Soundcore VR P10 User manual
soundcore VR P10
USER MANUAL
EN 01
Download the soundcore app to enhance your experience (firmware
update, dongle switching, EQ tuning, gaming mode, and more).
Open the charging case, the earbuds will automatically power on.
Place the earbuds in the charging case and close the case, the
earbuds will power off.
• To manually power on, place both earbuds in the charging case
and leave the case open, press the button on the charging case.
• The earbuds will power off after 30 minutes if they are not
connected with Bluetooth devices or with the dongle.
1. Choose the Ear Tips that fit your ears best.
2. Insert the earbuds into the inner canal of your ears and turn gently
until you find the most comfortable and secure position.
• Fully dry off the earbuds and the USB-C charging port before
charging.
• Fully charge both the earbuds and the charging case before the
first use.
1. Place the earbuds in the charging case and close the case.
2. Connect the charging case to the power supply by using a
certified USB-C charging cable.
Open the charging case, then press and hold the button on the charging
case for 3 seconds to enter Bluetooth pairing mode. Select “soundcore VR
P10” from your device's Bluetooth menu to connect.
*During Bluetooth pairing, the connection between the earbuds and the
dongle might break temporarily.The connection of dongle will resume
when the Bluetooth pairing succeeds or when you return the earbuds in the
charging case, then close and open the case.
When the dongle is plugged into the USB-C port of your VR headset
or gaming console, the earbuds will automatically connect with it
and be ready to use.
POWERING ON/OFF
PAIRING VIA DONGLE BLUETOOTH PAIRING
APP
WEARING CHARGING
21
On Off
L
S M
1 2
1 2
10mins = 1.5hrs
8m/26ft
CONNECTED CONNECTED
CONNECTING
soundcore
VR P10
soundcore
VR P10
PAIRING
CONNECTED
10m/33ft
CONNECTED
3s
EN 02
• In the soundcore app, you can customize the controls, e.g. enable a
single tap to adjust volume.
• Controls may vary when connected via the dongle if the console's
system is incompatible.
• Adjust the volume level via the connected device or in the
soundcore app.
You need a charger that supports USB PD (Power Delivery) and has
a minimum output of 9V/2A, otherwise this function might not work
properly.
*No data transmission is supported. Don't try to link a PC to a VR
headset using a USB-C cable.
1. Connect the link cable from a USB-C port on your PC to your VR
headset.
2. Plug the dongle into another USB-C port on your PC to use your
soundcore earbuds.
Mono mode: You can use either one of the earbuds only by putting
the other one back into the charging case.
Stereo Mode: When in mono mode, take out the other earbud from
the charging case, the two earbuds will automatically switch to stereo
mode.
CONTROLS
PLAYING WHILE CHARGING
VR LINKING TO PC
The earbuds can connect with two devices (via dongle or Bluetooth) at the
same time.
You can only play music from one device at a time.
If you have an incoming call on the Bluetooth device, you can hear from
both connected devices at the same, but the volume on the dongle-
connected device will be lower than that on the Bluetooth device.
DUAL CONNECTION
Play / Pause Tap twice (R)
Next track Tap twice (L)
Volume up Tap once (R)
Volume down Tap once (L)
CONTROLS
Dongle
1 2
3s
soundcore
VR P10
soundcore
VR P10
Bluetooth
×2
R
×2
L
Voice
Assistant
L/R
2s2s
×2
L/R
2s2s
L/R
Dongle
2s2s
L/R
1
2
Answer a call Tap twice (L/R)
Reject / End a call Tap and hold for 2
seconds (L/R)
End a call Tap and hold for 2
seconds (L/R)
Activate Siri or other
voice assistant software
Tap and hold for 2
seconds (L/R)
(via Bluetooth)
(via Dongle)
EN 03
The dongle can be magnetically adhered to the inside of the lid of
the charging case.
You need to take out both earbuds first, then take out or store the
dongle.
DONGLE STORAGE
Reset if the earbuds have issues pairing with each other or with
other devices.
Return the earbuds in the charging case and leave the case open.
Press and hold the button on the back for 10 seconds until the
charging case LED indicator flashes red three times.
Reset if the dongle has issues pairing with the earbuds.
Plug the dongle into the USB-C port of your VR headset or gaming
console, then insert an object with a sharp tip for three seconds to
reset the dongle. Open the charging case, then press and hold the
button on the charging case for 3 seconds to pair with the dongle.
DONGLE RESET
LED LIGHT GUIDE EARBUDS RESET
<10%
>10%
PAIRING
CONNECTED CONNECTED
>10%
×3
CONNECTED
CONNECTING
×3
10s
21
3s
3s
CONNECTED
CONNECTING
CONNECTED
PAIRING
CONNECTED
1
2
SPECS
Specifications are subject to change without notice.
Input 5 V 0.5 A
Rated output power 5 V 0.4 A(0.2A per port)
Battery capacity 63mAh x 2 (earbuds);
550mAh (charging case)
Charging time 2 hours
Playtime (connected via Bluetooth) Up to 5.5 hours (Total 22 hours
with the charging case)
Playtime (connected via Dongle) Up to 6 hours (Total 24 hours
with the charging case)
Driver unit 11mm dynamic driver
Frequency response 20Hz - 20kHz
Impedance 16 Ω
Waterproof level (Earbuds) IPX4
Bluetooth version 5.2
Bluetooth range 15m / 49ft
Dongle transmitter range 6m / 19.7ft
Flashing red
Steady red
Breathing purple
Steady purple
Breathing blue
Other manuals for VR P10
1
Other Soundcore Headphones manuals
Soundcore
Soundcore Life P3i User manual
Soundcore
Soundcore Liberty Air User manual
Soundcore
Soundcore R50i User manual
Soundcore
Soundcore Liberty Air 2 Pro User manual
Soundcore
Soundcore Liberty Lite User manual
Soundcore
Soundcore Life Q30 User manual
Soundcore
Soundcore A3951 User manual
Soundcore
Soundcore Life Q20 User manual
Soundcore
Soundcore A3911 User manual
Soundcore
Soundcore Liberty Air User manual
Soundcore
Soundcore Liberty 3 Pro User manual
Soundcore
Soundcore Life Q20 User manual
Soundcore
Soundcore A3939 User manual
Soundcore
Soundcore Life Q10 User manual
Soundcore
Soundcore Liberty 2 Pro User manual
Soundcore
Soundcore Strike 3 User manual
Soundcore
Soundcore Life Note User manual
Soundcore
Soundcore Life Dot 2 NC User manual
Soundcore
Soundcore Liberty 2 Pro User manual
Soundcore
Soundcore Space Q45 User manual
