Split-fire Super Shred 3 User manual
1
SUPER SHRED 3
Owner’s Manual
Thank You for Purchasing a Super Shred 3!
We appreciate having you as our customer and wish you
many years of safe and satisfactory operation.
SPLIT-FIRE SALES INC.
285633 Airport Road
Norwich, ON N0J 1P0
Canada
1-877-548-3473 / 519-468-3647
Like, Follow and Subscribe!
Please share a google review about your Split-Fire
experience
Table of Contents
1. Introduction 4
1.1 How to use your Owner’s Manual 4
1.2 Product Information 5
2. Safety 6
2.1 Safety Labels 7
2.2 Operation Safety 8
2.3 Storage Safety 9
2.4 CSA Certification ……………………………………………….10
3. Operating Instructions 11
3.1 Before Operation 11
3.2 Operation 13
3.3 Troubleshooting 15
4. Maintenance 17
4.1 General Maintenance 17
4.2 Breakers 19
4.3 Wear Parts 20
4.4 Electrical 21
4.5 Warranty 23
4.6 Technical Support Contact…………………………………….24
Super Shred 3
Introduction Owners Manual
4
1.1 How To Use Your Owner’s Manual
This owner’s manual is a very important part of your new machine and
should remain a permanent part of it. If the machine is sold, the operator’s
manual must go with it.
A copy of the owner’s manual must always be located in the safety canister
located on the back of the machine.
By reading the owner’s manual you will help yourself and others avoid
personal injury and/or damage to the machine. The information recorded
in this manual will help you use this machine safely and effectively.
Once you read the manual and know how to operate the machine safely
and correctly, others can read and be trained to operate the machine. The
machine that is used in this manual for illustration may differ slightly from
your model, but will be similar enough to help you understand the
instructions.
Throughout this manual, “Back” and “Front” terms will be used. On the
Super Shred 3 the “Back” refers to the power cord side. The “Front” refers
to the side with the main electronic control panel. The terms “Left Hand”
and “Right Hand” will also be used. These sides are determined when
standing in front of the machine and facing the front control panel on the
machine. Your machine has been tested and inspected to ensure proper
performance and safety prior to leaving the factory.
Super Shred 3
Owners Manual Introduction
5
1.2 Product Information
This product can be identified by the model sticker on the front of the
machine (Super Shred 3).
Main Specs:
Footprint: 36” X 36”
Capacity: 150 Liters
Shredder Size: 10”X12”
Shredder HP: 3 HP
Shredder RPM: 20 RPM
Shredder Rotor Thickness: 1/4"
Shredder Rotor Material: 4140
Shredder Spacer Material: 4140
Shredder Scraper Bar Material: 304 SS
Shredder Shaft Material: 304 SS
If you ever need to contact your dealer or the manufacturer for parts or
questions regarding the operation or servicing of the machine, it is
important to have the model number as well as all the necessary
identification numbers.
Date of Purchase:
______________________
Dealer Name:
______________________
Dealer Phone Number:
______________________
Frame Serial Number:
(Note: the serial number consists of the year/month of manufacture
followed prefixed the model unit number.)
_________________________________
Super Shred 3
Safety Owners Manual
6
2. Safety
Please carefully read and understand the warnings about safety
concerns relating to machine damage and important servicing
information. Please read all these messages to avoid personal injury
and machine damage. The three main messages will start with:
WARNING!!! which suggests, a strong chance of personal injury or
death to the operator or bystanders if procedures are ignored.
IMPORTANT: which suggests, a strong chance of potential damage
to the machine may occur if procedures are ignored.
NOTE: which suggests, helpful information for proper operation and
service
Super Shred 3
Owners Manual Safety
7
2.1 Safety Labels
The machine safety labels shown in the section below are very important.
They are placed in areas on the machine that draw the attention of the
operator to potential safety hazards on the machine. If at any time the
stickers are removed, or come off during operation, contact your dealer or
the manufacturer immediately for replacement decals.
The sticker graphic and explanation, details the potential safety hazards
associated with each decal. Special attention should be given to these
recommendations, they are outlined for your safety.
SS3-1
SS3-2
SS3-3
SS3-4
Super Shred 3
Safety Owners Manual
8
2.2 Operation Safety
Warning!
DO NOT override, disconnect or customize safety switches in any form.
This machine has been manufactured for safe operation with safety
switches in place.
This machine uses safety switches on all compartment doors. If for any
reason, switches wear out, break or become nonoperational, this machine
must be disconnected and locked out until the safety switch is fixed and
operational.
Important:
This machine must only be used with soft organic material. Soft organics
are products such as plant material, soft stems, fruit, meats, soft waste or
any type of soft non-rigid material.
Super Shred 3
Owners Manual Safety
9
2.3 Storage Safety
Important!
When storing your Super Shred 3 special attention should be drawn to the
areas listed below.
2 Weeks - 1 Month Storage
Before storage it is important that the machine is clean. Any time the
machine is left for more than 2 weeks, the machine must be cleaned
thoroughly. The cleaning process must include cleaning the upper hopper,
degreasing shredder rotors and scraper bars, and removing any remnants
from below the shredding box. It is also important to turn off the master
switch and lockout the machine, so accidental operation cannot occur.
When the machine is removed from storage, and prepared for operation, a
safety switch inspection must occur. After a safety switch inspection, the
machine is ready for operation.
1+ Month Storage
All the steps must occur as with the 2 Week – 1 Month Storage cycle. It is
important to ensure that the machine is clean to prevent any corrosion or
drying of material to machine surfaces. It is also important to turn off the
master switch and lockout, so accidental operation cannot occur. In
addition to switch inspection upon restarting after inspection, the gearbox
oil level must be checked, belts inspected for dryness, and spur gears
greased. (see page 11).
Super Shred 3
Safety Owners Manual
10
2.4 CSA Certification
This Super Shred 3 has been CSA Certified for use in any province in
Canada. A CSA inspection sticker will be placed either on the front
electrical panel, or on the back on the Super Shred 3.
Any modifications to the electrical or mechanical systems without approval
from Split-fire on the Super Shred 3 will result loss of warranty coverage
and CSA certification. If any modifications are completed, the Super Shred
must be re-CSA certified. CSA certification ensures electrical and operator
safety for Super Shred 3.
Table of contents
Popular Paper Shredder manuals by other brands
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Start here
GBC
GBC ShredMaster CC055 instruction manual
UNITED OFFICE
UNITED OFFICE UAV 190 A1 operating instructions
UNITED OFFICE
UNITED OFFICE UAV 190 A1 operating instructions
Rexel
Rexel Optimum AutoFeed+ 45X instruction manual
Martin Yale
Martin Yale 227284S1 instruction manual
