Sony CCP-8000 Series User manual
SYSTEM SETUP MANUAL
1st Edition
MULTI FORMAT SWITCHER SYSTEM
MVS-8000 System
MVS-8400/8300/8200
SWITCHER PROCESSOR PACK
MVE-8000
DME PROCESSOR PACK
DCU-8000
DEVICE CONTROL UNIT PACK
CCP-8000
CENTER CONTROL PANEL PACK
MVS-8000 System
SYSTEM SETUP
!WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
!WARNUNG
Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
!AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l'entretien. Afin de
réduire les risques de décharge électrique, d'incendie ou de blessure n'effectuer que les
réparations indiquées dans le mode d'emploi à moins d'être qualifié pour en effectuer d'autres.
Pour toute réparation faire appel à une personne compétente uniquement.
1
MVS-8000 System
SYSTEM SETUP
Table of Contents
1. System Overview
1-1. Introduction .................................................................................................1-1
1-2. Features .......................................................................................................1-1
1-3. System Description .....................................................................................1-2
1-3-1. MVS-8000..................................................................................1-3
1-3-2. MVE-8000..................................................................................1-9
1-3-3. CCP-8000 .................................................................................1-13
1-3-4. DCU-8000 ................................................................................1-21
1-4. MVS-8000 System Example.....................................................................1-24
1-5. Functional Overview .................................................................................1-25
1-5-1. Video Signal Flow....................................................................1-25
2. Installation
2-1. Installation Tasks ........................................................................................2-1
2-2. MVS-8000 Installation................................................................................2-2
2-2-1. Rack Mounting ...........................................................................2-2
2-3. MVE-8000 Installation................................................................................2-4
2-3-1. Rack Mounting ...........................................................................2-4
2-4. CCP-8000 Installation .................................................................................2-6
2-4-1. Installation Space .......................................................................2-6
2-4-2. Installing the Main Panel ...........................................................2-8
2-4-3. Installing the AUX Panel ...........................................................2-9
2-4-4. Installing the Menu Panel...........................................................2-9
2-4-5. Rack Mounting .........................................................................2-10
2-5. DCU-8000 Installation ..............................................................................2-13
2-5-1. Rack Mounting .........................................................................2-13
2-6. MVS-8000 System Video Cabling............................................................2-15
2-7. MVS-8000 System Control Cabling .........................................................2-16
2-7-1. Cabling .....................................................................................2-16
2-7-2. LAN Requirements ..................................................................2-18
2-8. CCP-8000 Panel Cabling ..........................................................................2-19
2-8-1. Connecting the MKS-8075/MKS-8076 ...................................2-22
2MVS-8000 System
SYSTEM SETUP
3. Configuration
3-1. Introduction .................................................................................................3-1
3-2. Basic Configuration Steps...........................................................................3-1
3-3. IP Address ...................................................................................................3-2
3-3-1. Default IP Address .....................................................................3-3
3-3-2. Changing IP Address..................................................................3-4
3-4. Ethernet Switch Settings .............................................................................3-5
3-5. Software Installation ...................................................................................3-9
3-6. Engineering Setups......................................................................................3-9
3-7. Tally Setup ................................................................................................3-10
3-7-1. Setting Router...........................................................................3-12
3-7-2. Setting Group Tally ..................................................................3-24
3-7-3. Setting Wiring ..........................................................................3-26
3-7-4. Setting Tally Enable .................................................................3-29
3-7-5. Setting Tally Copy ...................................................................3-32
3-7-6. Setting Parallel Tally ................................................................3-35
3-7-7. Setting Serial Tally...................................................................3-37
3-8. Pin Output .................................................................................................3-41
3-8-1. MVS-8000................................................................................3-41
3-8-2. MVE-8000................................................................................3-43
3-8-3. CCP-8000 ................................................................................. 3-44
3-8-4. DCU-8000 ................................................................................3-46
4. Specifications
4-1. MVS-8000...................................................................................................4-1
4-2. MVE-8000...................................................................................................4-9
4-3. DCU-8000 .................................................................................................4-11
4-4. CCP-8000 ..................................................................................................4-13
1-1
MVS-8000 System
SYSTEM SETUP
Section 1
System Overview
1-1. Introduction
The MVS-8000 system has integrated a wide variety of new features including SDTV and HDTV televi-
sion signal capability, advanced networking and layout-free control panels.
The MVS-8000 system includes SD/HD simulcast, multiple frame rates and resolutions, multi-channel
casting and even broadcast equipment sharing, to name just a few.
The MVS-8000 system is completely ready for smooth integration into current systems, offering the
added quality, reliability and features, needed for the live/post production environment.
The MVS series can be flexibly expanded as a user’s needs grow simply installing the appropriate options
to the basic system.
1-2. Features
Flexible configurations
Item Expandable number Expansion basis
M/E configuration 2 M/E Per M/E
3 M/E
4 M/E
Inputs SD: up to 80 inputs Per 17 inputs
HD: up to 68 inputs
Outputs 56 assignable outputs Per 8 outputs
(including 8 monitor outputs)
DME Channel 1 to 8 CH Per 1 CH
(4 CH in one chassis)
SD/HD capability
High definition Standard definition
1080i/60/59.94/50 480i/59.94
1080PsF/30/29.97/25/24/23.976 576i/50
720p/59.94 (future)
1-2 MVS-8000 System
SYSTEM SETUP
1-3. System Description
The MVS-8000 System consists of Switcher Processor Pack (MVS-8400/8300/8200), DME Processor
Pack (MVE-8000), Center Control Panel Pack (CCP-8000) and Device Control Unit Pack (DCU-8000).
1-3. System Description
MVE-8000
DCU-8000
MVS-8400/8300/8200
AUX PANEL
MENU PANEL
MIAN PANEL
POWERA
SYSTEM CONTROL UNIT MKS-8010
MKS-8010
CCP-8000
1-3
MVS-8000 System
SYSTEM SETUP
1-3-1. MVS-8000
The MVS-8000 is a 16 rack unit chassis which can be mounted in the standard 483 mm (19 inch) rack.
External dimensions of MVS-8000
577.9
400.1
177.8
65.1
375
708(16U)
465
482
440
35 27
61 380
520
1-3. System Description
Unit : mm
1-4 MVS-8000 System
SYSTEM SETUP
n
The MVS-8000 has a built-in cooling system consisting of eighteen fans in total fan mounted on the rear
and both sides of the frame, and an air filter on the rear of the front panel. Cooling air is drawn in at the
front side of the frame, through the filter, boards, and modules, and then expelled out the rear and both
sides of the frame at the fan unit.
If dust is accumulated at the intake of the fan or the cables doesn't keep off over 10 cm from the fans, air
is prevented from flowing smoothly that result in rise of temperature inside the machine. It may result in
adverse effects on performance and life of the machine.
Fans Fans
Fans
Fans
Fans
Fans
1-3. System Description
MVS-8000
Multi Format Switcher Processor
<Rear Side>
1-5
MVS-8000 System
SYSTEM SETUP
The MVS-8000 has the slots for plug-in boards in its front and rear. It contains of 32 slots in total for
standard/option boards.
n
The MVS-8000 is shown below with the front panel removed. The front panel must remain in place and
closed during normal system operation to keep maximum cooling efficiency.
3
2
1
32
Slots on
the front side
1-3. System Description
MVS-8000
Multi Format Switcher Processor
1-6 MVS-8000 System
SYSTEM SETUP
1-3. System Description
Power, control, and video connectors are at the rear chassis of MVS-8000. The illustration below shows a
full loaded rear board. Some of the modules shown below are optional and may not be included in your
system configuration.
GPI connector
TERMINAL connector
REMOTE 1 to 4 connectors
AC IN A, B, C, and
D connectors
terminal
REF INPUT connectors
REF OUTPUT connectors
EXT connector
DATA connector
CTRL connector
DME 1A, 1B, 2A, 2B connectors
PRIMARY INPUTS
69 to 80 connectors
MONITOR OUTPUTS
49 to 56 connectors
PRIMARY INPUTS
1 to 68 connectors
OUTPUTS 1 to 48 connectors
MVS-8000
Multi Format Switcher Processor
Other manuals for CCP-8000 Series
3
This manual suits for next models
6
Table of contents
Other Sony Switch manuals
Sony
Sony XA-C30 - 2 Output Selector User manual
Sony
Sony XVS-G1 User manual
Sony
Sony HDS-7150 User manual
Sony
Sony BZPS-8001 User manual
Sony
Sony DVS-7200A User manual
Sony
Sony DVS-7150 User manual
Sony
Sony MVS -8000X User manual
Sony
Sony BKPF-R70 User manual
Sony
Sony MVS-8000G-C Quick start guide
Sony
Sony HDS-X3700 User manual
