Spectro-UV Spectroline uVision Series User manual

7/20 AM17056ML-4

PRINTED IN U.S.A

uVision™ Series

UV-A/White Light LED NDT Inspection Lamp

Part No. UV-365HC; UV-365MHC

www.Spectro-UV.com

4 Dubon Ct., Farmingdale, NY 11735

866-230-7305

ENG - 1 FR - 13 ES - 25 DE - 37

WARNING

UV emitted from this product.Avoid eye and skin exposure to unshielded products.

FOR PROFESSIONAL EXAMINATION USE ONLY

OPERATION

• The uVision™ series UV-A inspection lamps are equipped with a heavy-duty power

cord.

• The lamp is shipped with the correct cord installed for the country of destination.

• Connect the plug to a power source that complies with the electrical requirements

specified on the label.

• The lamp has a three-position rocker power switch (II – UV; O – off; I – white light) on

the handle.

• The UV-365HC and UV-365MHC have White Light Intensity Adjustment Controls located

on the back plate of the lamp. The Battery Indicator is also located on the back plate of

the lamp. When the UV-365MHC battery is nearly depleted, the light will flash between

Red and Orange. Detailed instructions for recharging the battery are located on Page 4.

• WARNING: Be sure to use genuine uVision™ replacement parts. Using another

manufacturer’s replacement parts could affect product performance and will void the

warranty.

Rocker Switch

Battery

Indicator

White Light

Intensity

Adjustment

IMPORTANT SAFETY INSTRUCTIONS (Read all instructions)

• Do not operate the uVision™ Series UV-A/White Light LED NDT Inspection Lamp

(UV-365HC/UV-365MHC) with a damaged cord or if the lamp has been physically

damaged.

• Do not look directly into the light. ALWAYS wear the UV-absorbing protective glasses

provided when operating the lamp. Use in low-light conditions to achieve the best

inspection results. The darker the room, the greater the fluorescent contrast.

• The uVision™ is not approved for use in hazardous atmospheres. Do not attempt to use

it in areas requiring explosion-proof lighting.

• Never use this equipment in any manner not specified in these instructions because

your protection may be impaired.

• NEVER aim the lamp in the direction of another human being. It is meant for

professional fluorescent inspections ONLY!

• DO NOT attempt to modify the lens assembly or light output. Doing so may alter the

performance and intensity of the uVision™.

CHANGING THE LAMP POWER SUPPLY

The appropriate cord for the country of destination will be installed on the lamp when it is

ordered. The power cord is integrated into the lower portion of the lamp handle, forming a

cord/handle assembly. A set of detailed instructions for changing the lamp cord come with

the replacement parts. Contact Customer Service for more details. Call toll-free 1-866-230-

7305.

DISASSEMBLING THE FILTER PROTECTOR FOR MAINTENACE

The outer rubber cover/filter holder may be removed periodically to clean the Borofloat®

glass filter. To disassemble the Borofloat®Filter Protector (FP-600), first remove the front

rubber cover/filter holder. Peel the rubber cover/filter holder toward the front portion of the

lamp.

The Borofloat®glass filter will remain inside the protector. To remove the Borofloat®glass

filter, peel around the edge of the rubber cover/filter holder and push the glass filter out.

To replace or reinsert the Borofloat®glass filter into the rubber cover/filter holder, slide the

Borofloat®glass filter into the channel of the rubber cover/filter holder. Manipulate the rubber

cover around the filter. Ensure the glass filter is evenly seated.

REPLACING THE UV LENSES

The UV-A lenses (UL-110) covering the three UV-A LEDs must be replaced over time. They

will solarize (become cloudy and yellow) from repeated use. A set of detailed instructions

come with the replacement UV-A lenses (UL-110). See Replacement Parts section and

contact Customer Service for more details.

ENVIRONMENTAL SPECIFICATIONS

The uVision™ series lamps are designed to be safe under the following conditions:

• For Indoor/Outdoor Use (dustproof and protected against jets of water);

• Temperature 41°F to 122°F (5°C to 50°C);

• Mains supply voltage fluctuations not to exceed ±10% of the nominal voltage.

LIMITED WARRANTY

The warranty policy for the uVision™ lamp is provided on the Certificate of Limited Warranty

enclosed separately with each unit. NOTE: For assistance of any kind, please contact the

Customer Service Department at Spectro-UV. Provide the model, the serial number of the

unit, and the date of purchase. The unit’s serialization information is located (1) on the

packaging the unit is shipped in, (2) engraved on the unit’s handle, and (3) labeled on the

reverse side of the unit’s back plate.

BATTERY LED INDICATOR STATUS

Orange = Power on, battery good

Blink Orange and Red = Low Battery; time left approx. 10 – 15 mins

Red = Dead Battery, Approx. 5 minutes or less remaining

Shut Down

MEASURING LAMP INTENSITY

To ensure that your uVision™ series lamp is operating at the required UV intensity, it should

be checked periodically. Spectro-UV offers a variety of sensors and meters.The AccuPRO™

XP-2000 combines the functionality of a UV and visible light radiometer/photometer, and is

specially designed to measure UV irradiance with wavelengths of 320–400nm (with peak

at 365nm) and visible light from 460–675nm (with peak at 555nm). Other suitable meters

include the AccuMAX™ XRP-3000 radiometer/photometer kit, using dual-wavelength

UV-A and VIS sensor detectors to accurately measure the irradiance of a light source. The

AccuMAX™ XR-1000 digital readout unit with the XS-365 UV sensor or the DM-365XA

digital readout unit can also be used for UV-A measurement. For more information about

these units, please contact the Customer Service Department at Spectro-UV. Call toll-free

1-866-230-7305.

CHARGING AND USAGE OF THE BP-30 BATTERY PACK (UV-365MHC ONLY)

The BP-30 battery pack must be fully charged before first use.

• Check if the voltage characteristics of the battery charger match the voltage of the AC

outlet.

• Align the male connector of the smart charger to the female connector of the battery pack

(BP-30) and plug them together. Twist the ring on the charger connector to make a tight

connection.

• Attach the AC cord supplied to the charger and plug the unit into a properly regulated AC

outlet.

• The indicator light on the charger will show Red while it is charging and Green when the

battery is charged. A full charge will take approximately 2 hours.

• After the battery is charged, unplug the charger from the outlet first. Unplug the charger

from the battery pack.

For AC Operation

• Align the male connector of the lamp to the female connector of the AC adapter and plug

them together.Twist the ring on the adapter connector to make a tight connection.Attach the

plug to the corresponding AC power source.

For DC Operation

• Align the male connector of the lamp to the female connector of the receptacle on the fully

charged BP-30 battery pack.

• The Battery Indicator light will be Orange when the battery is charged. When the battery is

nearly depleted, the light will flash between Red and Orange.

CARE AND USE OF NICKEL-METAL HYDRIDE (NiMH) BATTERIES

• NiMH battery packs last longer when charged and stored in a temperature range between

50°F to 86°F (10°C to 30°C) away from heat, sunlight and humidity.

• Always charge batteries to full capacity before long-term storage (approximately 30 days)

to prevent aging.After storage they must be charged, which may require conditioning (two or

three charge/discharge cycles) to reach full capacity.

• Do not subject these batteries to repeated deep discharges that run the batteries down

completely on a regular basis as this will greatly shorten battery life.

• NiMH batteries generally have no voltage sag until the last 10% of charge.

• NiMHs have no toxic lead or mercury, and a life expectancy of 500 charge/discharge cycles

or more, provided the battery is not overcharged or heavily discharged. Recycle according

to local disposal laws.

KEY FEATURES

• Nominal steady state intensity of 6,000 µW/cm2at 15 inches (38cm).

• Large 6.4-inch diameter coverage area at 15 inches (38cm) with a minimum

UV-A intensity of 1,200 µW/cm2(ASTM E3022-15).

• Less than 1.0 foot-candle (11 lux) emission.

• Long-lasting UV-A lenses.

• Cool running, fanless design.

• Lightweight and rugged construction.

• White Light, LED Inspection Light.

• IP65 Rated: The uVision™ Series lamps are protected from total dust ingress

and from low pressure jets of water (from all directions). For more details, consult

EN 60529 (British BS EN 60529:1992, European IEC 60509:1989).

• Certificate of Conformance (ASTM E3022-15) included.

TECHNICAL SPECIFICATIONS

uVision™ Series

UV-365HC UV-A (365nm) and white light

Height 7.5 inches

Length 4.25 inches

Width 3.75 inches

Weight 4.29lb. (1,946 g) with power supply;

1.94 lb. (880 g) without power supply.

Light Source 3 UV-A LEDs, 1 white light LED

ELECTRICAL SPECIFICATIONS

Input: 100-240V AC, 0.9, 50-60 Hz

Output: 15V DC, 2.4A

UV-365HC Technical Details

POWER CORD SPECIFICATIONS

LAMP PART NUMBER POWER REQUIREMENTS*

UV-365HC 120V/50–60Hz

UV-365HC/F 230V/50Hz

UV-365HC/FA 240V/50Hz

UV-365HC/FB 230V/50Hz

UV-365HC/FBR 220-240V/50-60Hz

*Each lamp is fitted with an 8-foot cord and the appropriate plug for the country of destination. An

optional 20-foot cord is available. The “/20” suffix denotes the 20-foot power cord options.

*See next page for detailed power cord information.

KEY FEATURES

• Nominal steady state intensity of 6,000 µW/cm2at 15 inches (38cm).

• Large 6.4-inch diameter coverage area at 15 inches (38cm) with a minimum

UV-A intensity of 1,200 µW/cm2(ASTM E3022-15).

• Less than 1.0 foot-candle (11 lux) emission.

• Long-lasting UV-A lenses.

• Cool running, fanless design.

• Lightweight and rugged construction.

• White Light, LED Inspection Light.

• IP65 Rated: The uVision™ Series lamps are protected from total dust ingress

and from low pressure jets of water (from all directions). For more details, consult

EN 60529 (British BS EN 60529:1992, European IEC 60509:1989).

• Certificate of Conformance (ASTM E3022-15) included.

• BP-30 Battery and Charging Set.

UV-365MHC Technical Details

*All power cords include the lower portion of the handle.

Technical Details continued on the next page.

UV-365HC POWER SUPPLY INFORMATION

LAMP COUNTRY VOLTAGE CORD

LENGTH

PART

NUMBER

UV-365HC US 120 8' 130260

UV-365HC/F EU 230 8' 130261

UV-365HC/FA AU 240 8' 130262

UV-365HC/FB UK 230 8' 130263

UV-365HC/FBR BR 220-240 8’ 130501

LAMP COUNTRY VOLTAGE CORD

LENGTH

PART

NUMBER

UV-365HC/20 US 120 20' 130264

UV-365HC/20/F EU 230 20' 130265

UV-365HC/20/FA AU 240 20' 130324

UV-365HC/20/FB UK 230 20' 130325

UV-365HC/20/FBR BR 220-240 20' 130500

TECHNICAL SPECIFICATIONS

uVision™ Series

UV-365MHC UV-A (365nm) and white light

Height 7.5 inches

Length 4.25 inches

Width 3.75 inches

Weight 4.29lb. (1,946 g) with power supply;

1.94 lb. (880 g) without power supply.

Light Source 3 UV-A LEDs, 1 white light LED

ELECTRICAL SPECIFICATIONS

Input: 100-240V AC, 0.9, 50-60 Hz

Output: 15V DC, 2.4A

LAMP COUNTRY VOLTAGE CORD

LENGTH

PART

NUMBER

UV-365MHC US 120 8' 130290

UV-365MHC/F EU 230 8' 130291

UV-365MHC/FA AU 240 8' 130292

UV-365MHC/FB UK 230 8' 130293

UV-365MHC/FBR BR 220-240 8’ 130502

LAMP COUNTRY VOLTAGE CORD

LENGTH

PART

NUMBER

UV-365MHC/20 US 120 20' 130294

UV-365MHC/20/F EU 230 20' 130295

UV-365MHC/20/FA AU 240 20' 130322

UV-365MHC/20/FB UK 230 20' 130323

UV-365MHC/20/FBR BR 220-240 20' 130503

POWER CORD SPECIFICATIONS

LAMP PART NUMBER POWER REQUIREMENTS*

UV-365MHC 120V/50–60Hz

UV-365MHC/F 230V/50Hz

UV-365MHC/FA 240V/50Hz

UV-365MHC/FB 230V/50Hz

UV-365MHC/FBR 220-240V/50-60Hz

*Each lamp is fitted with an 8-foot cord and the appropriate plug for the country of destination. An

optional 20-foot cord is available. The “/20” suffix denotes the 20-foot power cord options.

UV-365MHC POWER SUPPLY INFORMATION

UV-365HC EXPLODED VIEW

AND REPLACEMENT PARTS

www.Spectro-UV.com

4 Dubon Ct., Farmingdale, NY 11735

866-230-7305

Replacement Parts

UV-365SBLC REPLACEABLE PARTS LIST

DESCRIPTIONPART NO.QTYITEM

FILTER PROTECTOR ASSEMBLY

FP-6001BP

FRONT COVER PLATE/ FILTER ASSEMBL

12819611

FRONT COVER GASKET12838512

UV LED LENS, WITH ADHESIVE12942733

LAMP HOUSING ASSEMBLY13033614

8' US, 120V, POWER SUPPLY13026015a

8' EU, 230V, POWER SUPPLY

13026115b

8' AUS/CN, 240V, POWER SUPPLY

13026215c

8' UK, 230V, POWER SUPPLY

13026315d

20' US, 120V, POWER SUPPLY1302641

20' EU, 230V, POWER SUPPLY13026515f

20' AUS/CN, 240V, POWER SUPPLY13032415g

20' UK, 230V, POWER SUPPLY13032515h

A A

B B

C C

D D

WESTBURY, NEW YORK 11590

956 BRUSH HOLLOW ROAD

CORPORATION

SPECTRONICS

REV

DRAWING NUMBER

SIZE

DATE

APPROVED

CHECKED

DRAWN

TITLE

NEXT ASSY.

NO. REQ'D

SCALE

30'

.005

ANG.DEC.

UNLESS OTHERWISE SPECIFIED

DIMENSIONAL TOLERANCES

FRAC.

1/64

- -

FILE NAME & PATH

PROPERTY OF SPECTRONICS CORP; DO NOT DUPLICATE

MATERIAL FINISH SPECTRONICS PART NO.

A-17110

PHILIPC

5/26/2017

C:\Engineering\Projects\TRITAN\Ultravision 365\A-17110, UV-365SBLC ASSEMBLY, MANUAL.idw

UV-365SBLC

ULTRAVISION-365SBLC

MANUAL

1 2 3

5a 5b 5c 5d 5e 5f 5g 5h

ITEM QTY PART NO. DESCRIPTION

BP 1 FP-600 BOROFLOAT FILTER PROTECTOR

1 1 128196 FRONT COVER PLATE / FILTER ASSEMBLY

2 1 128385 FRONT COVER GASKET

3 3 UL-110 UV-A LENS

4 1 130336 LAMP HOUSING ASSEMBLY

5a 1 130260 POWER SUPPLY, 8', 120V, US

5b 1 130261 POWER SUPPLY, 8', 230V, EU

5c 1 130262 POWER SUPPLY, 8', 240V, AUS/CN

5d 1 130263 POWER SUPPLY, 8', 230V, UK

5e 1 130501 POWER SUPPLY, 8', 220-240V, BR

5f 1 130264 POWER SUPPLY, 20', 120V, US

5g 1 130265 POWER SUPPLY, 20', 230V, EU

5h 1 130324 POWER SUPPLY, 20', 240V, AUS/CN

5i 1 130325 POWER SUPPLY, 20', 230V, UK

5j 1 130500 POWER SUPPLY, 20', 220-240V, BR

QTY PART NO. DESCRIPTION

1 140005 PROTECTIVE CARRYING CASE (for 8’ models)

1 128333 PADDED CARRYING CASE (for 20’ models)

1 UVS-30 UV-ABSORBING SPECTACLES

Accessories

UV-365SBLC REPLACEABLE PARTS LIST

DESCRIPTIONPART NO.QTYITEM

FILTER PROTECTOR ASSEMBLY

FP-6001BP

FRONT COVER PLATE/ FILTER ASSEMBLY

12819611

FRONT COVER GASKET12838512

UV LED LENS, WITH ADHESIVE12942733

LAMP HOUSING ASSEMBLY13033614

8' US, 120V, POWER SUPPLY13026015a

8' EU, 230V, POWER SUPPLY

13026115b

8' AUS/CN, 240V, POWER SUPPLY

13026215c

8' UK, 230V, POWER SUPPLY

13026315d

20' US, 120V, POWER SUPPLY1302641

20' EU, 230V, POWER SUPPLY13026515f

20' AUS/CN, 240V, POWER SUPPLY13032415g

20' UK, 230V, POWER SUPPLY13032515h

A A

B B

C C

D D

WESTBURY, NEW YORK 11590

956 BRUSH HOLLOW ROAD

CORPORATION

SPECTRONICS

REV

DRAWING NUMBER

SIZE

DATE

APPROVED

CHECKED

DRAWN

TITLE

NEXT ASSY.

NO. REQ'D

SCALE

30'

.005

ANG.DEC.

UNLESS OTHERWISE SPECIFIED

DIMENSIONAL TOLERANCES

FRAC.

1/64

- -

FILE NAME & PATH

PROPERTY OF SPECTRONICS CORP; DO NOT DUPLICATE

MATERIAL FINISH SPECTRONICS PART NO.

A-17110

PHILIPC

5/26/2017

C:\Engineering\Projects\TRITAN\Ultravision 365\A-17110, UV-365SBLC ASSEMBLY, MANUAL.idw

UV-365SBLC

ULTRAVISION-365SBLC

MANUAL

1 2 3

5a 5b 5c 5d 5e 5f 5g 5h

Dimensions and Weight of the Power Supply

Length: 5 inches

Width: 4.5 inches

Height: 1.875 inches

Weight: 2.35 lb. (including power cables)

5a-5j

BATTERY POWER PARTS LIST

DESCRIPTIONPART NO.QTY

ITE

BATTERY AND CHARGING SET, 120V, US CONFIG

BP-301

BATTERY AND CHARGING SET, 230V, EU CONFIGBP-30/F

BATTERY AND CHARGING SET, 240V, AUS/CN CONFIGBP-30/FA1

BATTERY AND CHARGING SET, 230V, UK CONFIGBP-30/FB1

BATTERY CHARGER1268341

AC CORD, 8', 120V, US CONFIG1268371

AC CORD, 8', 230V, EU CONFIG

1268381

AC CORD, 8', 240V, AUS/CN CONFIG

1268401

AC CORD, 8', 230V, UK CONFIG1268391

12V BATTERY1303391

A A

B B

C C

D D

WESTBURY, NEW YORK 11590

956 BRUSH HOLLOW ROAD

CORPORATION

SPECTRONICS

REV

DRAWING NUMBER

SIZE

DATE

APPROVED

CHECKED

DRAWN

TITLE

NEXT ASSY.

NO. REQ'D

SCALE

30'

.005

ANG.DEC.

UNLESS OTHERWISE SPECIFIED

DIMENSIONAL TOLERANCES

FRAC.

1/64

- -

FILE NAME & PATH

PROPERTY OF SPECTRONICS CORP; DO NOT DUPLICATE

MATERIAL FINISH SPECTRONICS PART NO.

A-17112

PHILIP C

5/26/2017

C:\Engineering\Projects\TRITAN\Ultravision 365\A-17###, UV-365MSBLC ASSEMBLY\A-17112,

UV-365MSBLC, ASSEMBLY, MANUAL.idw

UV-365MSBLC

MANUAL

LIGHT ASSEMBLY

ITEM QTY PART NO. DESCRIPTION

BP 1 FP-600 FILTER PROTECTOR ASSEMBLY

1 1 128196 FRONT COVER PLATE FILTER ASSEMBLY

2 1 128385 FRONT COVER GASKET

3 3 129427 UV LED LENSES

41130336 LAMP HOUSING ASSEMBLY

51 130297 CORD, HANDLE ASSEMBLY (3.5')

6a 1 130290 POWER SUPPLY, 8', 120V, US CONFIG

6b 1 130291 POWER SUPPLY, 8', 230V, EU CONFIG

6c 1130292 POWER SUPPLY, 8', 240V, AUS/CN CONFIG

6d 1130293 POWER SUPPLY, 8', 230V, UK CONFIG

6e 1 130294 POWER SUPPLY, 20', 120V, US CONFIG

6f 1 130295 POWER SUPPLY, 20', 230V, EU CONFIG

6g 1 130322 POWER SUPPLY, 20', 240V, AUS/CN CONFIG

6h 1130323 POWER SUPPLY, 20', 240V, UK CONFIG

1 2 3 4

6a 6b 6c 6d 6e 6f 6g 6h

ITEM QTY PART NO. DESCRIPTION

7a 1 BP-30 BATTERY PACK, 120V, US

7b 1 BP-30/F BATTERY PACK, 230V, EU

7c 1 BP-30/FA BATTERY PACK, 220-240V, AUS/CN

7d 1 BP-30/FB BATTERY PACK, 230V, UK

8a 1 BR-150A SMART CHARGER FOR BP-30, 120V, US

8b 1 BR-150A/F SMART CHARGER FOR BP-30, 230V, EU

8c 1 BR-150A/FA SMART CHARGER FOR BP-30, 220-240V, AUS/CN

8d 1 BR-150A/FB SMART CHARGER FOR BP-30, 230V, UK

Replacement Parts

BP-30

BR-150A

ITEM QTY PART NO. DESCRIPTION

7a 1 BP-30 BATTERY PACK, 120V, US

7b 1 BP-30/F BATTERY PACK, 230V, EU

7c 1 BP-30/FA BATTERY PACK, 220-240V, AUS/CN

7d 1 BP-30/FB BATTERY PACK, 230V, UK

7e 1 BP-30/FBR BATTERY PACK, 220-240V, BR

8a 1 BR-150A SMART CHARGER FOR BP-30, 120V, US

8b 1 BR-150A/F SMART CHARGER FOR BP-30, 230V, EU

8c 1 BR-150A/FA SMART CHARGER FOR BP-30, 220-240V, AUS/CN

8d 1 BR-150A/FB SMART CHARGER FOR BP-30, 230V, UK

8e 1 BR-150A/FBR SMART CHARGER FOR BP-30, 220-240V, BR

BP-30

BR-150A

7a-7e

8a-8e

Other manuals for Spectroline uVision Series

This manual suits for next models

Table of contents

Languages:

Other Spectro-UV Work Light manuals

Spectro-UV

Spectro-UV Spectroline uVision Series User manual

Spectro-UV

Spectro-UV Spectroline E/12 Series User manual

Spectro-UV

Spectro-UV SPECTROLINE uVision Series User manual

Spectro-UV

Spectro-UV Spectroline Vintage 365 User manual

Spectro-UV

Spectro-UV Spectroline uVision Series User manual

Spectro-UV

Spectro-UV Spectroline uVision Series User manual

Popular Work Light manuals by other brands

ANSMANN

ANSMANN POWERLIGHT 5.1 operating instructions

RTRMAX

RTRMAX RTX1868 instruction manual

FeinTech

FeinTech LAL00220 quick start guide

Bunker Hill Security

Bunker Hill Security 64735 user manual

Goobay

Goobay 30450 user manual

REV Ritter

REV Ritter SPOT Assembly and operating instructions

Ignition

Ignition Stagepix Line 100 IP user manual

SCANGRIP

SCANGRIP DUO CONNECT manual

Bosch

Bosch GLI 18 V operating instructions

Bayco

Bayco SL-1514 instruction manual

EUFAB

EUFAB SMD LED 8+1 operating instructions

DeWalt

DeWalt DCL510 Original instructions

PowerSmith

PowerSmith PWLD080T Operator's manual

MaxLite

MaxLite 73683 installation instructions

Heitronic

Heitronic Trend 27867 Installation and operating instructions

Monzana

Monzana Gore MZCL10 manual

EINHELL

EINHELL TE-CL 18/2000 LiAC Original operating instructions

Bayco

Bayco NIGHTSTICK Dual-Light Xtreme Lumens... instruction manual