DISPLAY FUNCTIONS
1.TIME:
(1) Display range: 0:00~99:59
(2) Setting range:0~99(minutes) (Enter the value directly by using the numeric keypad)
(3) Screen display BAR: Number of cells-10 cells (MAX=60 minutes, display full cells)
(4) When there’s no setting value, the default setting is counting upward (after 99:59 it returns to 0:00)
(5) When there’s setting value, the default setting is counting downward, to 0:00 the console pause, all
the operational values are saved.
2.SPEED:
(1) Display range :0.0~99.9(km/ml)
(2) Screen display BAR: Number of cells-10 cells (MAX=60KM displays full cells, each cell is 60/10=6KM)
(3) After signal input for 3~4 seconds it will display the value.
(4) No signal input for 4~6 seconds the value returns to 0.
3.RPM:
(1) Display range :0~999
(2) Screen display BAR: Number of cells-10 cells (MAX=120RPM displays full cells, each cell is
120/10=12RPM)
(3) After signal input for 3~4 seconds it will display the value.
(4) No signal input for 4~6 seconds the value returns to 0.
4.DISTANCE:
(1) Display range:0.0~60(km/ml)
(2) Setting range:0~99 (Enter the value directly by using the numeric keypad)
(3) Screen display BAR: Number of cells-10 cells (MAX=10.0KM displays full cells)
When there’s no setting, 10.0KM/10 cells=1.0KM/cell
When there’s setting, the setting value/10 cells.
(4) When there’s no setting value, the default setting is counting upward (99.9 turns 0.0)
(5) When there’s setting value, the default setting is counting downward, to 0:00 the console pause, all
the operational values are saved.
5.CALORIES:
(1) Display range:0~999
(2) Setting range:0~990 (Enter the value directly by using the numeric keypad)
(3) Screen display BAR: Number of cells-10 cells (MAX=150 CAL displays full cells)
When there’s no setting, 150 CAL/10 cells=15 CAL/cell
When there’s setting, the setting value/10 cells.
(4) When there’s no setting value, the default setting is counting upward(999 turns 0)
(5) When there’s setting value, the default setting is counting downward, to 0:00 the console pause, all
the operational values are saved.
6.PULSE:
(1) Display range:0~230
(2) Setting range:0~230 (Enter the value directly by using the numeric keypad)
(3) Screen display BAR: Number of cells-10 cells (MAX=120 displays full cells, each cell is
120/10=12/cell)
(4) Field display detection value when no value is set
(5) When there is a set value, the field displays the detected value. When the heartbeat value exceeds
the set value, the console will beep.
(6) The sound is 1 second 2 short beeps.
