4
is fully charged, the red LED light will turn off, and the LCD screen will also turn off.
Turning on/off the Bluetooth Earbuds
Take out the Earbud from the Recharging Case, it will turn on automatically ( O r, if the Earbud
is not sto re d inside the Recharging Case, press and hold the MF button for 3seconds to turn
ON.)
Press and hold the MF button of the Earbud for 6seconds to turn OFF the device. ( O r, put
the Earbud back to the Recharging Case, it will turn off for recharging automatically.)
Pairing either one Bluetooth Earbud with Bluetooth devices (phone or tablet that
support call-answering)
•Take out one Earbud from the Recharging Case, it will turn on automatically and the
LED flashes red and blue ( Or, if the Earbud is not st ore d inside the Re charging Case,
press and hold the MF button for 3seconds to turn ON. An indication tone will be
he ard and the LED flashes red and blue.)
•Place the Bluetooth Earbud and Bluetooth device (phone or tablet that support call
answering) no further than 1m apart from each other;
•Activate the Bluetooth function on your mobile device. Ple ase refer to the
manufacturer’s instructions for instructions on enabling Bluetooth on your device.
•Once you have activated Bluetooth on your mobile device, select the “Digi-Buds”
from the list of available Bluetooth devices.
•You might be prompted with “Pair with Digi-Buds?” message on your source device,
with “Cancel”and “OK”options. Please click “OK”.
•If re quired, enter the password ‘0000’to confirm &finalize pairing.
•Once paired successfully, an indication tone will be he ard and the LED will flash blue
slowly.
•You can now start to use the Earbud.
•If pairing is unsuccessful, turn off the device first and then re-pair following the
above steps.
•Once you have paired the Bluetooth Earbud with amobile device, the earbud will
remember this mobile device and will pair automatically whe n its Bluetooth is
activated within the range, during subsequently pairing. You do not need to re-pair
any previously connected devices.
•The Bluetooth Earbud will attempt to automatically connect to the last device it was
paired with when switched on. If you want to pair it with anew device, please follow
the steps outlined above.
Making acall with the Bluetooth Earbud in Bluetooth mode
Basic operation
Function Operation Button
Answer incoming
call
Incoming Call Short press the Phone button to answer an
incoming call.
