Spraying Systems 1550+ AutoJet User manual
Scan the QR code, or visit spray.com/autojetspraycontrol, to access
manuals, videos and additional resources on the AutoJet®1550+ control panel.
AUTOJET®1550+ SPRAY CONTROL PANEL
QUICK START GUIDE
All manuals and user guides at all-guides.com
2.
CONNECT ELECTRICAL
SPRAY NOZZLES
Connect electrical spray nozzle cable to “Main”
connection. For multiple nozzles, connect nozzles to a
junction block, and then connect the junction block cable
to “Main” connection. (Can connect up to 8 nozzles.)
1550+
SPRAY CONTROLLER
1.
POSITION OR MOUNT
THE PANEL
Position or mount the panel to a wall in a location that is
close to your nozzles.
Install wall anchors that are designed to support at
least 50 lbs. (90.7 kg) according to the anchor
manufacturer’s specifications.
The mounting holes are on 5-7/16" (138 mm) centers and
are made for 1/4" (6 mm) screws with 3/8" (10 mm) diameter
screw heads.
5.44" (138 mm)
8.00" (203.2 mm)
0.27"
(6.8 mm)
10.72"
(272 mm)
11.34"
(288.1 mm)
0.83" (21 mm) 4 Places
Junction Block
All manuals and user guides at all-guides.com
1550
+
SPRAY CONTROLLER
3. CONNECT TRIGGER
OR SENSOR
Connect cable to “Trig” connection that will be used
to start spray sequence. Available triggers are:
• Trigger cable (for use with customer-supplied
trigger signal)
• Sensor (type should be selected based
on customer’s application)
- Photo
- Prox
- Laser
- Thru-beam
• Handheld trigger
1550
+
SPRAY CONTROLLER
4.
DUALTRIGGER FAIL-SAFE
(IF APPLICABLE)
For fail-safe operation, or when dual trigger signals
will run the system, connect trigger interlock cable
to “T. int.” connection.
All manuals and user guides at all-guides.com
5.
REMOTE DUTY CYCLE
(IF APPLICABLE)
If using remote setpoint for Precision Spray Control (PSC),
connect input of a 4-20mA analog signal to “4-20mA”
connection to adjust the duty cycle remotely.
1550+
SPRAY CONTROLLER
1550+
SPRAY CONTROLLER
6.
POWER UP
THE PANEL
Plug into grounded (115-230 VAC) power source
and turn on power. HMI display will illuminate. To
set spray parameters and for HMI operation, please
refer to section 6 of the owner’s manual.
1550+ AutoJet
®
SPRAY CONTROLLER
1550+ AutoJet
®
SPRAY CONTROLLER
HMI Screen
North Avenue and Schmale Road, P.O. Box 7900, Wheaton, IL 60187-7901 USA
spray.com | 1.800.95.SPRAY | Intl. Tel: 1.630.665.5000
Experts in Spray Technology
©Spraying Systems Co. 2020
PN: ML001550CONQS
All manuals and user guides at all-guides.com
Other manuals for 1550+ AutoJet
1
Table of contents
Other Spraying Systems Control System manuals
Spraying Systems
Spraying Systems TeeJet TECHNOLOGIES BoomPilot User manual
Spraying Systems
Spraying Systems TeeJet Technologies 744E User manual
Spraying Systems
Spraying Systems TeeJet 844-E User manual
Spraying Systems
Spraying Systems TeeJet TECHNOLOGIES BoomPilot User manual
Spraying Systems
Spraying Systems TeeJet BOOMPILOT User manual
Spraying Systems
Spraying Systems TeeJet 845 User manual
Spraying Systems
Spraying Systems AutoJet SCS Series User manual
Spraying Systems
Spraying Systems TeeJet TECHNOLOGIES BoomPilot User manual
Spraying Systems
Spraying Systems TeeJet TECHNOLOGIES BoomPilot User manual
