Smith & Noble Rod User manual
Wall Mount
Step by Step Installation Instructions
Rod Mounted
Valance
12
smithandnoble.com
800.248.8888
Table of Contents
Step 1 - Getting Started (Parts & Tools) ................3
Overview - ...........................................4
Step 2 - Attaching the Brackets ......................5
Step 3 - Attaching the Valance to the Rod .............5
Step 4 - Mounting the Rod and Valance ...............6
Care & Cleaning ......................................6
Warranty ..................................Back Cover
A Smooth Set-Up
We want you to love your new Valance and that includes
having a smooth installation experience. If you encounter any
difculties or questions, please reach out to us for help. It’s why
we’re here. Call us at 800.248.8888 for more info on installation.
We recommend you hold on to all packaging until your
hardware is fully installed. Should something go wrong (we
strongly doubt it), we want any potential returns to be a
painless as possible.
Customer Service Hours
Monday — Friday: 6am — 6pm PT
Saturday — Sunday: 7am — 4pm PT
smithandnoble.com
Everything
You Need
34
smithandnoble.com
800.248.8888
Getting Started
PENCIL & SCREWDRIVER (NOT INCLUDED) POWER DRILL & LEVEL (NOT INCLUDED)
SCREWS
STEP 1 — PARTS & TOOLS
WALLBOARD OR PLASTER: Hollow wall applications: Use a secure fastener designed
specically for this purpose.
METAL: Prepare by pre-drilling holes and then using the included screws.
CONCRETE, STONE, BRICK OR TILE: Use a masonry drill and surface-specic plugs, anchors, or
screws. When selecting a fastener be sure it’s designed to support the weight of the product being
installed (if you’re not sure, either give us a call or ask a professional at your local hardware store).
Once obtained, follow the fastener manufacturer’s instructions regarding proper installation.
TOOLS YOU WILL NEED TO INSTALL YOUR HARDWARE: Pencil, screwdriver, ¼" nut driver,
level, and a drill with a 7⁄64" drill bit.
Note: It’s important to monitor the amount of pressure you apply when using a drill. If the screws
are too tight this may cause the screw itself to break off in the wall or window frame.
MOLLY
BOLT
SELF DRILLING
ANCHOR
TOGGLE
BOLT
Before you begin, check the accompanying diagram to make sure you have all the parts you need.
You’ll need to make sure the surface you intend to install your hardware is sturdy enough to
accommodate the brackets. If you’re screwing
directly into a surface this means locating wood
studs that are strong enough to securely bond
with the included screws. Otherwise, you’ll
need to use a secure fastener (as illustrated) but
please note this piece is not included.
MOUNTING & SUPPORT BRACKETS
Parts & Tools
FABRIC VALANCE
Rod Mounted
MOUNTING
BRACKET
Standard Valance
OVERVIEW
MOUNTING
BRACKET
SUPPORT
BRACKET
Parts & Tools
FABRIC VALANCE
Rod Mounted
56
smithandnoble.com 800.248.8888
STEP 2 — ATTACHING YOUR BRACKETS
Attaching the Brackets
Note the ordered width of your valance.
Extend a tape measure out to this
dimension. Center over the window,
and place a mark at zero and the width
dimension. Place the outside edge of
each mounting bracket at the desired
height and on these marks. Attach with
the screws provided. Center support is
included with wider valances only.
STEP 3 — ATTACHING THE VALANCE TO THE ROD
Attaching the Valance
to the Rod
Start at one end of the rod. Insert the
rod into the pocket in the top of the
valance. Slide the valance completely
onto the rod.
STEP 4 — MOUNTING THE ROD AND VALANCE
Mounting the Rod
and Valance
Engage the holes in the top of the rod
onto the post on the brackets. Lower
the rod down onto the brackets to
lock into place.
For valances with a center support
bracket feed bracket through pre-slit
button hole to cradle the rod.
Parts & Tools
FABRIC VALANCE
Rod Mounted
Care & Cleaning
Minimal care and cleaning is needed to maintain the beauty of your valance.
Occasional light vacuuming with a soft bristle attachment or gentle feather dusting is all
that is required to keep your valance looking fresh and neat.
CARE & CLEANING
Parts & Tools
FABRIC VALANCE
Rod Mounted
SUPPORT
BRACKET
BACK SIDE OF VALANCE
© 2020 Smith & Noble Home, Inc. All Rights Reserved SN112020
Warranty Service
The enjoyment of your valance should be everlasting, which is why our
products come with a limited lifetime warranty. The warranty applies to
the original owner, requires a proof of purchase (hang on to your receipt!)
and covers defects in material or craftsmanship. Hardware must have been
properly installed. We reserve the right to determine if your hardware
warrants a repair or a replacement. In need of warranty service? Call us at
800.248.8888 and we’ll arrange for a repair or replacement ASAP.
Other manuals for Rod
1
Table of contents
Other Smith & Noble Window Blind manuals
Smith & Noble
Smith & Noble Board User manual
Smith & Noble
Smith & Noble Skylight User manual
Smith & Noble
Smith & Noble Faux Wood Blinds User manual
Smith & Noble
Smith & Noble Motivia Motorization User manual
Smith & Noble
Smith & Noble Rod User manual
Smith & Noble
Smith & Noble Sheer Elegance User manual
Smith & Noble
Smith & Noble Metal Blinds User manual
Smith & Noble
Smith & Noble Cellular Shades User manual
Smith & Noble
Smith & Noble Metal Blinds User manual
Popular Window Blind manuals by other brands
Current
Current E-WAND Installation manual and user's guide
weinor
weinor VertiTex ZipR Maintenance Instructions and Directions for use for the end user
Roto
Roto ZAR M R4/R7 Mounting instructions
SOMFY
SOMFY Movelite WT Series instructions
Acmeda
Acmeda RF400 Series instructions
Motura
Motura Pli_353/3 manual