SonicWALL SonicWave 641 User manual
Contents
SonicWall® SonicWave 641 Safety and Regulatory Information Guide 6
Mounting the SonicWave 641 7
Mounting Using Ceiling Brackets 7
Mounting Using Screws 9
Connecting PoE and Network Cables 10
Safety Information for Installation and Operation 11
Installation Requirements 11
RF Safety Distance 12
Cable Connections 12
Power Supply Information 12
Restricted Environments 12
Radio Approvals 13
Radio or Television Interference 13
Wireless Interoperability 13
Consignes de sécurité pour l'installation et l'utilisation 14
Exigences relatives à l'installation 14
Distance de sécurité RF 15
Raccordements 15
Informations sur l’alimentation électrique 15
Environnements restreints 15
Approbations radio 16
Interférence radio ou télévision 16
Interopérabilité sans fil 16
Sicherheitshinweise für den Einbau und Betrieb 17
Anforderungen an die Installation 17
HF-Sicherheitsabstand 18
Kabelverbindungen 18
Informationen zur stromversorgung 18
Eingeschränkte Umgebungen 18
Funkzulassungen 19
Radio- oder Fernsehstörungen 19
Drahtlose Interoperabilität 19
安全信息安裝和操作 20
架設 SonicWave 641 20
使用螺絲安裝 22
連接 PoE 和網路線 22
安全須知與規範資訊 23
無線電頻率安全距離 24
SonicWave 641 Safety and Regulatory Reference Guide
Contents
2
纜線連接 24
電源供應器資訊 24
(台灣RoHS)/限用物質含有情況標示資訊 24
安全信息安装和操作 25
安装 SonicWave 641 25
インストールと操作のための安全性情報 30
SonicWave 641 の取り付け 30
天井ブラケットを使用した取り付け 30
アンカーねじを使用した取り付け 33
PoE およびネットワークケーブルの接続 33
安全性および規 制 に関 する情報 34
RF 安全距離 35
ケーブルの接続 35
電源に関する情 報 35
설치 및 운영에 대 한 안전 정보 35
SonicWave 641 마운팅 36
Informações normativas e de segurança 40
Montagem do SonicWave 641 40
Conectar cabos PoE e de rede 43
Informações normativas e de segurança 44
Conexões por cabo 45
Informações sobre a fonte de alimentação 45
Agency Specific Information 46
FCC ID: 2AKCZ-107 46
FCC, Class B 47
Radiation Exposure Statement (FCC) 48
United States of America Authorized Channels 48
Innovation, Science and Economic Development Canada Notices 49
Innovation, Sciences et Développement économique Canada Notifications 50
低功率電波輻射性電機管理辦法 51
CE Notice 51
EU and EFTA 52
Declaration of Conformity 52
Simplified EU/CE Declaration of Conformity 53
Country Selection 55
Electromagnetic Compatibility Information 55
Electromagnetic Compatibility 56
Електромагнитна съвместимост 57
电磁兼容性 59
電磁相容 59
Elektromagnetska kompatibilnost 60
Elektromagnetická kompatibilita 61
Elektromagnetisk kompatibilitet 62
Elektromagnetische compatibiliteit 63
SonicWave 641 Safety and Regulatory Reference Guide
Contents
3
Elektromagnetiline ühilduvus 65
Sähkömagneettisella yhteensopivuudella 66
Compatibilité électromagnétique 67
Elektromagnetischer Verträglichkeit 68
Ηλεκτρομαγνητική συμβατότητα 69
Elektromágneses kompatibilitás 70
Compatibilità elettromagnetica 71
電磁的両立性 73
전자기 호환성 74
Elektromagnētiskā saderība 75
Elektromagnetinis suderinamumas 76
Kompatibilità elettromanjetika 77
Zgodność elektromagnetyczna 78
Compatibilidade eletromagnética 79
Электромагнитной совместимостью 80
Elektromagnetna združljivost 82
Compatibilidad electromagnética 83
ความเข้ ากั นได้ ทางแม่ เหล็ กไฟฟ้ า 84
Elektromanyetik uyumluluk 85
EMC Agency Specific Information 86
FCC, Class B 88
Industry Canada, Class B 88
Industry Canada, Classe B 88
European Union, Class B 89
Европейски съюз, Клас B 89
CE Notice 89
CE обозначение 89
Upozornění CE 89
Evropská unie, třída B 89
Bemærkning vedr. CE 90
Den Europæiske Union, Klasse B 90
CE-kennisgeving 90
Europese Unie/Klasse B 90
CE-vastavusmärgis 90
Euroopa Liit, Klass B 90
CE-ilmoitus 91
Euroopan unioni, luokka B 91
Avis de la CE 91
Union européenne, Classe B 91
CE-Hinweise 91
Europäische Union, Klasse B 91
Σήμα CE 92
Ευρωπαϊκή Ένωση, Κατηγορία B 92
CE jelzés 92
Európai Unió, „B” osztály 92
SonicWave 641 Safety and Regulatory Reference Guide
Contents
4
Avviso CE 92
Unione Europea, Classe B 92
CE paziņojums 93
Eiropas Savienība, klase B 93
CE pastaba 93
Europos Sąjunga, B klasė 93
Avviż CE 93
Unjoni Ewropea, Klassi B 93
Oznaczenie CE 94
Unia Europejska, klasa B 94
Aviso da CE 94
União Europeia, Classe B 94
Notificare CE 94
Uniunea Europeană, Clasa B 94
Poznámka o značke CE 95
Európska únia, Trieda B 95
Obvestilo CE 95
Evropska unija, razred B 95
Notificación del CE 95
Unión Europea, Clase B 95
CE-meddelande 96
Europeiska unionen, klass B 96
Tüketici Elektronikleri Bildirisi 96
Avrupa Birliği, B Sınıfı 96
KCC, B 등급 장비 (가정용 정보/원격 통신 장비) 96
BSMI 通告 (僅限於台灣) 97
SonicWall Support 98
About This Document 99
SonicWave 641 Safety and Regulatory Reference Guide
Contents
5
SonicWall®SonicWave 641 Safety and
Regulatory Information Guide
Regulatory Model Number APL67‐107
August 2022
Products with “UL 2043” printed on their product labels are within the limit specified in the “UL 2043 Standard for
Fire Test for Heat and Visible Smoke Release for Discrete Products Installed in Air‐Handling Spaces” (Plenum).
Applies only when powered through PoE. The PoE power supply is not covered the by the UL 2043 evaluation of
this Access Point.
This document contains safety and regulatory information for the SonicWall SonicWave 641. The SonicWave 641
is a wireless access point with an internal wireless radio that can provide wireless access on either 5GHz or
2.4GHz and supports the 802.11 ac/n/g/a/b standards.
Topics:
lMounting the SonicWall 641
lConnecting PoE and Network Cables
lSafety Information for Installation and Operation
lConsignes de sécurité pour l'installation et l'utilisation
lSicherheitshinweise für den Einbau und Betrieb
l安全信息安裝和操作
l安全信息安装和操作
lインストールと操作のための安全性情報
l설치 및 운영에 대 한 안전 정보
lInformações normativas e de segurança
lAgency Specific Information
lElectromagnetic Compatibility Information
lEMC Agency Specific Information
1
6SonicWave 641 Safety and Regulatory Reference Guide
SonicWall® SonicWave 641 Safety and Regulatory Information Guide
Mounting the SonicWave 641
You can mount your SonicWave 641 to a wall or ceiling using the same bracket, or you can simply set it on a flat
surface. For safety tips when mounting the SonicWave 641, see Safety information for installation and operation.
Topics:
lMounting Using Ceiling Brackets
lMounting Using Screws
Mounting Using Ceiling Brackets
The SonicWave 641 comes with a ceiling/wall mounting bracket and screws. This section describes how to use
the mounting hardware to attach the SonicWave to the ceiling or an indoor wall.
CEILING BRACKET
The underside of the SonicWave 641 has two mounting bracket insertion points where you can click the bracket
tabs in to help secure the unit to the wall or ceiling, or to a ceiling T-bar. Use these mounting bracket insertion
points to attach the bracket to the SonicWave 641.
7SonicWave 641 Safety and Regulatory Reference Guide
SonicWall® SonicWave 641 Safety and Regulatory Information Guide
MOUNTING BRACKET INSERTION POINTS
To attach to a ceiling T-bar:
1. Attach the mounting bracket to the underside of the SonicWave .
2. Supporting the SonicWave in one hand, position the edge clips of the bracket over the edge of the ceiling
T-bar.
3. Rotate the SonicWave counterclockwise (to the left when looking up at it) until the bracket is securely
attached to the T-bar.
To remove the original configuration SonicWave 641 from the ceiling T-Bar, gently pressing upward, rotate it
clockwise (to the right when looking up at it) until the bracket detaches from the crossbar.
CEILING/WALL BRACKET
The SonicWave 641 comes with a mounting bracket so it can be mounted on the ceiling or other flat surface. The
same bracket used as a ceiling T-bar mount, can also be mounted on a ceiling (or wall) using either the two
provided anchors and screws. For mounting on a flat surface, holes in the bracket ceiling T-bar clips provide
insertion points for screws. Use #6 (3.5mm) zinc plated pan head machine screws (sheet metal screws) of length
8SonicWave 641 Safety and Regulatory Reference Guide
SonicWall® SonicWave 641 Safety and Regulatory Information Guide
1.25 inches (31.75 mm). When mounting on drywall, anchors should be used. Anchors must accommodate the
screws and be rated to hold at least 10 lbs (4.5 kg).
The underside of the SonicWave 641 has two insertion points where you can hang the SonicWave by two plastic
insertion stubs located on the underside of the ceiling bracket. You can use these insertion stubs to attach the
bracket to the SonicWave 641 after the bracket has been installed on a ceiling or wall.
Mounting Using Screws
To mount the SonicWave 641 using screws:
1. Measure the distance between the two screw attachment points on the underside of the SonicWave
ceiling bracket.
2. On the mounting surface, mark the locations for the two screw insertion points.
3. Drill pilot holes at the marked locations. For a wood surface, use a drill bit that is appropriate for the
screws. For drywall, use a drill bit that is appropriate for the anchors.
4. For drywall, screw in the anchors.
5. Insert the screws into the wall or anchors, and screw them in deep enough to leave minimal space
between the screw heads and the wall surface.
6. Supporting the SonicWave in your hands, securely fit the underside slots of the SonicWave onto the screw
heads.
9SonicWave 641 Safety and Regulatory Reference Guide
SonicWall® SonicWave 641 Safety and Regulatory Information Guide
Connecting PoE and Network Cables
This section describes how to connect the PoE and network cables to the SonicWave 641. For best results, first
connect the cables and then mount the SonicWave to the ceiling or wall. The SonicWave 641 is powered by a
power adapter or by Power over Ethernet (PoE) (both sold separately). SonicWall recommends using CAT 5e
cables to connect PoE to the SonicWave.
CAUTION: When using PoE to power the device, an 802.3at compliant PoE injector, PoE enabled
switch, or SonicWall PoE enabled appliance is required to provide power to each SonicWave 641.
To maintain power to the SonicWave 641, the maximum length of CAT 5e cable from the PoE device
to the SonicWave 641 is 100 meters (333 feet).
To connect the SonicWave 641 to PoE and the network:
1. Using an Ethernet cable, connect the Data in port on the PoE Injector or switch to an interface on your
network device. If using a SonicWall firewall, connect it to an existing WLAN zone interface on the firewall
or to an unused interface to be configured later in SonicOS.
2. Using a second Ethernet cable, connect the Data and Power Out port on the PoE injector to the
LAN/PoE port on your SonicWave 641. This provides your main Ethernet and PoE connection.
Refer to your PoE guide for more information.
3. Plug the power cord of the PoE Injector into an appropriate power outlet.
4. Wait up to two minutes for the LAN LED on the SonicWave 641 to illuminate. This indicates an active
connection.
5. Optionally connect the CONSOLE port using an mini USB cable, for command line management.
10SonicWave 641 Safety and Regulatory Reference Guide
SonicWall® SonicWave 641 Safety and Regulatory Information Guide
Other manuals for SonicWave 641
1
Table of contents
Other SonicWALL Network Router manuals
SonicWALL
SonicWALL APL66 106 User manual
SonicWALL
SonicWALL SonicPoint Service manual
SonicWALL
SonicWALL Network Security NSA 220 Series User manual
SonicWALL
SonicWALL TZ 210 Series User manual
SonicWALL
SonicWALL TZ 190 User manual
SonicWALL
SonicWALL TZ 215 Series User manual
SonicWALL
SonicWALL SOHO APL31-0B9 User manual
SonicWALL
SonicWALL SOHO TZW User manual
SonicWALL
SonicWALL SuperMassive 9800 User manual
