health problems due to hazardous
substances in electrical and electronic
goods, appliances marked with the
symbol below must not be disposed of
with unsorted municipal waste. Please
repair, reuse or recycle appropriately.
SERVICE
The product is not user-serviceable. If it is not
working, read the instructions, check the plug
fuse and main fuse/circuit breaker. If it is still not
working, consult your retailer. If that does not solve
the problem ring Customer Service – they may be
able to offer technical advice.
Please have the Model Number to hand, as
they will not be able to help you without it. If you
are advised to return the product to us, pack it
carefully, include a note with your name, address,
day phone number, and description of the problem.
If under a guarantee, say where and when it was
purchased and include a valid VAT receipt. Send it
to SQ Professional Ltd.
GUARANTEE
The guarantee for this product is covered by
SQ Professional Limited. Any faults with this
product arising through a manufacturer defect will
be covered for 1 year from the date of purchase,
subject to a valid VAT receipt being presented.
This does not include faults or damage caused by
misuse of general wear and tear.
SQ Professional Ltd will not be held liable for
general wear and tear, or eventual damages to
persons, animals or objects caused by incorrect
installation or deriving from improper, erroneous or
unreasonable use.
Please contact customer services on 01992 716
070 or send an e-mail to info@sqprofessional.com,
Monday to Friday from 09:30 - 17:30.
This does not affect your statutory rights.
All images are for illustration purposes only. Actual products may vary.
