Snapmaker TH-L-P100-W450 User manual
10W Laser Module
MAKE SOMETHING WONDERFUL
QUICK START GUIDE
Contents
Before You Start
Machine Assembly
Laser Engraving and Cutting
Maintenance
01
15
23
37
Before You Start
2
Copyright © 2021 Snapmaker. All rights reserved.
This language version of the guide is verified by the manufacturer (Original Instruction).
No part of this publication, including pictures may be reproduced or made public,
whether by printing, photocopying, microfilm or by any other means whatsoever, without
the prior written permission of Snapmaker.
3Quick Start Guide
Ensure that anyone who uses this product knows and understands the contents of this
guide to make the most out of it. Failure to read the guide may lead to personal injury,
inferior results, or damage to the product. Snapmaker does not assume responsibility
and expressly disclaims liability for any personal injury, inferior results, or damage to the
product arising out of or in connection with your improper operations or failure to follow
the instructions of the guide.
This guide is provided for reference purposes only. Snapmaker does not in any way,
expressly or implicitly, warrant the accuracy or completeness of the information provided
by this guide. No part of this guide may be reproduced, edited, or revised by any means
without the prior written permission of Snapmaker. Snapmaker reserves the right to
modify or revise this guide at our sole discretion at any time without notice. You can
download the up-to-date version of this guide on our official website: https://support.
snapmaker.com.
When making objects using Snapmaker products, you remain responsible for no
infringement on any third-party intellectual property rights or violation of any applicable
laws or regulations. The application of Snapmaker products in making objects are
beyond the control of Snapmaker. For this reason, Snapmaker does not assume
responsibility and expressly disclaims liability for any objects made by using Snapmaker
products.
The conditions or methods used for the assembly, handling, storage, use, maintenace,
or disposal of this product are beyond the control of Snapmaker. For this reason,
Snapmaker does not assume responsibility and expressly disclaims liability for loss,
injuries, damage, or expense arising out of or in any way connected with the assembly,
handling, storage, use, maintenance, or disposal of this product. You remain responsible
for following the instructions of the guide, the applicable laws and regulations, and the
safety regulations in the assembly, handling, storage, use, maintenance, or disposal of
this product.
General Safety Information
Follow the applicable local laws and regulations in the operation and application of this
product.
Follow the instructions of the guide to use and maintain this product for safety purposes.
Always operate this product indoors on a solid horizontal table or workbench. Do not expose
1.1 Disclaimer
1.2 Safety Notes and Compliance
4
this product to rain or wet conditions.
Minors are only allowed to use this product under adult supervision and assistance.
Ensure that bystanders also read and understand all the safety notes of this product and
keep bystanders away while operating this product for safety purposes.
Stay alert, watch what you are doing, and pay attention to the surrounding environment
when operating this product. Do not use this product while you are tired or under the
influence of drugs, alcohol, or medication.
Do not reach inside the product or touch the moving parts while the product is still in
operation, as it may cause injury.
Do not leave the product unattended while it is still on.
Always unplug the power cord from the electrical outlet before performing maintenance
or modifications.
In all EU member states, the operation of 5150-5250 MHz is restricted to indoor use only.
Turn off the machine immediately and stop using this product if any of the following
occurs:
- You smell burning in this product at any point.
- You see any damage to the interior components of this product.
- The machine stops working unexpectedly.
- Unusual lights, sparks, or sounds come out of this product which has never occurred
previously.
Laser Safety Information
The 10W Laser Module is a Class 4 laser product. You should operate this product only
if you have sufficient knowledge of (i) the physical properties of laser radiation, (ii) Laser
Hazard Classes and associated health implications, and (iii) safety measures.
This product must be used together with the Enclosure released by Snapmaker or
certified partners of Snapmaker. Please follow the Quick Start Guide of the Enclosure to
install and use the Enclosure. During operation, the Enclosure helps to prevent the risk
of laser leakage by effectively filtering laser radiation and pausing the ongoing job if any
door of the Enclosure is opened.
All the users and bystanders must correctly wear the laser safety goggles released by
Snapmaker or certified partners of Snapmaker during operation. Before use, please
purchase sufficient pairs of the laser safety goggles for all the people present.
Quick Start Guide 5
An air purifier should be used depending on the type and constituent of the materials
you are going to use, as some materials may release hazardous and toxic fumes when
being laser engraved or cut. Ensure that the air purifier you choose is effective enough to
protect human health and prevent environmental pollution.
During machine operation, do not touch the laser aperture nor expose yourself to the
laser beam.
Remove any reflective material from the work area underneath the 10W Laser Module, as
it may cause scattered radiation and poses safety risks. Ensure that there is no reflective
material on the work area during operation.
Remove any inflammable and explosive material from the work area underneath the
10W Laser Module, as it may cause a fire. Ensure that there is no inflammable and
explosive material on the work area during operation.
The laser safety goggles are specially designed for
this product. However, the laser safety goggles may
not be able to provide you with effective protection
when you operate other products. Wear proper
protective equipment depending on the product you
operate. Snapmaker does not assume responsibility
and expressly disclaims liability for any personal
injury or property damage suffered by the user or
any third party from wearing this pair of laser safety
goggles to operate other products.
Information of the Laser Safety Goggles in the Parts List
The laser safety goggles block direct, reflected, and scattered laser beams and radiation
with the wavelength between 190 and 540 nanometers (nm) from entering your eyes
and have an optical density higher than 6 (OD 6+), thus providing protection while you
operate the 10W Laser Module.
The lenses might be burned when subjected to high-energy laser beams, and if this
happens, you must stop using the damaged goggles and use a new pair. The lenses are
made of polycarbonate. Avoid scraping them. Use PH neutral detergent or water to clean
them.
6
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance
of 20 cm between the radiator and your body.
ISEDC Compliance
This device complies with Innovation, Science and Economic Development Canada
License exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including inter ference that may cause undesired operation of the
device.
The device complies with RF exposure guidelines, and users can obtain Canadian
information on RF exposure compliance. The minimum distance from body to use the
device is 20 cm.
Le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes :
Table of contents
Popular Control Unit manuals by other brands
Festo
Festo Compact Performance CP-FB6-E Brief description
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Quick installation guide
JS Automation
JS Automation MPC3034A user manual
JAUDT
JAUDT SW GII 6406 Series Translation of the original operating instructions
Spektrum
Spektrum Air Module System manual
BOC Edwards
BOC Edwards Q Series instruction manual
KHADAS
KHADAS BT Magic quick start
Etherma
Etherma eNEXHO-IL Assembly and operating instructions
PMFoundations
PMFoundations Attenuverter Assembly guide
GEA
GEA VARIVENT Operating instruction
Walther Systemtechnik
Walther Systemtechnik VMS-05 Assembly instructions
Altronix
Altronix LINQ8PD Installation and programming manual
