Soundcore Life A1 User manual
Soundcore Life A1
USER MANUAL
01 EN
Charging
• Fully dry off the earbuds and the USB port before charging.
• Use a certied USB-C charging cable and charger to prevent any damage.
• Fully charge both the earbuds and the charging case before the rst use.
1. Place the earbuds in the charging case and close it.
2. Connect the charging case to the power supply by using a USB-C charging cable.
Alternatively, position the charging case at the center of your wireless charger for
wireless charging.
The LED indicators on the charging case indicate the charging status.
> 70%
30% - 70%
< 30%
100%
2
1
or
Wearing
1. Choose the EarTips and EarWings that t your ears best.
2. Insert the earbuds into the inner canal of your ears and turn gently until you nd
the most comfortable and secure position.
EN 02
Your earbuds come with multiple pairs of EarTips and EarWings, among which
Medium-sized are pre-installed.
Powering On/Off
The earbuds will automatically power on when taken out of the charging case.
The LED indicator on earbuds will light up white for 1 second.
To power off, place the earbuds in the charging case.
ON OFF
• The earbuds will automatically power off after 2 minutes if no device is
connected.
• To manually power on, press and hold the multi-function button on both
earbuds for 1 second until the LED indicator turns white for 1 second.
• To manually power off, press and hold the multi-function button on either
earbud for 8 seconds until the LED indicator turns red for 1 second.
03 EN
Bluetooth Pairing
1. Take the earbuds out of the charging case, the earbuds will automatically enter
the Bluetooth pairing mode.
The LED indicator on one earbud will ash white.
2. Select “Soundcore Life A1” on your device’s Bluetooth list to connect.
When successfully connected, the LED indicator on earbuds will ash white once
every 5 seconds.
1
2
Soundcore
Life A1
Soundcore
Life A1
1s
• When earbuds are out of the charging case and powered off, to manually enter
Bluetooth pairing mode, press and hold the multi-function button on both
earbuds for 3 seconds.
• Each time you power on your Soundcore earbuds, they will automatically
connect to your last successfully connected device if available within the
Bluetooth range.
• Mono mode: When Bluetooth connected, you can use either one of the earbuds
only by placing the other one into the charging case.
• When powered on and connected, if either one of the earbuds is out of battery
and powered off, you can keep using the other one.
• When you are on a call, place either one of the earbuds into the charging case,
the microphone in the other earbud will be activated.
• The right earbud is the primary earbud by default. If you want to change this,
remove the right earbud from your ear and place in the charging case, the
microphone in the other earbud will be activated and become the primary
earbud.
EN 04
Controls
Play/Pause Press twice (R)
Next track Press twice (L)
Adjust volume Press once (L/R)
Adjust EQ settings
(Soundcore Signature/Bass Booster/Acoustic) Press three times (L/R)
Answer/End a call
Press once (L/R)
Answer a second incoming call and put the
current call on hold
Reject a call
Press and hold for 1 second (L/R)
Transfer a call between earbuds and mobile
phone
Switch between a call on hold and an active call
Activate Siri or other voice assistant software Press and hold for 1 second (L/R)
Mono mode
Play/Pause Press twice
Answer/End a call Press once
Reject a call Press and hold for 1 second
Activate Siri or other voice assistant software
Reset
You might need to reset your earbuds if you experience any connectivity problems
or function issues.
1. Place the earbuds in the charging case and make sure they are being charged.
2. Press and hold the button on both earbuds for 8 seconds until the earbud LED
indicators ash red for 3 times.
05 EN
3. Take the earbuds out of the charging case and wait until the LED indicator on one
of the earbuds flashes fast while the other breathes slowly. This confirms that the
reset was successful and your earbuds can be connected normally.
x3 x3
8s
Specifications
Specications are subject to change without notice.
Input 5 V 0.7 A
Rated output power 5 mW @ 1% THD
Battery capacity 85 mAh x 2 (earbuds);
770 mAh (charging case)
Charging time 2 hours
Playtime
(varies by volume level and content)
Up to 9 hours
(Total 35 hours with the charging case)
Driver size 8 mm x 2
Frequency response 20 Hz - 20 kHz
Impedance 16 Ω
Waterproof level IPX7
Bluetooth version V 5.0
Bluetooth range 10 m / 33 ft
Table of contents
Other Soundcore Headphones manuals
Soundcore
Soundcore Spirit Pro User manual
Soundcore
Soundcore Life Note User manual
Soundcore
Soundcore Life Note C User manual
Soundcore
Soundcore Life A3i User manual
Soundcore
Soundcore A3911 User manual
Soundcore
Soundcore Liberty Neo 2 User manual
Soundcore
Soundcore Life P2 Mini User manual
Soundcore
Soundcore Liberty 2 User manual
Soundcore
Soundcore Life Note 3S User manual
Soundcore
Soundcore A3939 User manual
Soundcore
Soundcore Life Note User manual
Soundcore
Soundcore Space Q45 User manual
Soundcore
Soundcore Life Q35 User manual
Soundcore
Soundcore Liberty 2 Pro User manual
Soundcore
Soundcore Q20i User manual
Soundcore
Soundcore Liberty 2 User manual
Soundcore
Soundcore Life Q20 User manual
Soundcore
Soundcore Spirit X2 User manual
Soundcore
Soundcore Space NC A3021 User manual
Soundcore
Soundcore Space A40 User manual
