Sony TMR-BT10A User manual

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Portable Stereo

Transmitter

3-280-223-11(1)

TMR-BT10A

Operating Instructions

Manual de instrucciones ES

01US00COV+U2.p65 8/8/07, 1:26 pm1

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

WARNING

To reduce the risk of fire or electric

shock, do not expose this

apparatus to rain or moisture.

To reduce the risk of electrical

shock, do not open the cabinet.

Refer servicing to qualified

personnel only.

Do not install the appliance in a confined

space, such as a bookcase or built-in

cabinet.

To reduce the risk of fire, do not cover the

ventilation of the apparatus with

newspapers, tablecloths, curtains, etc.

And do not place lighted candles on the

apparatus.

To reduce the risk of fire or electric

shock, do not place objects filled with

liquids, such as vases, on the apparatus.

Connect the AC power adaptor to an

easily accessible AC outlet. Should you

notice an abnormality in the AC power

adaptor, disconnect it from the AC outlet

immediately.

Do not expose the battery to excessive

heat such as direct sunlight, fire or the

like.

For the customers in the USA

Owner’s Record

The model number is located at the side

of the unit, and the serial number is

located inside the holding clip.

Record these numbers in the spaces

provided below. Refer to them whenever

you call upon your Sony dealer regarding

this product.

Model No. TMR-BT10A

Serial No.

Information

This device complies with Part 15 of FCC

Rules.

Operation is subject to the following two

conditions: (1) this device may not cause

interference, and (2) this device must

accept any interference, including

interference that may cause undesired

operation of this device.

You are cautioned that any changes or

modifications not expressly approved in

this manual could void your authority to

operate this equipment.

This equipment must not be co-located or

operated in conjunction with any other

antenna or transmitter.

This equipment complies with FCC

radiation exposure limits set forth for

uncontrolled equipment and meets the

FCC radio frequency (RF) Exposure

Guidelines in Supplement C to OET65.

This equipment has very low levels of RF

energy that it is deemed to comply

without testing of specific absorption ratio

(SAR).

The Bluetooth word mark and logos are

owned by the Bluetooth SIG, Inc. and any

use of such marks by Sony Corporation is

under license.

Other trademarks and trade names are

those of their respective owners.

01US01TOC+U2.p65 8/8/07, 1:26 pm2

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Table Of Contents

What is Bluetooth wireless

technology? .................. 4

Welcome! .......................... 5

3 steps to Bluetooth function .... 6

Location and Function of

Parts............................... 7

Charging the unit ............. 8

Pairing ............................. 10

What is pairing? ...................... 10

Procedures of pairing .............. 10

Indications of

Bluetooth

function

...... 12

Listening to music ......... 13

Disposing of the unit ..... 15

Precautions .................... 16

Troubleshooting ............. 18

Initializing the unit ......... 20

Specifications ................. 21

RECYCLING LITHIUM-ION

BATTERIES

Lithium-Ion batteries are recyclable.

You can help preserve our environment

by returning your used rechargeable

batteries to the

collection and recycling

location nearest you.

For more information

regarding recycling of

rechargeable batteries,

call toll free 1-800-822-

8837, or visit

http://www.rbrc.org/

Caution: Do not handle damaged or

leaking Lithium-Ion batteries.

01US01TOC+U2.p65 8/8/07, 1:27 pm3

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

What is Bluetooth wireless

technology?

BluetoothTM wireless technology is a

short-range wireless technology that

enables wireless data

communication between digital

devices, such as a computer or

digital camera. Bluetooth wireless

technology operates within a range

of about 10 m (about 30 ft).

Connecting two devices as

necessary is common, but some

devices can be connected to

multiple devices at the same time.*

You do not need to use a cable for

connection, nor is it necessary for

the devices to face one another, such

is the case with infrared technology.

For example, you can use such a

device in a bag or pocket.

Bluetooth standard is an

international standard supported by

thousands of companies all over the

world, and employed by various

companies worldwide.

*This unit cannot be connected to

multiple devices at the same time.

Communication System

and Compatible Bluetooth

Profiles of this unit

Profile is standardization of the

function for each Bluetooth device

specification. This unit supports the

following Bluetooth version and

profile:

Communication System:

Bluetooth Specification version 2.0

Compatible Bluetooth Profile:

–A2DP (Advanced Audio Distribution

Profile)

01US02FEA+U2.p65 8/8/07, 1:27 pm4

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Welcome!

Thank you for purchasing this Sony Portable Stereo Transmitter. This unit

uses Bluetooth wireless technology.

•Wireless transmitter for streaming of high-quality stereo music from

digital music player.

•Transmits music to other devices using Bluetooth wireless technology.*

•Useful rechargeable function.

*The connected Bluetooth device is required to support A2DP (Advanced Audio

Distribution Profile).

Enjoy listening to music

01US02FEA+U2.p65 8/8/07, 1:27 pm5

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

3 steps to Bluetooth function

In the example below, we explain how to transmit music played on your

audio device connected to this unit and listen to music on a Bluetooth stereo

audio receiving device (headphone, stereo audio system, etc.).

Pairing

Enables a Bluetooth stereo audio receiving device and this unit to

recognize one another.

Bluetooth connection

Turning on this unit

automatically makes the

Bluetooth connection

between this unit and the

Bluetooth stereo audio

receiving device.

Transmitting music

You can enjoy listening to

music played on the portable

audio player, etc., connected

to this unit through the

Bluetooth audio receiving

system.

Portable Stereo

Transmitter

Connection

Pairing

Stereo audio

signal

(Streaming)

Audio

device

For more details, see pages 10 - 11.

For more details, see page 13 - 14.

Bluetooth stereo audio

receiving device

01US02FEA+U2.p65 8/8/07, 1:27 pm6

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Location and Function of Parts

GETTING STARTED

1Initialize button

2Indicator (red)

Indicates the power status of

the unit.

3Indicator (blue)

Indicates the communication

status of the unit.

4POWER button

5Audio in plug (Gold-

plated L-shaped stereo

mini plug)

Connects to the headphone

jack of a portable audio

player, etc.

6RESET button

Press when the unit becomes

inoperative.

Pairing information is not

deleted by this operation.

7Holding clip

Adjust the holding clip to the

desired angle and clip to your

bag.

8Terminal for the battery

charging stand

01US03GET+U2.p65 8/8/07, 1:27 pm7

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

1Connect the supplied

AC power adaptor with

the battery charging

stand.

2Connect the supplied

AC power adaptor to an

AC outlet.

Charging the unit

The unit contains a rechargeable Lithium-Ion battery, which should be

charged before using for the first time.

Battery charging

stand (supplied) (Rear)

AC power

adaptor

(supplied)

3Put the unit on the

battery charging stand.

Note

If the holding clip is turned, the unit

cannot be set on the battery charging

stand and charging does not start.

Turn the holding clip back to the

original position before charging.

Rest the unit on the battery

charging stand so that the unit’s

terminal for the battery charging

stand meets the contact pin on

the battery charging stand, and

make sure that the indicator

(red) lights up.

Charging is completed in

about 3 hours* and the

indicator (red) goes off

automatically.

*Time required for empty battery

to recharge.

Tip

When charging the battery, the unit is

turned off automatically.

To an AC

outlet

Portable Stereo

Transmitter

Contact pin

Battery charging

stand (supplied)

01US03GET+U2.p65 8/8/07, 1:27 pm8

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Status

Full

Mid

Low

(needs to

charge)

Approx.

usage hours

11 hours

Checking the remaining

battery

When pressing the POWER button

while the unit is turned on, the

indicator (red) flashes. You can

check the remaining battery by the

number of times the indicator (red)

flashes.

Indicator (red)

3 times

2 times

1 time

Note

You cannot check the remaining battery

immediately after the unit is turned on, or

during the procedure for pairing.

When the battery is almost empty

The indicator (red) flashes slowly

automatically.

When the battery becomes empty, the unit

will turn off automatically.

Caution

If this unit detects a problem while

charging, the indicator (red) may

turn off, although charging is not

complete.

Check for the following causes:

–Ambient temperature exceeds the range

of 0 °C – 40 °C (32 °F – 104 °F).

–There is a problem with the battery.

In this case, charge again within the

above-mentioned temperature range.

If the problem persists, consult your

nearest Sony dealer.

Notes

•If the battery is not used for a long time,

battery may be quickly depleted,

however, after a few recharges, battery

life will improve.

•If the life of the built-in rechargeable

battery drops to half the normal length,

the battery should be replaced. Consult

your nearest Sony dealer for

replacement of the rechargeable battery.

•Avoid exposure to temperature

extremes, direct sunlight, moisture,

sand, dust or mechanical shock. Never

leave in a car parked in the sun.

•Use only the supplied AC power

adaptor. Do not use any other AC

power adaptor.

Usage hours*

Status

Music playback

time (up to)

*Time stated above may vary, depending

on ambient temperature or conditions of

use.

01US03GET+U2.p65 8/8/07, 1:27 pm9

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Pairing

What is pairing?

Bluetooth devices need to be

“paired” with each other beforehand.

Once Bluetooth devices are paired,

there is no need for pairing again,

except in the following cases:

•When pairing information is

deleted after repair, etc.

•When this unit is paired with 9 or

more devices.

This unit can be paired with 8

Bluetooth devices; if a new device

is paired after 8 devices have been

paired, the device whose latest

connection time is the oldest

among the 8 paired devices is

replaced by the new one.

•When recognition of the unit by

the device to be connected is

deleted.

•When this unit is initialized

(page 20).

All pairing information is deleted.

Note

Passcode* of this unit is fixed at “0000.”

This unit cannot be paired with a

Bluetooth receiving device whose

Passcode is not “0000.”

*Passcode may be called “Passkey,”

“PIN code,” “PIN number,” or

“Password.”

Procedures of pairing

1Place a Bluetooth

receiving device within

1 m (3 ft) of this unit.

Press and hold the

POWER button for 7

seconds or more to

standby for pairing while

the unit is turned off.

The indicator (blue) and the

indicator (red) start flashing

together and this unit starts

searching the Bluetooth

receiving device.

Notes

•After about 3 seconds, power is

turned on and the indicator

(blue) and indicator (red) flash

together twice. Keep the button

pressed without releasing until

both indicators start flashing

together, then release the button.

This unit enters into pairing

mode.

•

If pairing is not established

within about 5 minutes, pairing

mode will be canceled and this

unit will turn off. In this case,

start over from step 1.

01US03GET+U2.p65 8/8/07, 1:27 pm10

Table of contents

Languages:

Other Sony Transmitter manuals

Sony

Sony TMR-RF940R User manual

Sony

Sony WRT-8P User manual

Sony

Sony DWT-B03R User manual

Sony

Sony TMR-IF330R User manual

Sony

Sony WLL-CA50 User manual

Sony

Sony TMR-BT8iP - Bluetooth Wireless Transmitter User manual

Sony

Sony DWT-P01N User manual

Sony

Sony WLA-NS7 Reference guide

Sony

Sony WRT-822A User manual

Sony

Sony DCC-FMT50U User manual

Sony

Sony TMR-BT8iP - Bluetooth Wireless Transmitter User manual

Sony

Sony DWT-B01N User manual

Sony

Sony WRT-847A User manual

Sony

Sony AIR-PC10T Operating Instructions (AIR-PC10T) User manual

Sony

Sony TMR-PJ1 User manual

Sony

Sony DWT-B30 User manual

Sony

Sony DWT-P01 User manual

Sony

Sony WRT-860A User manual

Sony

Sony AIR-SA17Ti Marketing User manual

Sony

Sony WRT-822B User manual

Sony

Sony DWT-P30 User manual

Sony

Sony DCCFMT50UD - Car FM Stereo Transmitter User manual

Sony

Sony WRT-805A User manual

Sony

Sony UTX-B03HR User manual

Popular Transmitter manuals by other brands

NIVELCO

NIVELCO EasyTREK SCA-300 Series Programming manual

Honeywell

Honeywell 5816WMBR installation instructions

Kamstrup

Kamstrup READy MTU Installation and operation guide

Omega

Omega ZW Series user guide

ABB

ABB Field 264H Instructions for installation

Alinco

Alinco DJ-V17T Service manual

Dejero

Dejero EnGo 3x manual

Rosemount

Rosemount 4600 Reference manual

Speaka Professional

Speaka Professional 2342740 operating instructions

trubomat

trubomat GAB 1000 instruction manual

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 instructions

Rondish

Rondish UT-11 quick start guide

MG 10JRE instruction manual

Burkert

Burkert 8177 operating instructions

Firetide

Firetide HotPort 3203 Hardware installation guide

Tele Radio

Tele Radio T9-02 User instructions

Rotronic

Rotronic HygroFlex HF3 Series user guide

Jamara

Jamara FCX6 Pro Tel Instruction