sparkfun WIG-13660 User manual
Tsunami Super WAV Trigger Hookup Guide
Introduction
NOTE: This guide is for the Tsunami Super WAV Trigger (Qwiic). For the previous version of this board, the
Tsunami Super WAV Trigger (without a Qwiic connector), please refer to the original Tsunami hookup guide.
NOTE: This can be a relatively complex and overwhelming product for novice users, due to the numerous
configuration options that make it so versatile. Novice users, may want to consider the WAV Trigger or MP3
Trigger first.
The Tsunami Super WAV Trigger (Qwiic) is a polyphonic WAV file player that was developed in collaboration with
Robertsonics (a portion of each sale goes back to them for product support and development). The Tsunami Super
WAV Trigger (Qwiic) is an improved version of the Tsunami Super WAV Trigger (the bigger brother of the WAV
Trigger), which can now, be controlled through the Qwiic connect system.
WAV Trigger
WIG-13660
MP3 Trigger
WIG-13720
Y
O
U
R
A
C
C
O
U
N
T
L
O
G
I
N
R
E
G
I
S
T
E
R
Users familiar with the original Tsunami, will notice a few improvements to the Qwiic Tsunami:
Input Voltage: 5 - 10V
USB-C Connector
RGB Status LED
I C Control
Qwiic Connector
New Audio Codec
Digital Filters
Comparison Table
Tsunami WAV Trigger (Qwiic) Tsunami WAV Trigger WAV Trigger
Power
Range:
Inputs:
5 - 10V
USB-C and PTH
5 - 15V
micro-B USB and PTH
6 - 15V
DC Barrel Jack
Tracks
Number:
Layer Mixing:
Up to:
4096 uncompressed files
18 stereo WAV files
32 mono WAV files
Up to:
4096 uncompressed files
18 stereo WAV files
32 mono WAV files
Up to:
2048 uncompressed files
14 stereo WAV files
Audio Outputs 8-channel (Mono)
4-channel (Stereo)
8-channel (Mono)
4-channel (Stereo)
3.5mm TRRS Audio Jack
Speaker connector (PTH)
Mono amplifier
Audio Input Line-level stereo Line-level stereo None
Tsunami Super WAV Trigger (Qwiic)
WIG-18159
2
Control
Triggers:
Serial:
Qwiic (I C):
16 (3.3V)
Yes (3.3V)
Yes (3.3V)
16 (3.3V)
Yes (3.3V)
N/A
16 (5V or 3.3V)
Yes (5V or 3.3V)
N/A
Status LED RGB Blue Red
Hot Swap SD Card Yes (with RESET button) Yes (with RESET button) No
Firmware Updates via SD card via SD card via serial port
MIDI Dedicated I/O pins Dedicated I/O pins Possible via serial port
Required Materials
The Qwiic Tsunami does need a few additional items, including a pair of (corded) headphones, for users to get
started with this tutorial. You may already have a few of these items, including the required USB-C cable, so feel
free to modify your cart based on your needs.
Note: For the best results, we recommend Class 10 SD cards with a FAT16 or FAT32 file system format and
a 32kB file allocation size. We recommend avoiding:
The 1GB SparkX SD Card, from our catalog, since it isn't a Class 10 card and can lead to reliability
issues.
SD Cards with a capacity larger than 32GB, since it can be difficult to convert them to the FAT16 or
FAT32 file system format with a 32kB file allocation size.
For more information on compatible SD cards, please check out the Robertsonics website.
2
Product Showcase: Tsunami Super WAV TriggerProduct Showcase: Tsunami Super WAV Trigger
There are other additional component options available from our catalog (click the button below to display).
ADDITIONAL COMPONENT OPTIONS (TOGGLE)
Arduino Example
For the Arduino example, a RedBoard Qwiic Plus and Qwiic cable are required. There are also alternative part
options for this example as well (click button below to toggle options).
Tsunami Super WAV Trigger (Qwiic)
WIG-18159
microSD Card - 16GB (Class 10)
COM-15051
IC Hook Test Leads
CAB-00501
microSD USB Reader
COM-13004
SparkFun TRRS 3.5mm Jack Breakout
BOB-11570
USB 3.1 Cable A to C - 3 Foot
CAB-14743
ALTERNATIVE MICROCONTROLLER AND QWIIC PARTS (TOGGLE)
Suggested Reading
Note: Robertsonics has a more detailed about this product on their Tsunami product page. Robertsonics also
provides a cross-platform utility for generating Tsunami configuration files and updating the firmware. All of
which, can be downloaded from the Robertsonics' Tsunami downloads page.
If you're unfamiliar with serial terminals, jumper pads, or I C be sure to checkout some of these foundational
tutorials.
SparkFun Qwiic Cable Kit
KIT-15081
SparkFun RedBoard Plus
DEV-18158
USB 3.1 Cable A to C - 3 Foot
CAB-14743
2
Logic Levels
I2C
Learn the difference between 3.3V and 5V devices and
logic levels.
An introduction to I2C, one of the main embedded
communications protocols in use today.
Analog vs. Digital
This tutorial covers the concept of analog and digital
signals, as they relate to electronics.
Serial Terminal Basics
This tutorial will show you how to communicate with
your serial devices using a variety of terminal emulator
applications.
How to Solder: Through-Hole Soldering
This tutorial covers everything you need to know about
through-hole soldering.
SD Cards and Writing Images
How to upload images to an SD card for Raspberry Pi,
PCDuino, or your favorite SBC.
MIDI Tutorial
Understanding the Musical Instrument Digital Interface.
Tsunami Hookup Guide
Hit the ground running with Tsunami, the Super Wav
Trigger.
The Tsunami Super WAV Trigger also utilizes the Qwiic connect system. We recommend familiarizing yourself with
the Logic Levels and I C tutorials (above) before using it. Click on the banner above to learn more about our
Qwiic products.
Installing an Arduino Library
How do I install a custom Arduino library? It's easy!
This tutorial will go over how to install an Arduino
library using the Arduino Library Manager. For libraries
not linked with the Arduino IDE, we will also go over
manually installing an Arduino library.
Installing Arduino IDE
A step-by-step guide to installing and testing the
Arduino software on Windows, Mac, and Linux.
SparkFun Serial Basic CH340C Hookup Guide
SparkFun Serial Basic Breakout takes advantage of
USB-C and is an easy-to-use USB-to-Serial adapter
based on the CH340C IC from WCH. With USB-C you
can get up to three times the power delivery over the
previous USB generation and has the convenient
feature of being reversable.
RedBoard Plus Hookup Guide
This tutorial covers the basic functionality of the
RedBoard Plus. This tutorial also covers how to get
started blinking an LED and using the Qwiic system.
2
SparkFun's Qwiic Connect SystemSparkFun's Qwiic Connect System
Hardware Overview
Note: For more details on the Tsunami Super WAV Trigger (Qwiic) check out these resources from the
Robertsonics website:
Tsunami User Guide
Tsunami Product Page and FAQ
Robertsonics Tutorial Page
Board Dimensions
The dimensions for the Qwiic Tsunami are essentially the same as the original Tsunami. The overall board size is
2.95" x 2.925" (approx. 7.5cm x 7.4cm) and includes four 0.13" mounting holes, which are compatible with
standard 4-40 screws.
The dimensions for the Qwiic Tsunami. (Click to enlarge)
Power
WARNING: The input voltage on the Qwiic Tsunami is limited to 5 - 10V; while the original Tsunami had a
voltage range up to 15V. Users swapping or replacing boards should be aware of this change; exceeding the
input voltage range will damage the board permanently.
There is a status LED to help make sure that the Qwiic Tsunami is getting power. On the Qwiic Tsunami, users can
power the board through either the USB-C connector or the power breakout pins ( VIN and GND ). We
recommend users power the board through the USB-C connector.
The power connections on the Qwiic Tsunami. (Click to enlarge)
The input voltage range for the power pins is 5V - 10V, but we recommend providing a 5V supply. The current
draw from the Qwiic Tsunami is approximately 220mA (at 5V) at idle with an SD card inserted. When playing audio
files, the current draw increases. (When testing, playing a single .wav file to a mono (single) channel output, the
current draw spiked just past 240mA.)
By default, the board's power is isolated from the polarized Qwiic connector system. Although it isn't
recommended, users can modify the 3V3_Qwiic jumper to draw power from the Qwiic connector (see jumper
section below). The Qwiic system is meant to run on 3.3V, be sure that another voltage is NOT used with the Qwiic
system.
Polyphonic Engine
The operation of the polyphonic engine on the Tsunami is proprietary to Robertsonics. While we can't go into exact
details on how the board works, here are some highlights of the board:
The primary polyphonic engine components of the Qwiic Tsunami. (Click to enlarge)
Supports up to 4096 uncompressed 16-bit, 44.1kHz mono or stereo WAV files – CD quality
Polyphonic – Play and mix 32 mono or 18 stereo tracks independently and simultaneously
Dynamic routing to 8 mono or 4 stereo outputs
Seamless looping over arbitrary track length
Independent real-time volume and playback rate control per output
Pause and resume individual or groups of tracks
Minimal trigger-to-sound delay: 8 msecs typ, 12 msecs max
Trigger inputs can be individually inverted and set to be edge, latched, or level sensitive
Dedicated MIDI I/O
Assign individual MIDI notes to specific outputs, with individual looping control
Outputs provide independent real-time playback rate control and MIDI Pitch Bend
MIDI Velocity-sensitive triggering of up to 4096 tracks, adjustable attack and release times
Line-level stereo audio input
Output volumes adjustable from +10dB to -70dB
Firmware track fades (attacks & decays)
Extensive serial and I C control (Default I C address: 0x13)
Reset button allows changing SD cards without power-cycle
Firmware updates from µSD card. No additional hardware required
For more details, users can checkout the Tsunami product page on the Robertsonics website.
µSD Card Slot
Note: For the best results, we recommend Class 10 SD cards with a FAT16 or FAT32 file system format and
a 32kB file allocation size. We recommend avoiding:
The 1GB SparkX SD Card, from our catalog, since it isn't a Class 10 card and can lead to reliability
issues.
SD Cards with a capacity larger than 32GB, since it can be difficult to convert them to the FAT16 or
FAT32 file system format with a 32kB file allocation size.
For more information on compatible SD cards, please check out the Robertsonics website.
A µSD card is used store the audio *.wav files and initialization tsunami.ini file (optional) for the Qwiic Tsunami.
The µSD card slot contains a spring-loaded locking mechanism:
Insert the card and press in to lock the card into the slot.
Press in to unlock and remove the card from the slot.
22
This manual suits for next models
1
Table of contents
Other sparkfun Computer Hardware manuals
sparkfun
sparkfun RTK Express Technical document
sparkfun
sparkfun FTDI SmartBasic Technical document
sparkfun
sparkfun DEV-17272 Technical document
sparkfun
sparkfun NEO-M8P-2 Technical document
sparkfun
sparkfun H3LIS331DL User manual
sparkfun
sparkfun Gator:soil Technical document
sparkfun
sparkfun MicroMod Artemis Processor User manual
sparkfun
sparkfun MicroMod SAMD51 Technical document
sparkfun
sparkfun DEV-14034 Technical document
sparkfun
sparkfun AST-CAN485 Technical document
Popular Computer Hardware manuals by other brands
EMC2
EMC2 VNX Series Hardware Information Guide
Panasonic
Panasonic DV0PM20105 Operation manual
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 user manual
Gigabyte
Gigabyte B660M DS3H AX DDR4 user manual
Raidon
Raidon iT2300 Quick installation guide
National Instruments
National Instruments PXI-8186 user manual
