Sony CSS-TNA User manual
2-634-266-11 (1)
Cyber-shot Station
2005 Sony Corporation
CSS-TNA
Operating Instructions GB
FR
Mode d’emploi
2-GB
English
Before operating the product, please read this manual thoroughly and retain it for future reference.
WARNING
To prevent fire or shock hazard, do not expose the unit to
rain or moisture.
For Customers in the U.S.A.
This symbol is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying the
appliance.
If you have any questions about this product, you may call:
Sony Customer Information Services Center 1-800-222-SONY (7669)
The number below is for the FCC related matters only.
Regulatory Information
Declaration of Conformity
Trade Name: SONY
Model No.: CSS-TNA
Responsible Party: Sony Electronics Inc.
Address: 16450 W. Bernardo Dr, San Diego, CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
3-GB
CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual could
void your authority to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
–Consult the dealer or an experienced radio/TV technician for help.
The supplied interface cable must be used with the equipment in order to comply with the limits
for a digital device pursuant to Subpart B of Part 15 of FCC Rules.
Notice on the supplied AC Adaptor for customers in the
United Kingdom
A moulded plug complying with BS1363 is fitted to this equipment for your safety and
convenience.
Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied
one and approved by ASTA or BSI to BS1362, (i.e., marked with or mark) must be used.
If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse
cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the
fuse cover, please contact your nearest Sony service station.
For Customers in Europe
This product has been tested and found compliant with the limits sets out in the EMC Directive for
using connection cables shorter than 3 meters (9.8 feet).
Attention
The electromagnetic field at the specific frequencies may influence the picture and sound of the
camera used with this Cyber-shot Station.
Notice
If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart
the application or disconnect and connect the communication cable (USB, etc.) again.
4-GB
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European
countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall
not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of
this product. The recycling of materials will help to conserve natural resources.
For more detailed information about recycling of this product, please contact
your local Civic Office, your household waste disposal service or the shop
where you purchased the product.
5-GB
Table of contents
Notes on using the Cyber-shot Station ............................................................................ 6
Features ................................................................................................................................ 7
Trademarks .......................................................................................................................... 7
Identifying the parts ...........................................................................................................8
Set up .................................................................................................................................... 9
Placing the camera on the Cyber-shot Station .............................................................. 10
Removing the camera from the Cyber-shot Station .................................................... 10
Charging the battery pack ................................................................................................ 11
Viewing images on a TV screen ...................................................................................... 12
Slide Show ......................................................................................................................... 12
Printing still images ......................................................................................................... 13
Connecting the camera to your computer via the Cyber-shot Station ..................... 14
Care and maintenance ..................................................................................................... 14
Changing the battery of the Remote Control ............................................................... 14
Troubleshooting ................................................................................................................ 15
Specifications ..................................................................................................................... 17
6-GB
Notes on using the Cyber-shot Station
Refer to the operating instructions for your camera as well as this manual.
The Cyber-shot Station is not a dust-proofed, moist-proofed, or water proofed product.
About the Adaptor plate:
•Three types of Adaptor plates are included with the Cyber-shot Station. By changing the
Adaptor plates, the Cyber-shot Station allows you to attach three types of cameras.
•Be sure to attach the designated Adaptor plate before using the Cyber-shot Station, or it may
damage the multi connector.
•All the Cyber-shot Station images illustrate the Adaptor plate for DSC-N1.
About the remote control:
• There are buttons that are only compatible with the DSC-N1 digital still camera on the supplied
remote control.
For DSC-N1 users:
•While the camera is set to “Housing ”, the buttons on the remote control operates different
from the normal functions. For further details, refer to the operating instructions supplied with
the camera.
Do not use or keep the Cyber-shot Station in locations subject to the following conditions:
•Locations with extremes of temperature
The temperature in closed automobiles during summer may be extremely hot, causing
deformation or malfunction of the Cyber-shot Station.
•Locations under direct sunlight or near heaters
This may cause deformation or a malfunction of the Cyber-shot Station.
•Locations subject to vibration
•Locations subject to strong magnetism
Precautions:
•Use the nearest wall outlet to get the AC Adaptor plugged in. If any malfunctions occur using
the product, unplug the AC Adaptor to cut off the power source.
•The set is not disconnected from the AC power source (mains) as long as it is connected to the
wall outlet, even if the set itself has been turned off.
•Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.
• Do not use the Cyber-shot Station in locations that are subject to strong radio waves or radiation.
Images may not be played back properly.
•Avoid other metalic objects to contact with the connecting parts of the Cyber-shot Station and
the power cord. It may cause a short circuit.
•Recording contents cannot be compensated for if playback is not possible due to damaged
“Memory Stick Duo”, a malfunction of your camera or the Cyber-shot Station, etc.
•Do not attempt to connect the supplied USB cable to the multi connector on the bottom of the
camera. It may cause a malfunction due to the damage of the multi connector.
•The screw hole on the bottom of the Cyber-shot Station is for retail display only.
Image back/Image forward buttons ( / )
These buttons are only compatible with the
DSC-N1 digital still camera.
These buttons cannot be used with other
cameras.
7-GB
Features
The CSS-TNA can be used with the DSC-N1, DSC-T9, and DSC-T5 digital still cameras.
When you place a digital still camera (here in after referred to as the “camera”) on the Cyber-shot
Station, you can use the Cyber-shot Station in the following way.
•You can easily view images on a TV screen with the wireless remote control.
Using the remote control, you can operate the followings:
–Viewing images
–Slide Show
–Playback zoom
–Trimming
•You can easily start Slide Show by only pressing the SLIDE SHOW button on the remote control
or the Cyber-shot Station.
• When the Cyber-shot Station is connected to a PictBridge enabled printer, you can easily print
still images shown on the TV by pressing the PRINT button on the remote control.
Note: If you want to print one of the still images during Slide Show playback, cancel the Slide
Show first, then press PRINT button.
•The Cyber-shot Station can charge the battery pack inside the camera faster than the battery
charger supplied with the camera.
•You can connect the Cyber-shot Station to your computer by using the supplied USB cable and
transfer image data.
Trademarks
•and “Cyber-shot Station” are trademarks of Sony Corporation.
•“Memory Stick Duo” is a trademark of Sony Corporation.
•In addition, system and product names used in this manual are, in general, trademarks or
registered trademarks of their respective developers or manufacturers. However, the TM or ®
marks are not used in all cases in this manual.
8-GB
Identifying the parts
Cyber-shot Station
Remote Control
A
d
aptor p
l
ate
POWER
l
amp
Remote sensor
CHARGE
l
amps
POWER
b
utton
(CAMERA)
Mu
l
t
i
connector
SLIDE SHOW
b
utton
DISPLAY SELECT
switch
(
USB
)
j
ac
k
A/V OUT
(
MONO
)
jack
DC IN
j
ac
k
EJECT sw
i
tc
h
SLIDE SHOW
b
utton
PRINT
b
utton
(Display / LCD on/off)
button
Image
b
ac
k/
Image
forward buttons ( / )
POWER
b
utton
(
CAMERA
)
Playback Zoom ( /) button
De
l
ete
b
utton
Contro
l
b
uttons
(v/V/b/B/ )
OSD
b
utton
(On Screen Display)
Displays Menu or Touch panel
on screen.
Compatible with DSC-N1
only.
9-GB
3Connect the AC Adaptor to the DC IN
jack of the Cyber-shot Station.
To remove the Adaptor plate
Slide the EJECT switch on the Cyber-shot
Station (1) and lift the Adaptor plate upright
(2).
To use your Cyber-shot Station abroad
- Power sources
You can use the Cyber-shot Station and the AC
Adaptor (supplied) in any country or region
where the power supply is within 100 V to
240 V AC 50/60 Hz.
Use a commercially available AC plug
adaptor, if necessary, depending on the design
of the wall outlet (wall socket).
Do not use an electronic transformer
(travel converter), as this may cause a
malfunction.
Set up
Preparing the Cyber-shot Station
Remove the caution sheet before using the
Cyber-shot Station for the first time.
1Select the Adaptor plate.
Use the Adaptor plate designated for your
camera. See the mark on the Adaptor plate
and select one as followed by the list
below.
Adaptor plate for
DSC-T5
Adaptor plate for
DSC-N1
Adaptor plate for
DSC-T9
2Attach the Adaptor plate.
Attach the Adaptor plate to the Cyber-shot
Station upright until it clicks.
–Be sure to attach the designated Adaptor
plate before using the Cyber-shot
Station.
–Using the Cyber-shot Station without
attaching the Adaptor plate may cause a
malfunction.
AC plug adaptor
(not supplied)
To a wall
outlet
(wall socket)
Cy
b
er-s
h
ot
Station
DC p
l
ug
AC A
d
aptor
AC Power cor
d
(mains lead)
10-GB
Placing the camera on
the Cyber-shot Station
Attach the camera, as refering to the image
below.
–Insert the “Memory Stick Duo” into the
camera. When you use data in the internal
memory, do not insert the “Memory Stick
Duo” into the camera.
–Be sure to turn off the camera before placing
it on or removing it from the Cyber-shot
Station.
–Make sure that the camera is securely
attached to the Cyber-shot Station.
Removing the camera
from the Cyber-shot
Station
–Hold the Cyber-shot Station down when you
remove the camera from the Cyber-shot
Station.
Insulation sheet
Preparing the remote control
Notes on the remote control
• The remote control is powered by a button
type lithium battery (CR2025) installed at the
factory. An insulation sheet is inserted to
avoid the battery exhaustion. Remove the
insulation sheet before using the remote
control for the first time.
• Point the remote sensor of the Cyber-shot
Station away from strong light sources such
as direct sunlight or overhead lightings.
Otherwise, the remote control may not
function properly.
• The remote control range is less than five
meters (for indoor use). Point the remote
control at the remote sensor of the Cyber-
shot Station. Try adjusting the angle of the
remote control if you cannot operate the
Cyber-shot Station.
Other manuals for CSS-TNA
1
Table of contents
Languages:
Other Sony Docking Station manuals
Sony
Sony RDP-M7IP User manual
Sony
Sony RDP-X60iP User manual
Sony
Sony RDP-M5iP User manual
Sony
Sony ZS-S3IPN User manual
Sony
Sony ICF-DS11IP User manual
Sony
Sony TDM-IP1 - Digital Media Port Dock User manual
Sony
Sony FST-GTK2I User manual
Sony
Sony VAIO VGP-UPR1 User manual
Sony
Sony VGP-UPR1A Quick start guide
Sony
Sony RDP-X200iP User manual
Sony
Sony RDP-X500IP User manual
Sony
Sony Walkman TDM-NW1 User manual
Sony
Sony WCH20 User manual
Sony
Sony RDP-V20iP User manual
Sony
Sony RDP-X30IP User manual
Sony
Sony Walkman BCR-NWU7 User manual
Sony
Sony RDP-X80IP User manual
Sony
Sony PSP-N340 G User manual
Sony
Sony RDP-M15iP User manual
Sony
Sony ALT-SA31iR Marketing User manual
