Sony PT-1155-IR10 User manual

Installation Guide

PT-1155-IR10

Content of box:

1 x Touch overlay

3 x Brackets

13 x Phillips screws

Table of Contents

Introduction 2

Capabilities 3

Unpacking the Unit 4

Installation Instructions 5 - 6

USB Installation 7

Operating the Touch Screen 8

Cleaning the Touch Screen 9

Troubleshooting 9 -11

Speciﬁcations 12

Terminology

Monitor: refers to the Sony FWL-55W805C / FW-55X8570C LCD screen.

Sometimes referred to as “display screen.”

Touch overlay: refers to the PresTop overlay that ﬁts onto the monitor and

provides the touch functionality.

Touch screen: refers to the combined unit—the monitor and the touch overlay.

Introduction

Congratulations on your purchase of a PresTop PT Touch Overlay. This product turns a

Sony FWL-55W805C / FW-55X8570C large-format display, into an interactive display.

You can control a computer application simply by touching the screen.

The PT Touch Overlay can be connected to the computer via USB cable, thus providing

maximum versatility. The USB is HID compliant, providing true plug-and-play operation,

just like a USB mouse.

The standard PT Touch Overlay is powered via the USB interface from the computer and

hence does not require a separate power supply.

The main steps to install the PT Touch Overlay are as follows:

• Unpack the PT Touch Overlay.

• Unpack the screen.

• Fit the touch overlay to the display screen.

• Connect all the cables.

Touch service Software Suite

For USB communications, you do not need to install any software. However, an optional

USB Conﬁguration program that allows you to change various default settings is

available in the Touch service software suite.

Touch service software can be downloaded from http://prestopproducts.com/support/.

Once installed, this program is available from the Start / Programs / Touchservice.

Capabilities

The following table shows the touch functionality provided by a PresTop PT touch over-

lay with diﬀerent operating systems.

1) Windows must be non OEM version.

2) Kernal 3.0+, csn support multitouch by adding patch.

Kernal 3.5+, HID compliance support multitouch.

3) Gesture support on request.

4) Kernal 2.6.32+, we can provide patch

Kernal 3.5+, HID compliance support Multi-touch

Multi-Touch and Gestures on Windows 7, 8, 10

The latest operating systems from Microsoft and other vendors support multi-touch

features such as two-touch gestures. The PresTop PT touch overlay is multi-touch

capable and supports gestures.

Unpacking the Unit

Unpack the unit, taking care not to damage the surfaces. Check the product for any

signs of damage in transit.

Installation Requirements

Once you have unpacked the unit, make sure you have the following:

• The display monitor that you are going to mount the touch overlay onto.

• The computer that runs your software application, including the cable that

connects the computer to the display screen.

Safety Notes

• The touch overlay contains glass that can add signiﬁcant weight, especially

for large-format displays. It is essential that the monitor’s stand is strong and

stable enough to support the combined weight of the touch overlay and

monitor.

• For a large screen, you need two people to install the touch overlay safely.

Parts of the Touch Overlay

The PresTop PT Touch Overlay consists of metal frame, in this frame is the touch and

glass.

The overlay is secured with brackets on the monitor, which are screwed in the frame.

Installation Instructions

Depending on the size the installation normally requires two people.

Preparation

1. After unpacking and checking for any damage, place the touch overlay

face down on a clean, soft surface, such as a clean carpet.

2. Make sure the back surface of the glass is clean.

(See for instructions page 9).

3. Unpack the monitor.

4. Make sure that the monitor is clean.

Installing on the monitor

1. Unpack the touch overlay and place this, face down, on a ﬂat and clean

soft surface.

2. Remove the indicated Philips screws, so the three brackets will come loose,

and take these brackets of the overlay.

4. Place the monitor gently in the touch overlay with 2 persons.

5. Attach the brackets that hold the monitor in place to the touch overlay with

the Philips screws.

Connecting Cables and Switching On

Connect the cables and switch on power in the following order:

1. Connect the video cable from the computer to the monitor.

2. Connect power to the monitor and switch on.

3. Connect power to the computer and switch on.

USB Installation

USB installations require no special software; the touch overlay communicates directly with

the computer’s operating system via the USB interface, just like a USB mouse.

Connect the USB cable from the touch overlay to the computer.

Once the cable is connected, the computer automatically detects the USB device (the

touch overlay). This takes a few seconds.

(Note: the computer only displays the above message the ﬁrst time you plug in the USB

cable. The next time you plug in the cable, the computer will be already conﬁgured for the

device.)

For USB communications, you do not need to install any software. However, an optional

USB Conﬁguration program is available that allows you to change the default operating

parameters if required.

USB Calibration

1. Click Start and then Control Panel, and next Hardware and Sound.

2. Under Tablet PC Settings, tap Calibrate.

3. Follow the on-screen instruction to calibrate your touch screen.

There is also a calibration option in the touch service software.

Calibration notes

• When removing your ﬁnger, lift it straight oﬀ the screen, making sure you don’t drag

it across the screen.

• You can exit calibration mode by pressing the calibrate button again or by pressing

the [Scroll Lock] key twice.

• Test the calibration by moving the mouse pointer around the screen checking that it

closely follows your ﬁnger. If the calibration is not satisfactory, you can re-calibrate.

Operating the Touch Screen

Mouse actions

PresTop PT Touch Overlay provides full mouse functionality—click, drag, double-click and

right-click.

• Single click is performed by tapping you ﬁnger once on the screen.

• Double click is performed by tapping your ﬁnger twice on the screen in quick

succession.

• Drag is performed by touching and moving your ﬁnger across the screen without

lifting oﬀ.

• Right click is performed by touching and holding your ﬁnger in one position for a

short time.

Operating notes

The touch screen does not require pressure to sense a touch.

For best results, point at roughly right angles to the screen and keep the rest of your hand

clear of the glass.

When removing your ﬁnger, lift it straight oﬀ the screen, making sure you don’t drag it

across the screen.

Cleaning the Touch Screen

To clean the touch screen, use a lint-free, soft cloth dampened with standard, household

glass cleaning solution as follows:

1. Spray a small amount of glass cleaner onto the cloth.

2. Wipe the glass of the touch screen to remove any dirt, dust, or ﬁnger marks.

3. Wipe the clear surfaces around the edges of the screen.

4. Remove any residual glass cleaner with a dry, soft, lint-free cloth.

WARNING:

Do not spray the cleaner directly onto the touch screen as this could leave residue on the

infrared surfaces.

Do not use an abrasive cleaner or rough cloth as this could damage the infrared.

Troubleshooting

This section provides some solutions to possible problems that might occur with the touch

screen.

If the problem persists, contact your PresTop product support provider for further advice.

Touch screen does not respond to touches

Make sure the communications cable (USB) is connected to the computer.

Make sure the touch screen is connected to a USB port that provides enough power for

it (some peripherals, such as keyboards, include USB ports that do not provide suﬃcient

power for certain devices). Try connecting the touch screen to a diﬀerent USB port on the

computer.

Cursor does not accurately follow your nger

This can occur if the touch overlay has not been calibrated correctly. To ﬁx the problem,

re-calibrate the touch overlay—see the relevant sections on calibration in this manual.

Table of contents

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

NEC

NEC AccuSync LCD5V user manual

Emay

Emay SleepO2 user manual

IBM

IBM 6360 Product support manual