Sovereign FD2402 User manual
1
2400W IMPACT SHREDDER
Item No. 310477
Model No. FD2402
INSTRUCTION MANUAL
HHGL Limited, MK9 1BA HHGL (ROI) Limited, D02 X576 Aug. 21
Technical Support & Parts
Mon-Fri 9am-5pm Sat-Sun 11am-4pm
0343 515 1905
2
Intended purpose
Safety information
In the box
Assembly
Operation
Usage
Maintenance
Plug replacement
Troubleshooting
Technical Data
Disposal
Warranty
3
4
12
13
14
15
18
19
20
21
23
23
Contents
3
The shredder is intended for shredding brous and
wood-related materials, such as hedge and tree cuttings,
branches, bark and pine cones.
Any use not expressly permitted in this manual may damage
the shredder and pose a serious danger to the user.
Do not put stones, glass, metal, bones, plastics or fabrics
into the shredder.
The operator or user is responsible for accidents and injury or
damage to third parties.
The manufacturer will not be held responsible for any damage
caused by improper operation or use outside of intended usage.
INTENDED PURPOSE
4
Important - please read these instructions fully
before starting assembly
Symbols used in the instructions
Symbols on the shredder
Safety information
This shredder may cause serious injuries if used
incorrectly. Before using the shredder, read the user
manual carefully and familiarise yourself with all of the
controls. In cases of uncertainty, ask an expert for advice.
Keep the manual in a safe place and pass it on to any
subsequent owners, to ensure that the information
contained therein is available at all times.
Hazard symbols with information on prevention of
personal injury and property damage.
Precaution symbol (other symbols may be used instead of
an exclamation mark) with information on prevention of
harm/damage.
Notice symbol with information on how to handle the
device properly.
Warning!
Read the instruction manual.
Wear eye and hearing protection.
Wear hand protection.
Do not expose to moisture.
5
Symbols on the shredder (continued)
Caution! Switch o and remove plug from mains before
adjusting, cleaning or if the cord is entangled or damaged.
Danger! Rotating blades. Keep hands and feet out of
openings while the machine is running.
Keep bystanders away.
Caution! Moving blade.
Warning! Electric shock hazard.
Always unplug the shredder before carrying
Guaranteed noise power level in accordance with
Directive 2000/14/EC.
Do not dispose of electrical equipment in the
domestic waste.
Important - please read these instructions fully
before starting assembly
Safety information
out maintenance.
6
Important - please read these instructions fully
before starting assembly
Safety information
Symbols on the shredder (continued)
General Safety
The equipment is intended only for use in premises
in which the current bearing capacity of the network
is >=100 A per phase and which are supplied by a
distribution grid with a nominal voltage of 230/240V.
Class II equipment.
Protection against contact with the ngers and solid
foreign bodies with Ø > 12.5mm, as well as protection
against splashed water from all directions.
This device complies with the applicable European
directives, and an evaluation method of conformity for
these directives has been done.
The product complies with the applicable UK directives
and an evaluation method of conformity for these
directives was followed.
IMPORTANT! Read manual carefully before use and
keep for future reference.
• This device must not be used by people (including
children) with reduced physical, sensory or mental
capabilities or lack of experience and knowledge or people
unfamiliar with these instructions to use the machine, local
regulations may restrict the age of the operator;
• Keep children and pets at a safe distance away from the
device. Children must be supervised in order to ensure
that they do not play with the equipment.
7
Important - please read these instructions fully
before starting assembly
Safety information
General Safety (continued)
Observe noise control and local regulations.
CAUTION! When using power tools, observe the following
basic safety measures for the prevention of electric
shocks and the risk of injury and re:
•
Never allow children or other persons unfamiliar with the
user manual to use the shredder. Local regulations or bylaws
may determine the minimum age for using the shredder.
Become familiar with the instruction manual before attempting
to operate this device.
•
Never use the shredder with other persons or animals nearby.
• Wear hearing and eye protection (PPE) at all times when
using the shredder.
• Wear appropriate protective clothing, such as protective
gloves, rm footwear and long trousers. Do not wear
loosely tting clothes or clothes with dangling cords or
belts. Keep long hair tied back.
• Only use the shredder in the open (away from walls or
other rigid structures) on a rm, level surface.
• Do not use the machine on a paved, gravelled area, which
could be damaged by ejected material.
• Before you start up the shredder, check that all of the
nuts, bolts and other fastenings are tight. Covers and
shields must be fastened properly and in good working
order. Replace any damaged or illegible warning labels.
8
Important - please read these instructions fully
before starting assembly
Safety information
General Safety (continued)
• Only use suitable like-for-like replacement parts
and accessories.
• Do not leave the shredder working unattended and keep
it in a safe, dry place out of children’s reach.
• While being used in the open, connect the shredder to a
residual current (RC) circuit breaker with a trip current of
no more than 30mA.
• When servicing the cutting device, be aware that even
though the power source will not start due to the interlock
feature of the guard, the cutting means can still be moved
by a manual starting mechanism.
• Shut o the power unit before attaching or removing
the bag.
• Keep all guards and deectors in place and in good
working condition.
Working with the device
• Make sure that the funnel feeder is empty before you
start the shredder.
•
Keep your head, hair and body away from the intake opening.
• Do not reach into the funnel feeder during operation.
The shredder will continue to run for a short period after
you switch it o.
• Always make sure you are standing in a rm, balanced
position. Do not lean forwards, and never lean over the
shredder when inserting materials.
9
Important - please read these instructions fully
before starting assembly
Safety information
General Safety (continued)
• Make sure that the material inserted into the shredder
does not contain hard objects made of metal, stone, glass
or similar.
• Do not use the shredder in the rain or in bad weather.
Work in daylight or under good articial lighting conditions.
• Do not operate the shredder when you are tired
or distracted, or under the inuence of alcohol or
medication. Always take a break when you need one and
be sensible about how you work.
• Switch the shredder o and disconnect it from the power
source, under the following circumstances:
- when you are not using the device
- transporting it or leaving it unattended
- before releasing a jammed blade
- when you are checking the device, cleaning it or
removing blockages
- when you are carrying out cleaning or maintenance
work or replacing accessories
- before moving or lifting the shredder
- if foreign objects should enter the shredder, and
it makes unfamiliar noises or vibrations (check the
shredder for damage before starting it up again).
• Do not allow shredded material to accumulate near the
ejection area. This may otherwise hinder proper ejection
and force the material back up through the feeder.
• Do not transport or tip the shredder with the motor running.
10
Important - please read these instructions fully
before starting assembly
Safety information
General Safety (continued)
• Keep hands, other body parts and clothing out of the
lling chamber and ejection channel, and away from other
moving parts.
• In the event of blockages in the machine intake or
ejection, switch o the motor and disconnect the machine
from the mains power supply. Ensure that the motor
is free of rubbish and other accumulations, in order to
safeguard the motor from damage or possible re.
• Remember that the cutting tool is also activated when the
starting mechanism is started on a motor-operated machine.
• Handle the unit with care. Clean the ventilation slits
regularly; keep to the maintenance instructions.
• Do not overload your device. Work only within the
indicated range of performance. Do not employ any low
power machines for heavy work. Do not use your device
for purposes for which it has not been designed.
• Only switch the shredder o once the funnel feeder is
completely empty, since the shredder may otherwise clog
up and not be able to start afterwards.
• Do not attempt to repair the shredder yourself unless you
are qualied to do so. Any work not specied in this manual
may only be carried out by a qualied service centre.
CAUTION! The following states how damage to the
shredder and possible injury to people can be avoided:
Other manuals for FD2402
1
This manual suits for next models
1
Table of contents
Other Sovereign Paper Shredder manuals
Popular Paper Shredder manuals by other brands
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Start here
GBC
GBC ShredMaster CC055 instruction manual
UNITED OFFICE
UNITED OFFICE UAV 190 A1 operating instructions
UNITED OFFICE
UNITED OFFICE UAV 190 A1 operating instructions
Rexel
Rexel Optimum AutoFeed+ 45X instruction manual
Martin Yale
Martin Yale 227284S1 instruction manual
