Spartan 1331 User manual
CROSSTRAINER BASIC+ ITEM NO: 1331
OWNER’S MANUAL
IMPORTANT: Read all instructions carefully before using this product. Retain this
owner’s anual for future reference.
The specifications of this product ay vary fro this photo, subject to change without
notice.
IMPORTANT SAFETY INSTRUCTIONS ------------------------------------------- 2
PARTS LIST ------------------------------------------------------------------------------- 3
HARDWARE PACKING LIST --------------------------------------------------------- 5
TOOLS -------------------------------------------------------------------------------------- 6
OVERVIEW DRAWING ----------------------------------------------------------------- 7
ASSEMBLY INSTRUCTIONS --------------------------------------------------------- 8
OPERATING THE COMPUTER ------------------------------------------------------ 15
AD USTMENTS -------------------------------------------------------------------------- 16
MAINTENANCE -------------------------------------------------------------------------- 17
TROUBLESHOOTING ------------------------------------------------------------------ 17
WARM UP AND COOL DOWN ROUTINE ----------------------------------------- 18
IMPORTANT SAFETY INSTRUCTIONS
Basic precautions should alwa s be followed, including the following important
safet instructions when using this equipment: Read all instructions before using
this
equipment.
1. Read all instructions and follow it carefully before using this equipment. Make sure the
equipment is properly assembled and tightened before use.
2. Before exercise, in order to avoid injuring the muscle, warm-up exercise is necessary.
Refer to the Warm Up and Cool Down Routine pages. After exercise, relaxation of the
body is suggested for cool-down.
3. Please make sure all parts are not damaged and fixed well before use. This equipment
should be placed on a flat surface when using. Using a mat or other covering material
on the ground is recommended.
4. Please wear proper clothes and shoes when using this equipment; do not wear clothes
that might catch any part of the equipment.
5. Do not attempt any maintenance or adjustments other than those described in this
manual. Should any problems arise, discontinue use and consult your local dealer.
6. Be careful when step on or leave the pedal always hold the handlebars first. Make the
pedal at your side at the lowest position, step on the pedal, and stride over the main
frame then step on the other pedal. When using, please hold the handlebar by hands,
make the pedals running smoothly by push or pull handlebars, then run the equipment
regularly by cooperation of hands and feet. After exercise, please also make one
pedal at the lowest position and leave your foot on the higher pedal first and then
another.
7. Do not use the equipment outdoors.
8. This equipment is for household use only.
9. Only one person at a time should use this equipment.
10. If you feel any chest pains, nausea, dizziness, or short of breath, you should stop
exercising immediately and consult your physician before continuing.
11. Care should be taken in mounting or dismounting the equipment.
12. Do not allow children to use or play on the equipment. Keep children and pets away
from the equipment while in use. This machine is designed for adults use only. The
minimum free space required for safe operation is not less than two meters.
13. The maximum weight capacity for this product is 250 LBS/110 kgs.
WARNING: Before beginning an exercise program consult our
ph sician. This is especiall important for the persons who are over 35 ears old or
who have pre-existing health problems. Read all instructions before using an
fitness equipment.
CAUTION: Read all instructions carefull before operating this product.
Retain this Owner’s Manual for future reference.
PARTS LIST
No. Description Qt No. Description Qt
001 Main Frame Ø50x2
hlavní rám
hlavný rám
1 027 Nylon Nut M6
nylonová matice
nylonová matica
8
002L Left Foot Bar 40x25x1.5
levý stupátko
lavé stúpátko
1 028 Washer Ø6
podložka
7
002R Right Foot Bar 40x25x1.5
pravé stúpátko
1 029 Bolt M6x40
šroub
skrutka
6
003L Left Handrail Arm Ø32x1.5
levá paže zábradlí
lavá paža zábradlia
1 030 Tension Cable L=1600
kabel napětí
kábel napätia
1
003R Right Handrail Arm Ø32x1.5
pravá paže zábradlí
pravá paža zábradlia
1 031 Bolt Cap S13
zakončení šroubu
2
004L Left Handrail Ø32x1.5
levé zábradlí
1 032 Screw ST4.2x25
šroub
skrutka
7
004R Right Handrail Ø32x1.5
pravé zábradlí
1 033L Foot Bar Cover-A 2
005 Front Post Ø50x1.5 1 033R Foot Bar Cover-B 2
006 Handlebar Ø28x1.5
řidítká
riadidlá
1 034 Big Washer Ø20xØ8x2
velká podložka
2
007 Bolt M6x10
šroub
1 035 Bolt Ø15.8x62.5
šroub
2
skrutka skrutka
008 Screw ST2.9x10
šroub
skrutka
2 036 Left Foot Pedal 395x150x65 1
009 Hexagon Head Bolt M8x30
šestihranní šroub
1 037 Right Foot Pedal 395x150x65 1
010 Front Stabilizer Ø50x1.5x480
přední stabilizátor
predný stabilizátor
1 038 Front Stabilizer End Cap Ø50
predné zakončenie stabilizátora
2
011 Rear Stabilizer Ø50x1.5x480
zadní stabilizátor
zadný stabilizátor
1 039 Bolt M6x48
šroub
skrutka
2
012 Bolt M10x57
šroub
skrutka
4 040 Transport Wheel Ø23xØ6x32
transportní kolo
transportné kolo
2
013 Rear Stabilizer End Cap
Ø50x1.5
2 041 Bolt M8x16
šroub
skrutka
8
014 Big Curve Washer Ø10
velká kulatá podložka
velká gulatá podložka
4 042 Curve Washer Ø20xØ8
kulatá podložka
gulatá podložka
6
015 Cap Nut M10 4 043 Bolt M10x18
šroub
skrutka
2
016L Bolt for left U Shape Bracket
Ø16x88.5xL23
1 044 Spring Washer Ø18xØ10x2
napínací podložka
napínacia podložka
2
016R Bolt for right U Shape Bracket
Ø16x88.5xL23
1 045 Washer Ø28x5
podložka
2
017L Left Nylon Nut 1/2” 1 046 Powder Metal Bushing
Ø33xØ29xØ16x14x4
4
017R Right Nylon Nut 1/2” 1 047 Bolt M6x35 4
018 Wave Washer Ø28xØ17x0.3
vlněná podložka
2 048 Curve Washer Ø6 4
019 Powder Metal Bushing
Ø29xØ16x14
8 049 Bolt Cap S16 2
020 Spring Washer Ø12
napínací podložka
napínacia podložka
2 050 Cap Nut M6 4
021 Bearing 6000 2Z
ložisko
2 051 Plastic Bushing Ø32xØ16x5xØ50 2
022 Washer Ø40xØ24xδ2.5 1 052L Left Handrail Arm Cover-A 1
023 U Shape Bracket 2 052R Right Handrail Arm Cover-A 1
024 Nylon Nut M8
nylonová matice
nylonová matica
2 053L Left Handrail Arm Cover-B 1
025 Washer Ø16xØ8x1.5 2 053R Right Handrail Arm Cover-B 1
podložka
026 Bolt M8x50
šroub
skrutka
2 054 Tension Control Knob 0325-
BC62003-0101
knoflík napětí
1
PARTS LIST
No. Description Qt No. Description Qt
055 Screw ST2.9x12
šroub
skrutka
8 075 Bearing Nut II 7/8”
ložisková matica
1
056 Computer VT 29104
počítač
1 076 Washer Ø34.5xØ23x2.5
podložka
1
057 Bolt M5x12
šroub
skrutka
4 077 Hexagon Nut 7/8”
šestihranná matica
1
058 Hand Pulse Sensor with Wire
L=750
2078 Belt Pulley with Crank Ø240 1
059 Handrail Foam Grip
Ø31xØ37x480
2079 Powder Metal Bushing Ø18xØ8x5 4
060 Spring Washer Ø8
napínací podložka
6 080 Nut for Flywheel M10x1.25 2
061 Handrail End Cap Ø32x1.5 2 081 Flywheel Ø230x40x32 1
062 Handlebar End Cap Ø28x1.5 2 082 Belt P 330 6 1
063 Screw ST4.2x20 2 083 Idle Wheel Bracket 1
064 Curve Washer for Tension
Control Knob Ø20xØ5.2
1084 Bolt M8x20
šroub
skrutka
2
065 Bolt for Tension Control Knob
M5x25
1085 Eyebolt M6x36 2
066 Phillips Self Tapping Screw
ST4.2x25
4086 Tension Bracket 31x31xδ1.0 2
067 Sensor Wire I L=1100
senzorový drát
1 087 Spring Washer Ø6
napínací podložka
2
068 Sensor Wire II L=950
senzorový drát
1 088 Hexagon Nut M6
šestihranná matice
2
069 Screw ST4.2x20
šroub
skrutka
4089 Bolt M8x10
šroub
skrutka
1
070 Left Cover 544x345x86
levý kryt
1090 Handlebar Foam Grip
Ø33xØ27x360
2
071 Right Cover 544x345x84
pravý kryt
1 091 Cover Cap Ø40xØ25x10 2
072 Bearing Cup Ø51.5
ložisková
2092 Big Washer Ø20xØ10x2
velká podložka
2
073 Bearing 2 093 Curve Washer Ø16xØ8x1.5 2
ložisko kulatá podložka
074 Bearing Nut I 15/16”
ložisková matica
1 094 Washer Ø10.2xØ14xδ1.0
podložka
2
HARDWARE PACKING LIST
TOOLS
Multi Hex Tool
S10, S13, S17, S19
1 PC
Allen Wrench S6
1 PC
Allen Wrench S8
1 PC
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
1 PC
(12) Bolt M10x57
4 PCS
(15) Cap Nut M10
4 PCS
(16R) Bolt for right U Shape
Bracket Ø16x88.5xL23 1
PC
(17R) Right Nylon Nut 1/2” 1
PC
(18) Wave Washer
Ø28xØ17x0.3
1 PC
(20) Spring Washer Ø12 1
PC
(16L) Bolt for left U Shape
Bracket Ø16x88.5xL23 1
PC
(17L) Left Nylon Nut 1/2” 1 PC
(18) Wave Washer
Ø28xØ17x0.3
1 PC
(20) Spring Washer Ø12 1
PC
(27) Nylon Nut M6
6 PCS
(28) Washer Ø6
6 PCS
(29) Bolt
M6x40
6 PCS
(31) Bolt Cap
S13
2 PCS
(14) Big Curve Washer
Ø10
4 PCS
(47) Bolt
M6x35
4 PCS
(48) Curve Washer
Ø6
4 PCS
(55) Screw ST2.9x12
8 PCS
(69) Screw ST4.2x20
4 PCS
(49) Bolt Cap S16
2 PCS
(50) Cap Nut M6
4 PCS
OVERVIEW DRAWING
ASSEMBLY INSTRUCTIONS
1. Front and Rear Stabilizers Installation
Position the Front Stabilizer (10) in front of Main Frame (1) and align bolt holes.
Attach the Front Stabilizer (10) onto the front curve of the Main Frame (1) with two M10x57
Bolts (12), two Ø10 Big Curve Washers (14), and two M10 Cap Nuts (15). Tighten cap nuts
with the Multi Hex Tool provided.
Position the Rear Stabilizer (11) behind the Main Frame (1) and align bolt holes.
Attach the Rear Stabilizer (11) onto the rear curve of the Main Frame (1) with two M10x57
Bolts (12), two Ø10 Big Curve Washers (14), and two M10 Cap Nuts (15). Tighten cap nuts
with the Multi Hex Tool provided.
Hardware:
Multi Hex Tool
S10, S13, S17, S19
Tool:
(12) Bolt M10x57
4 PCS
(15) Cap Nut M10
4 PCS
(14) Big Curve Washer
Ø10
4 PCS
Table of contents
Other Spartan Elliptical Trainer manuals
Popular Elliptical Trainer manuals by other brands
Bonn Germany
Bonn Germany Concept 2.2 user manual
Precor
Precor Resolute RSL 620 Assembly guide
NordicTrack
NordicTrack E 9.2 Elliptical HASZNALATI UTASITAS
Vision Fitness
Vision Fitness X6600iNetTV Assembly guide
Matrix
Matrix MX-A5x owner's manual
SportsArt Fitness
SportsArt Fitness ECO-NATURAL Elite E874 owner's manual
