Solwise SAR-600 Instructions for use
Easy Start Guide
Solwise SAR-600 range
ADSL2+ Routers
Covers the following models using RouterTech Firmware 2.1:
• Single LAN Port, SAR-600E
• Four LAN Port, SAR-600ER
• Four LAN Port with USB & 11g Wireless, SAR-600EW
Version 2.1
Easy Start
• Product warranty does not apply to damage caused by lightning, power surges or wrong
voltage usage.
• This product is for use only in UL Listed computers.
Declaration of Conformity for the Wireless SAR-600EW Model
Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE
Directive of the European Union (1999/5/EC). This equipment meets the following conformance
standards:
EN300 328, EN301 489-17, EN60950
Countries of Operation and Conditions of Use in the European Community
This device is intends to be operated in all countries of the European Community. Requirement is for
indoors vs. outdoors operation, license requirements and allowed channels of operation apply in some
countries as described in this document.
Note: The user must use the configuration utility provided with this product to check the
current channel of operation and confirm that the devices operating in conformance with the
spectrum usage rules for the European Community countries as described below.
If operation is occurring outside of the allowable channels as indicated in this guide, then the user
must cease operating the product and consult with the local technical support staff responsible for the
wireless network.
This device may be operated indoors or outdoors in all countries of the European Community using
the 2.4GHz band: Channels 1 – 13, except where noted below:
·In Italy the end-user must apply for a license from the national spectrum authority to operate this
device outdoors.
·In France outdoor operation is only permitted using the 2.4 – 2.454 GHz band: Channels 1 – 7.
Solwise Ltd Easy Start Page 1 of 33
www.solwise.co.uk
Easy Start
Contents:
1Introduction.................................................................................................................................... 3
2Minimum System Requirements ................................................................................................... 3
3ADSL Router Package .................................................................................................................. 3
4Router Overview............................................................................................................................ 5
4.1 SAR-600E ...............................................................................................................5
4.2 SAR-600ER.............................................................................................................7
4.3 SAR-600EW............................................................................................................9
5Wireless Router Connections for the SAR-600EW..................................................................... 11
5.1 Up to 4 PCs Connections......................................................................................11
5.2 For More than 4 PCs Connections........................................................................11
6Connecting the your Router to Your Computer/Notebook using a LAN cable............................ 12
6.1 Connecting to the Ethernet ...................................................................................12
6.2 Connecting to the ADSL Line................................................................................13
6.3 Checking Your Connections..................................................................................13
6.4 Connecting to the Power Outlet ............................................................................13
6.5 Powering On..........................................................................................................14
7Configuring Your Ethernet Network Card ................................................................................... 14
7.1 For Windows® 98 Second Edition / Windows® Me..............................................14
7.2 For Windows®2000 / Windows®XP ...................................................................15
8Installing the USB Device Driver (SAR-600EW Model) .............................................................. 16
8.1 Installing the USB Device Driver - For Windows® 98 Second Edition .................16
8.2 Installing the USB Device Driver - For Windows® Me..........................................18
8.3 Installing the USB Device Driver - For Windows® 2000.......................................19
8.4 Installing the USB Device Driver - For Windows® XP ..........................................20
9Configuring Your Internet Browser.............................................................................................. 21
9.1 Microsoft® Internet Explorer™ (based on IE 5.5).................................................21
9.2 Netscape® Navigator ............................................................................................21
10 Setting Up Your Router Via The Wizard Utility ........................................................................... 22
10.1 For Windows 2000/ XP Users ONLY ....................................................................22
10.2 Installing the CD Wizard Self-Installation Utility. ...................................................22
11 Router Setup Via Web Interface ................................................................................................. 29
12 Wireless Setup Via Web Interface .............................................................................................. 31
13 Important Default Settings........................................................................................................... 32
Copyright
All rights reserved. No part of this document may be reproduced in any form or by any means without
written permission from the product manufacturer.
Changes are periodically made to the information in this document. They will be incorporated in
subsequent editions. The product manufacturer may take improvement and/or changes in the product
described in this document at any time
Solwise Ltd Easy Start Page 2 of 33
www.solwise.co.uk
Easy Start
1 Introduction
Thank you for purchasing your Solwise SR-600 ADSL router. This Quick Setup Guide covers all
models in the SAR-600 range including the SAR-600E with single LAN Port, SAR-600ER with four
LAN Ports, and the SAR-600EW 4-Port Ethernet USB Wireless-G ADSL Router. Solwise ADSL
routers allow you to access and share high-speed broadband connection with multiple PCs using a
single device wired or wireless (EW model).
The SAR-600 Router can be connected to any computer/notebook with a 10/100 Base-T Ethernet card
or, using the SAR0600EW model, a USB port for wired connection or an IEEE 802.11b/g Wireless
adapter. The Ethernet ports have Auto MDI/MDIX feature which can allows both cross or straight UTP
cable to be utilized. The Wireless 4-port Ethernet Router also has an in-built IEEE802.11g Wireless
LAN Access Point for wireless connectivity.
This documentation assumes that you have already installed an Ethernet card or, if using the SAR-
600EW router, a wireless adapter on your computer/notebook
2 Minimum System Requirements
• Pentium®MMX 233MHz
• Ethernet card installed with TCP/IP Protocol (Required only if you are connecting to the
ETHERNET port of your DSL Router)
• Optional Single USB port (Required if you are connecting to USB port of the router SAR-
600EW)
• IEEE 802.11b Wireless adapter (Required if you are connecting to the Wireless Access Point
of the SAR-600EW router)
• OS independent for Ethernet
• Microsoft Windows 98SE/ME/2000/XP for USB use with the SAR-600EW router
• Web Browser support:
Microsoft Internet Explorer 4.0 (or later versions)
Netscape® Navigator 3.02 (or later versions)
3 ADSL Router Package
For any missing items, please contact your dealer immediately.
Solwise Ltd Easy Start Page 3 of 33
www.solwise.co.uk
Easy Start
1. ADSL Ethernet Route
r
3. Telephone cable
(
RJ-11
)
2. Eas
y
Start
6. POTS-Splitter
(
optional
)
4 Power Adapter
(
DC 9V
)
5. CAT-5 UTP Straight Ethernet
Network cable (RJ-45)
7. User Guide CD
ADSL Router (being SAR600E or SAR-600ER or SAR-600EW model)
Printed Quick Setup Guide
CD with extra documentation and USB drivers (SAR-600EW model)
1.8m CAT5 LAN Cable
USB cable (SAR-600EW model)
Mains power adapter
Optional ADSL Plug Splitter
Depending on your country of purchase, your package may or may not come with an ADSL POTS
Splitter. The POTS Splitter is required if you are connecting a Telephone Set to the Ethernet Modem.
If not supplied then an ADSL POTS-Splitter can also be purchased from your dealer.
Solwise Ltd Easy Start Page 4 of 33
www.solwise.co.uk
Easy Start
4 Router Overview
4.1 SAR-600E
Shows the front indicators of the SAR-600E.
3
1
2 4
1Internet
Green LED Lights up when the PPP connection is established.
LED Light off when no PPP connection.
2DSL
LED light off when no Telephone jack (RJ-11) is connected.
Flickers when the ADSL Router is trying to establish a connection with the ADSL Service
Provider (Training).
Steady Green Light when the ADSL connection is established.
3 POWER
Lights up when power is supplied to the ADSL Router.
4ETHERNET
Lights up when the Ethernet cable is properly connected from your ADSL Router to the
Ethernet Card.
Flickers when the ADSL is transmitting/receiving data.
Solwise Ltd Easy Start Page 5 of 33
www.solwise.co.uk
Easy Start
Back panel indicators of the SAR-600E.
3
1
4
2
1DSL
Telephone jack (RJ-11) to connect to your Telephone Wall Socket (DSL line).
2ETHERNET
10/100 Base-T Auto-MDI/MDIX Ethernet jack (RJ-45) to connect to your PC’s Ethernet
Network card or Ethernet Hub / Switch.
3RESET
To reset your ADSL Router to factory default settings. (All customised settings that you have
saved will be lost!). To activate the reset function: Ensure that your ADSL Router is powered on.
Use a paper clip or a pencil tip to depress the reset button, hold for at least 5secs and release.
At this point, the DSL indicator will go off showing the reset is in progress.
4 DC IN (9V)
To connect to the Power Adapter that comes with your package.
Solwise Ltd Easy Start Page 6 of 33
www.solwise.co.uk
Easy Start
4.2 SAR-600ER
Shows the front indicators of the SAR-600ER.
2 4
1 3
1 POWER
Lights up when power is supplied to the ADSL Router.
2ETHERNET (E1 ~ E4)
Lights up when the Ethernet cable is properly connected from your ADSL Router to the
Ethernet Card.
Flickers when the ADSL is transmitting/receiving data.
3DSL
LED light off when no Telephone jack (RJ-11) is connected.
Flickers when the ADSL Router is trying to establish a connection with the ADSL Service
Provider (Training).
Steady Green Light when the ADSL connection is established.
4Internet
Green LED Lights up when the PPP connection is established.
LED Light off when no PPP connection.
Solwise Ltd Easy Start Page 7 of 33
www.solwise.co.uk
Easy Start
Back panel indicators of the SAR-600ER.
45
3
2
1
1DSL
Telephone jack (RJ-11) to connect to your Telephone Wall Socket (DSL line).
2RESET
To reset your ADSL Router to factory default settings. (All customised settings that you have
saved will be lost!). To activate the reset function: Ensure that your ADSL Router is powered on.
Use a paper clip or a pencil tip to depress the reset button, hold for at least 5secs and release.
At this DSL indicator will go off showing the reset is in progress.
3ETHERNET (E1-E4)
10/100 Base-T Auto-MDI/MDIX Ethernet jack (RJ-45) to connect to your PC’s Ethernet
Network card or Ethernet Hub / Switch.
4 DC IN (9V)
To connect to the Power Adapter that comes with your package.
5 POWER SWITCH
To power on or off the modem.
I - indicates ON position
O - indicates OFF position.
Solwise Ltd Easy Start Page 8 of 33
www.solwise.co.uk
Easy Start
4.3 SAR-600EW
Shows the front indicators of the SAR-600EW.
4 6
1 2 3 5
1 POWER
Lights up when power is supplied to the ADSL Router.
2ETHERNET (E1 ~ E4)
Lights up when the Ethernet cable is properly connected from your ADSL Router to the
Ethernet Card.
Flickers when the ADSL is transmitting/receiving data.
3 WIRELESS
Flickers when the Wireless LAN is operational.
4USB
Lights up when the USB cable is properly connected from your ADSL Router to the
USB slot.
Lights Off when the USB cable is not connected or it is properly disconnected.
5DSL
LED light off when no Telephone jack (RJ-11) is connected.
Flickers when the ADSL Router is trying to establish a connection with the ADSL Service
Provider (Training).
Steady Green Light when the ADSL connection is established.
6Internet
Green LED Lights up when the PPP connection is established.
LED Light off when no PPP connection.
Solwise Ltd Easy Start Page 9 of 33
www.solwise.co.uk
This manual suits for next models
2
Table of contents
Other Solwise Network Router manuals
Solwise
Solwise SAR-600E Product information sheet
Solwise
Solwise WLn-401 User manual
Solwise
Solwise SSR725 Manual
Solwise
Solwise NET-3G-A10 User manual
Solwise
Solwise SAR715PV User manual
Solwise
Solwise 434T User manual
Solwise
Solwise 4G-54RV User manual
Solwise
Solwise SAR110 Manual
Solwise
Solwise SAR-600EW Product information sheet
Solwise
Solwise SAR-600E User manual
