Sony HDC-F950 Manual
HD COLOR CAMERA
HDC-F950
HD CCD BLOCK ADAPTOR
HKC-T950
INSTALLATION AND MAINTENANCE MANUAL
1st Edition
Serial No. 10001 and Higher: HDC-F950
Serial No. 10001 and Higher: HKC-T950
HDC-F950 IMM
!WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
!WARNUNG
Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
!AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.
For HDC-F950
Laser Diode Properties
Material : In GaAsp
Wave length : 1310 nm, 1550 +4.4 nm
_7.4
Emission duration : Pulse code modulation
Laser output power : _8 dBm
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein
may result in hazardous radiation exposure.
For HDC-F950
HDC-F950 IMM 1 (P)
For HDC-F950
Vorsicht!
Explosionsgefahr bei unsachgemäßem Austausch
der Batterie.
Ersatz nur durch denselben oder einen vom
Hersteller empfohlenen ähnlichen Typ. Entsorgung
gebrauchter Batterien nach Angaben des
Herstellers.
ATTENTION
Il y a danger d’explosion s’il y a remplacement
incorrect de la batterie.
Remplacer uniquement avec une batterie du même
type ou d’un type équivalent recommandé par le
constructeur.
Mettre au rebut les batteries usagées conformément
aux instructions du fabricant.
ADVARSEL!
Lithiumbatteri-Eksplosionsfare ved fejlagtig
håndtering.
Udskiftning må kun ske med batteri
af samme fabrikat og type.
Levér det brugte batteri tilbage til leverandøren.
ADVARSEL
Lithiumbatteri - Eksplosjonsfare.
Ved utskifting benyttes kun batteri som
anbefalt av apparatfabrikanten.
Brukt batteri returneres
apparatleverandøren.
VARNING
Explosionsfara vid felaktigt batteribyte.
Använd samma batterityp eller en likvärdig typ
som rekommenderas av apparattillverkaren.
Kassera använt batteri enligt gällande
föreskrifter.
VAROITUS
Paristo voi räjähtää jos se on virheellisesti
asennettu.
Vaihda paristo ainoastaan laitevalmistajan
suosittelemaan tyyppiin.
Hävitä käytetty paristo valmistajan ohjeiden
mukaisesti.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer’s instructions.
HDC-F950 IMM
For the customers in Japan
For the customers in the Netherlands
Voor de klanten in Nederland
Hoe u de batterijen moet verwijderen, leest u in de
Onderhoudshandleiding.
Gooi de batterij niet weg maar lever deze in als klein
chemisch afval (KCA).
Für Kunden in Deutschland
Entsorgungshinweis: Bitte werfen Sie nur entladene
Batterien in die Sammelboxen beim Handel oder den
Kommunen. Entladen sind Batterien in der Regel dann,
wenn das Gerät abschaltet und signalisiert “Batterie
leer” oder nach längerer Gebrauchsdauer der Batterien
“nicht mehr einwandfrei funktioniert”. Um
sicherzugehen, kleben Sie die Batteriepole z.B. mit
einem Klebestreifen ab oder geben Sie die Batterien
einzeln in einen Plastikbeutel.
For the customers in the U.S.A. and Canada
RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are recyclable.
You can help preserve our environment
by returning your used rechargeable
batteries to the collection and recycling
location nearest you.
For more information regarding recycling of re-
chargeable batteries, call toll free
1-800-822-8837, or visit http://www.rbrc.org/
Caution: Do not handle damaged or leaking Lithium-Ion
batteries.
2 (P)
1 (E)
HDC-F950 IMM
Table of Contents
Manual Structure
Purpose of this manual ........................................................................................ 3 (E)
Related manuals................................................................................................... 3 (E)
Contents ............................................................................................................... 4 (E)
1. Installation Overview
1-1. Checking the ROM and Software Version............................................ 1-1 (E)
1-2. Connectors and Cables .......................................................................... 1-2 (E)
1-2-1. Connector Input/Output Signals ........................................... 1-2 (E)
1-2-2. Wiring Diagrams for Cables .............................................. 1-10 (E)
1-2-3. Connection Connectors/Cables .......................................... 1-11 (E)
1-2-4. Note in connecting CCU connector ...................................1-11 (E)
1-3. Location of Printed Circuit Boards ..................................................... 1-12 (E)
1-4. Removing/Reinstalling the Side Panel (HDC-F950) ..........................1-14 (E)
1-5. Switch Setting on the Boards ..............................................................1-15 (E)
1-6. Adjusting the Position of the Shoulder Pad (HDC-F950) ...................1-20 (E)
1-7. Installing the Incom Panel Assembly to the Camera Backside
(HDC-F950) ........................................................................................ 1-20 (E)
1-8. Installing the Battery Adaptor BKP-L551 (HDC-F950) .....................1-21 (E)
1-9. Notes on Use of the RTS Kit (HDC-F950) .........................................1-21 (E)
1-10. Disconnecting/Reconnecting Flexible Card Wire ...............................1-22 (E)
2. Service Overview
2-1. Cleaning of Connector/Cable ................................................................ 2-1 (E)
2-2. Cleaning the Vent Portion of the Fan (HDC-F950 only) ...................... 2-3 (E)
2-3. Replacing the Fuse (HDC-F950) ..........................................................2-4 (E)
2-4. Recommended Replacing Parts............................................................. 2-5 (E)
2-4-1. HDC-F950 ............................................................................ 2-5 (E)
2-4-2. HKC-T950 ............................................................................ 2-6 (E)
2 (E) HDC-F950 IMM
3. Setup Menu
3-1. Setup Menu ........................................................................................... 3-1 (E)
3-2. TOP Menu ............................................................................................. 3-3 (E)
3-3. USER Menu .......................................................................................... 3-4 (E)
3-4. USER MENU CUSTOMIZE Menu...................................................... 3-4 (E)
3-5. OPERATION Menu .............................................................................. 3-5 (E)
3-6. PAINT Menu .........................................................................................3-7 (E)
3-7. MAINTENANCE Menu ..................................................................... 3-18 (E)
3-8. FILE Menu .......................................................................................... 3-25 (E)
3-9. DIAGNOSIS Menu ............................................................................. 3-30 (E)
4. File System
4-1. File Structure ......................................................................................... 4-1 (E)
4-2. Operator File ......................................................................................... 4-2 (E)
4-3. Preset Operator File............................................................................... 4-3 (E)
4-4. Scene File .............................................................................................. 4-4 (E)
4-5. Reference Files ...................................................................................... 4-6 (E)
4-6. Lens File ................................................................................................ 4-8 (E)
4-7. OHB File ............................................................................................... 4-9 (E)
4-7-1. Storing the Black Shading and White Shading .................... 4-9 (E)
4-7-2. Adjusting the ND Offset .................................................... 4-10 (E)
4-8. File items ............................................................................................. 4-11 (E)
3 (E)
HDC-F950 IMM
Manual Structure
Purpose of this manual
This manual is the installation and maintenance manual of HD Color Camera HDC-
F950 and HD CCD Block Adaptor HKC-T950 for HDC-F950.
This manual is intended for use by trained system and service engineers, and is
provided information required for the installation and maintenance information .
Related manuals
Besides this installation and maintenance manual, the following manuals are avail-
able.
..
..
.HDC-F950 Operation Manual (Supplied with HDC-F950)
This manual is necessary for the use and the operation of the HDC-F950.
Part No. : 3-789-477-XX
..
..
.HKC-T950 Operation Manual (Supplied with HKC-T950)
This manual is necessary for the installation and operation of the HKC-T950.
Part No. : 3-206-420-XX
..
..
.HDC-F950 e-manual (Tentative name) (Available on request)
This electronic manual intended for use by trained system and service engineers
describes (replacement of main parts, SERVICE menu, electrical alignment,
detailed parts list, block diagrams, schematic diagrams, and board layouts.)
required for parts-level service of the HDC-F950.
For obtaining, contact your local Sony Sales Office/Service Center.
..
..
.System Manual (Available on request)
This manual is necessary for connection and operation of this unit and other
peripheral equipment.
If this manual is required, please contact to your local Sony Sales Office/Service
Center.
..
..
.“Semiconductor Pin Assignments”CD-ROM (Available on request)
This “Semiconductor Pin Assignments” CD-ROM allows you to search for
semiconductors used in B&P Company equipment.
Semiconductors that cannot be searched for on this CD-ROM are listed in the
maintenance manual for the corresponding unit. The maintenance manual contains
a complete list of all semiconductors and their ID Nos., and thus should be used
together with the CD-ROM.
Part number: 9-968-546-XX
4 (E) HDC-F950 IMM
Contents
The installation and maintenance manual is organized by following sections.
Section 1 Installation Overview
This section is described about the information that is required to install (switch
setting on the board, connection information, and the like.) and when installing this
unit.
Section 2 Service Overview
This section is described about the recommended replacing parts, replacing the fuse
and the cleaning procedures.
Section 3 Setup Menu
This section is described about the setup menu (TOP menu, OPERATION menu,
PAINT menu, MAINTENANCE menu, FILE menu and DIAGNOSIS menu).
Section 4 File System
This section is described about the file system to control data.
1-1 (E)
HDC-F950 IMM
Section 1
Installation Overview
1-1. Checking the ROM and Software Version
When connecting the peripheral equipment in the list below to HDC-F950, be sure
to check that the ROM and software version on each peripheral device is corre-
sponding to the camera to be connected.
If the ROM and software version is lower than the specified below, be sure to
perform ROM replacement and updating the software.
If ROM replacement and updating the software are required, contact your local Sony
Sales Office/Service Center.
ROM
Peripheral equipment Board name Ref No. Rom version
MSU-700A/750 CPU-293/CPU-286 IC5, IC6/IC5, IC6 Ver. 1.10 or higher
RCP-720/721 MPU-79 IC10 Ver. 2.73 or higher
RCP-730/731 MPU-79 IC10 Ver. 2.73 or higher
RCP-740/741 MPU-79 IC10 Ver. 2.73 or higher
RCP-700/701 MPU-92 IC6 Ver. 2.73 or higher
RM-B150 CPU-266 IC4 Ver. 1.00 or higher
Software
Peripheral equipment Board name Software version
RCP-750/751 MPU-123 Ver. 1.01 or higher
RM-B750 MPU-124 Ver. 1.00 or higher
1-2 (E) HDC-F950 IMM
!.
!;
8
!,
2
4
!/
!-
!]5
3
![
6!\
9
7
1
!'
!=
*
1-2. Connectors and Cables
1-2-1. Connector Input/Output Signals
HDC-F950 Connector Layout
*: Use 4connector by selecting PROMPTER OUT, GENLOCK IN and RET IN signals with the switch.
PROMPTER OUT signal become effective when the camera is connected to CCU.
GENLOCK IN and RET IN signals become effective when the camera is used alone.
HKC-T950 Connector Layout
@[
@- @= @/
!\
@\
@-
@[
@=
@]
Other manuals for HDC-F950
1
This manual suits for next models
1
Table of contents
Other Sony Camcorder manuals
Sony
Sony DCR-HC28 - Minidv Handycam Camcorder User guide
Sony
Sony nxcam HXR-NX3D1E User manual
Sony
Sony Handycam FDR-AX100 User manual
Sony
Sony DCR-IP45 - Micromv Digital Camcorder User manual
Sony
Sony BVP-E10 Series Dimensional drawing
Sony
Sony Handycam CCD-TR40 User manual
Sony
Sony Handycam CCD-FX525 User manual
Sony
Sony FCBEH3300 User manual
Sony
Sony Handycam CCD-TR502E User manual
Sony
Sony Handycam Video 8 CCD-TRV11 User manual
Sony
Sony HDC1580 User manual
Sony
Sony HDR-HC1 User manual
Sony
Sony DCR PC 8 E User manual
Sony
Sony MiniDV Handycam DCR-HC26 User manual
Sony
Sony Handycam DCR-SR47 User manual
Sony
Sony DCR-TRV39 - Digital Handycam Camcorder User manual
Sony
Sony HDR-AS50R Instruction sheet
Sony
Sony BVP-900 Series User guide
Sony
Sony CCD-TRV128 Training manual
Sony
Sony Handycam Vision CCD-TRV75 User manual
