SOMFY Dexxo Pro 800 User manual

Installation instruction for the gate drive

Series Dexxo

Before programming the drive, the upper gate's limit switch must be installed.

The drive uses a movement limiter as reference points for automatically setting the upper end position. Upper position

limiter (when the door is fully open).

[1] [2]

The engine rail mounting bracket should be mounted in the lintel or on the ceiling, however not more than

200 mm from the lintel (see drawing)

AUTOSET function, setting the gate end positions.

Dexxo Pro/io 800/1000 [N]

The condition for the correct course of the AUTOSET mode is the installation of the upper limit stop

and the coupling of the bogie with the gate.

The learning mode (AUTOSET) can be started each time the need arises.

The servomotor automatically selects the thrust force to the specic gate.

1. Press the key for approx. 2 seconds, the drive lamp will light up and go o. S2 will appear on the display.

2. Using the and buttons, move the chain / belt coupler until it engages with the guide arm (bogie). Long press

causes continuous closing movement. Long press causes a continuous opening movement.

3. Using the button close the gate by setting the lower end position.

4. Press to start the learning cycle (Autoset).

5. The gate will start a full OPEN / CLOSE cycle to automatically select the force.

6. C1 on the display - means conrmation of the correct execution of the Autoset function.

7. S0 or S1 is the negative result of the AUTOSET function. In this case, check the mechanics of the gate and try again.

Learning function, setting the gate end positions.

Dexxo Optimo 800N

The learning mode (AUTOSET) can be started each time the need arises.

The condition for the correct course of the AUTOSET mode is the installation of the upper limit stop

and the coupling of the bogie with the gate.

1. Press the key for approx. 2 seconds until the lamp switches on. The display range indicator light ashes .

2. Using the and buttons, move the chain / belt coupler until it engages with the guide arm (bogie). Long press

causes continuous closing movement. Long press causes a continuous opening movement.

3. Using the button close the gate by setting the lower end position. Release the key before the drive will force

the gate.

4. Press to start the learning cycle.

5. The gate will start a full OPEN / CLOSE cycle to determine the upper end position.

6. If the learning cycle has been successfully completed, the indicator light is on.

7. If the learning cycle has not been completed correctly, the indicator light continues to ash.

PROGRAMMING OF REMOTE CONTROLS - Dexxo: Optimo, Pro, io

Press and hold the key for approx. 2 seconds (the bulb will light up). Press the selected key on the remote control

(the bulb will start ashing).

Reprogramming the same remote control (channel) removes it from the Dexxo memory.

ERASE SETTING

Pressing the button for 7 seconds (the - lamp will go o - ashing) will erase all saved settings.

Detailed information about Somfy Dexxo engines can be found in the package with the engine.

DELETION OF REMOTE CONTROL

Pressing the button for 7 seconds (the lamp will light - go o - ashing) will erase all previously saved transmitters.

www.ekookna.com

1/2018

Other manuals for Dexxo Pro 800

This manual suits for next models

Table of contents

Other SOMFY Gate Opener manuals

SOMFY

SOMFY FX24 User manual

SOMFY

SOMFY 3S io User manual

SOMFY

SOMFY METRO SMART 800 io User manual

SOMFY

SOMFY Maestria 50 RTS User manual

SOMFY

SOMFY AXOVIA 220B RTS User manual

SOMFY

SOMFY EXAVIA User manual

SOMFY

SOMFY Ixengo L 230V RTS User manual

SOMFY

SOMFY ELIXO 2000 230V RTS User manual

SOMFY

SOMFY Sonesse Ultra 50 DC RS485 User manual

SOMFY

SOMFY Axorn 70 User manual

SOMFY

SOMFY EXAVIA User manual

SOMFY

SOMFY EXAVIA 500 User manual

SOMFY

SOMFY SGA 6000 User manual

SOMFY

SOMFY FREEVIA 400 User manual

SOMFY

SOMFY QuickCopy User manual

SOMFY

SOMFY Elixo 500 User manual

SOMFY

SOMFY Elixo 500 3S io User manual

SOMFY

SOMFY Dexxo RTS Pro User manual

SOMFY

SOMFY Elixo 500 230V RTS User manual

SOMFY

SOMFY Axovia 400C NS User manual

SOMFY

SOMFY IXENGO J S 230V User manual

SOMFY

SOMFY ELIXO SMART io User manual

SOMFY

SOMFY HOME MOTION Axovia 220B User manual

SOMFY

SOMFY ELIXO 2000 230V RTS User manual

Popular Gate Opener manuals by other brands

Elite

Elite CSW200UL instruction manual

CAME

CAME FROG-PM4 installation manual

Aprimatic

Aprimatic ONDA 500 installation instructions

Turnstiles

Turnstiles FSW 900 manual

Erreka

Erreka BUL BL33 Quick installation and programming guide

Erreka

Erreka VULCAN S manual

Beninca

Beninca R1-2 WBV quick start guide

Erreka

Erreka VULCAN D user manual

Motorline professional

Motorline professional FORT User& installer's manual

Beninca

Beninca BOB5024 manual

AGA

AGA GATEMASTER 900 HD installation manual

Chamberlain

Chamberlain MotorLift HC280ML Mechanical installation

Cardin

Cardin BL Series manual

Westfalia

Westfalia 85 27 06 instruction manual

CAME

CAME F500 installation manual

Extel

Extel VERA quick guide

Comunello Automation

Comunello Automation ABACUS 220 Installation and user manual

CAME

CAME FA40230CB installation manual