SOMFY QuickCopy Operating instructions
www.somfy.com
Interactive operating instructions
QuickCopy &
QuickCopy PC Soware
Ref. 5129290A
2/18
Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images
QuickCopy & QuickCopy PC Soware [ Back to Contents ]
Interactive operating instructions
The QuickCopy device enables the quick copying of settings of a Chronis / Soliris Smoove or Smoove
UNO io device to other Chronis / Soliris Smoove & Smoove UNO io controllers. QuickCopy is operated
over the plugged in Chronis / Soliris Smoove & Smoove UNO io device (see chapter "So Key functions
of the Smoove device").
The QuickCopy device runs on batteries and can also be supplied over the USB interface of the
computer.
This manual is interactive:
• Click on each title or page number in the table of Contents to access it directly.
• Click on [ Back to Contents ] at the bottom of each page to return to table of Contents.
WELCOME PAGE
3/18
Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images
QuickCopy & QuickCopy PC Soware
Interactive operating instructions
1. DESCRIPTION 4
2. STARTING UP THE QUICKCOPY DEVICE 5
3. SOFT KEY FUNCTIONS OF THE SMOOVE DEVICE 6
4. COPY FUNCTION OF THE QUICKCOPY DEVICE 7
4.1. Copy Smoove device to QuickCopy 8
4.2. Copy QuickCopy to device 9
4.3. Configure 10
4.4. Reset / Delete storage location 10
5. QUICKCOPY PC SOFTWARE 11
5.1. Starting-up the QuickCopy PC Soware 11
5.2. Copy function of the soware 14
5.3. Parameter settings 15
6. TECHNICAL DATA 17
CONTENTS
[ Interactive instructions ]
You can click on each title to access it directly.
4/18
Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images
QuickCopy & QuickCopy PC Soware [ Back to Contents ]
Interactive operating instructions
1. DESCRIPTION
There is a QuickCopy PC Soware written for the QuickCopy. It is a user-friendly soware which
enables copying of device settings to additional devices (as with the QuickCopy device), as well as
parameter settings of the Chronis / Soliris Smoove & Smoove UNO io device.
ON BUTTON WITH BATTERY
OPERATION
LEDS
Show move direction with
manual operation
USB CABLE TO PC
CONNECTION
RESET BUTTON
SYNC LEDS
Display of communication
from device to QuickCopy
or from QuickCopy to
device
5/18
Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images
QuickCopy & QuickCopy PC Soware [ Back to Contents ]
Interactive operating instructions
2. STARTING UP THE QUICKCOPY DEVICE
1. Unscrew the 4 screws and open the device.
2. Place the batteries in the QuickCopy device and screw the device closed.
3. Plug the Chronis / Soliris Smoove or Smoove UNO io device to the QuickCopy device.
4. Press the ON button of the QuickCopy device to supply the Chronis / Soliris Smoove or Smoove
UNO io device with power.
> "Somfy", followed by "Operating menu", are briefly displayed.
Note: Aer approx. 3 minutes with no operation of the device, the power supply is switched off
automatically.
Unplug the Smoove device as soon as the Copy procedure is completed.
6/18
Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images
QuickCopy & QuickCopy PC Soware [ Back to Contents ]
Interactive operating instructions
3. SOFT KEY FUNCTIONS OF THE SMOOVE DEVICE
The so key functions of the plugged in Chronis / Soliris Smoove device are similar to that of normal
operation:
Go back to the previous
menu or to menu
Confirm selection or setting
Navigate through the menu
7/18
Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images
QuickCopy & QuickCopy PC Soware [ Back to Contents ]
Interactive operating instructions
On the main display of the Smoove device, "Copy settings" appears with the following options:
- Device to QuickCopy: the settings from plugged-in Smoove
device are copied to the QuickCopy storage (see chapter "Copy
Smoove device to QuickCopy").
- QuickCopy to device: the other way around, the settings from
a QuickCopy storage are copied to the plugged-in Smoove
device (see chapter "Copy QuickCopy to device").
- Configure: exit the copy function. QuickCopy is used as a power
supply for the device (see chapter "Configure").
4. COPY FUNCTION OF THE QUICKCOPY DEVICE
Copy settings
Device to QuickCop
QuickCopy to Devi
Copy settings
QuickCopy to Devi
Configure
8/18
Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images
QuickCopy & QuickCopy PC Soware [ Back to Contents ]
Interactive operating instructions
4. COPY FUNCTION OF THE QUICKCOPY DEVICE
4.1. Copy Smoove device to QuickCopy
Copy settings
1. Confirm "Device to QuickCopy".
> In the menu point "QuickCopy Target", there are 10 different
storage destinations available (Name 1 to Name 10).
Note: The naming of storage destinations 1 to 10 is fixed and cannot be modified with the QuickCopy
device. For this reason, the storage destinations are to be documented separately.
The status of the storage destinations is shown with a symbol:
- X = the space is empty
- V = the space is occupied
2. Scroll for storage destination and save your selection.
> The synch LED on the QuickCopy device lights up briefly in green and the following message
appears: "Sending configuration to the QuickCopy tool".
Note: If the storage destination is already occupied, the following message appears: "Already stored
data will be overwritten". Either confirm this option or exit.
Copy only Time and Date
In the factory state, the storage in the QuickCopy device is empty and with no time and date settings.
Here, you have the option of copying only from the plugged-in Smoove device to the QuickCopy
device. When the QuickCopy device is run on batteries, the time and date remain during the period
with battery operation. However, aer changing the batteries, the time and date must be copied / set
again.
1. Following storage destination number 10, confirm the option "Only
time+date".
> The following message appears: "Sending time/date to the
QuickCopy tool".
2. Remove the Smoove device aer completion of the copy procedure.
QuickCopy target
1 - V - Name 1
2 - V - Name 2
QuickCopy target
10 - V - Name 10
Only time+date
9/18
Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images
QuickCopy & QuickCopy PC Soware [ Back to Contents ]
Interactive operating instructions
4. COPY FUNCTION OF THE QUICKCOPY DEVICE
4.2. Copy QuickCopy to device
Copy settings
1. Confirm "QuickCopy to device".
> In the menu point "QuickCopy source", there are 10 different
storage destinations available (Name 1 to Name 10).
The status of the storage is displayed with a symbol:
- X = the space is empty
- V = the space is occupied
2. Scroll for storage destination and save your selection.
> The Sync LED lights up briefly in green and the following message appears: "Getting
configuration from the QuickCopy tool".
Note: Should the end products be different, the correct move time must be entered again. If the length
of the end products is identical with the stored configuration, you can take on the value listed and
simply confirm.
Copy only Time and Date
When the Smoove device has not been supplied with electrical power for several hours, it loses the
time and date. For this reason, it is possible to copy only time and date from the QuickCopy device.
1. Following storage destination number 10, choose the option "Only
time+date".
2. Confirm this option.
> The following message appears: "Getting time/date from
QuickCopy tool".
QuickCopy source
1 - V - Name 1
2 - V - Name 2
QuickCopy source
10 - V - Name 10
Only time+date
10/18
Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images
QuickCopy & QuickCopy PC Soware [ Back to Contents ]
Interactive operating instructions
4. COPY FUNCTION OF THE QUICKCOPY DEVICE
4.3. Configure
You exit the copy function and the plugged in device functions as in the built-in condition. The
QuickCopy device now only supplies power.
Carry out the settings comfortably.
Note: To return to the copy function, the Smoove device must be unplugged and subsequently
plugged in again to the QuickCopy device.
4.4. Reset / Delete storage location
In case the complete QuickCopy storage were deleted, press the Reset button for at least 10 seconds.
To show confirmation, both synch LEDs light up briefly.
Other manuals for QuickCopy
2
Table of contents
Popular Conference System manuals by other brands
Kramer
Kramer VIA GO quick start guide
AVT
AVT MAGIC AC1 Go Configuration guide
ProSoft Technology
ProSoft Technology AN-X4-AB-DHRIO user manual
Sony
Sony PCS-I150 Operation guide
Middle Atlantic Products
Middle Atlantic Products VTC Series instruction sheet
Prentke Romich Company
Prentke Romich Company Vanguard Plus Setting up and using
