Solamagic ALL IN ONE User manual

User Guide

1400 Watt ECO+ 2000 Watt ECO+

1400 Watt COMPACT 1400 Watt All In One

Solamagic Australia Pty Limited

Email info@solamagic-australia.com.au

Website www.solamagic-australia.com.au

Important Instructions:

Read the user guide carefully before installing the device. Keep the user guide and packing material.

A lamp replacement will be carried out only by the manufacturer or an authorized trained distributor.

You will find the relevant addresses at the end of the user guide.

Electrical installations and repair actions must be executed by an electrician. The heater is only allowed to be

mounted in horizontal positions.

The heater is tested and certified for wall and ceiling mounting only.

(Please consider minimum clearances when positioning your new Solamagic heater unit!)

The heater should be mounted by the use of the enclosed bracket to wall or ceiling.

The heater should be only mounted to a socket with a 10 amp fuse. Do not connect other / more

electrical equipment to that fuse!

Items for delivery

• Heater with different lamps

1400W with HeLeN lamp or

2000W with HeLeN lamp

• Bracket (in set or already mounted to the heater)

• User guide

Safety Distances

Radiated Space

(AF)

Adjusting range

(VB)

Distance to wall

(WA 1)

Distance to wall

(WA 2)

Distance to

socket (AS)

Distance to wall

(WS)

Distance to

ceiling (DA)

All units

600

30°

300

100

150

350

Please take note of this Important Safety and User Advice

before using your new Solamagic Heater

Do NOT touch the unit whilst it is operating. Surfaces maybe HOT! Risk of BURNING!

The appliance is not intended for use by young children or infirm persons without

supervision. Young children should be supervised to ensure that they do not play with the

appliance.

The devices rated with a protection rating of IP24 are suitable for indoor and outdoor use.

If you use the device in an outdoor area ensure that the radiation window is not directed

towards the sky.

Do not install the radiator directly under socket outlets, distribution boxes, switches or

electrical lines. The socket outlet should be to the side of the radiator –minimum distance

100mm. See safety distances table below.

Switch off the radiator and allow it to cool down if you want to change the direction at

which the heat is radiated.

Use a fuse of at least 10 Amp. Do not overload electrical circuits.

Do not use the radiator without the grate. Risk of burning!

Do not install the radiator near curtains or other flammable material. Observe minimum

distance, see safety distances table below.

Do not look in the “infrared lamp” directly, for a long time or from a short distance when

it is in use.

Do not use the radiator unattended.

Do not cover the device when switched on or still warm –fire danger.

To avoid risk, defective mains supply cables must only be repaired by the manufacturer,

the manufacturer’s customer service or qualified technical personnel.

Quartz radiators are susceptible to substances containing sodium. Direct skin contact

(touching with your fingers) shortens the life of the lamp and should be avoided.

If the radiator is installed in a bathroom, the switch and the controller must be out of

arm’s reach of a person in the tub or shower. Observe installation procedure.

Technical Data

Power

Connection

Protection

rating

Dimension

(mm)

Weight (kg)

Lifetime (h)

Heated Space

(m²)

SOLAMAGIC®1400W compact

230V, 50Hz~

IP 24

460x145x75

2,50

5000

10,0

SOLAMAGIC®1400W ECO+

230V, 50Hz~

IP 24

444x144x110

2.54

5000

12,0

SOLAMAGIC®2000W ECO+

230V, 50Hz~

IP 24

485x176x110

3.02

5000

16,0

SOLAMAGIC®1400W All In One

230V, 50Hz~

IP 24

810x145x75

3.00

5000

10,0

Initial operation

Operating models without switches the heat output starts instantly with connecting

the plug to the socket.

Models with switches start operation after pulling the cord or activating the toggle

switch.

Ongoing operation shall be by use of an appropriate switching assembly.

Trouble shooting/Help

Problem: The device is not working.

Models with switches start operation after pulling the cord or activating the

toggle switch (do not forget to connect the device to a socket).

Did you check your fuses? You need for a trouble-free operation a 10 Amp

fuse

Please check if the lamp itself is broken. If yes, please contact your nearest

Solamagic service agent

Problem: The device does not emit enough heat output

Double check the angle of radiation. The objects to be heated should be in

the radiated space.

Double check the distance and mounting height of the heater.

The heat output is not powerful enough. Please compare the radiated space

technical data or the following table which displays the efficiency.

Assembly

Solamagic

Ceiling mounted

Assembly height in mm

2250

No wind (0,2m/s)

100%

Slight wind (2m/s)

65%

Strong wind (4m/s)

37%

Wall mounted

Wall Mounted Height in mm

2250

Assembly angle in degrees°

20°

No wind (0,2m/s)

100%

Slight wind (2m/s)

69%

Strong wind (4m/s)

44%

Problem: The lamp does not emit heat anymore.

The typical lifetime of a HeLeN-lamp is 5000 hours

If the lifetime of the lamp has elapsed, please contact the service address,

which you will find in the Service section.

The lamp exchange of the HeLeN-lamp cannot be done yourself. The unit

must be repaired by an authorised distributor.

More SOLAMAGIC® products and accessories

You will find a range of available accessories like tripods, special brackets at:

www.solamagic-australia.com.au

Service

If your device has a defect or the lifetime of your lamp has elapsed, contact one of the

authorized service points:

This manual suits for next models

Table of contents

Other solamagic Heater manuals

solamagic

solamagic DS 02007 Quick guide

solamagic

solamagic S2 User manual

solamagic

solamagic IR 03001 Quick guide

solamagic

solamagic 500W User manual

solamagic

solamagic IR 02004 Quick guide

solamagic

solamagic IR 02004 Quick guide

solamagic

solamagic 500W User manual

solamagic

solamagic IR 05070 WSI Quick guide

solamagic

solamagic IR00035 Series User manual

solamagic

solamagic Heating Mod/Var Ramp RTS-HR1 Owner's manual

solamagic

solamagic S1 Quick guide

solamagic

solamagic S1 Quick guide

solamagic

solamagic IR 05001 Quick guide

solamagic

solamagic S1 Quick guide

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

BN Thermic

BN Thermic 830T instructions

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide

solamagic ALL IN ONE User manual

Popular Heater manuals by other brands