Smeg KTS75 User manual
Libretto d’istruzioni
Instruction manual
Mode d’emploi
Gebrauchsanweisung
Manual de instrucciones
Instruções de instala ção
Gebruiksaanwijzingen
Bruksanvisning
KTS75/KTS75C
Installation of glass panels
EN
01
Glass removal
To remove the glass panels, follow the procedure in the reverse order.
EN
02
Take the two 200x750 hood glass panels out
of the box.
Remove them from the box with care.
Open the hood upper glass panel (Fig.1).
Take the glass panel with the SMEG
logo close to the hood and centre the
four hinges in their seats (Fig.2).
Fig.3.1 -Initial position
(Pins high)
Fig.3.2 -Final
position
(Pins down)
Fig.1
Fig.2
Fig.3
Let the glass panel slide downwards
along the pin guides (Fig.3.2).
Get the glass panel with no logo and
place it near the hood 2, centre the
four pins in the remaining four hood
seats (Fig.4).
(2) For proper positioning, check the position of
the metal frame on the back (Fig.4.1).
Let the glass panel slide along the
pin guides (Fig.5 and Fig.3.2)
Fig.4
Fig.5
Fig.4.1 –Rear
view.
Removal of filter panels
EN
03
NB.: To remove the upper panel pair, remove the glass panels as described on page 2 .
EN
04
Fig.5
To remove the filters, use the
key included in the supply
(Fig.5).
Insert the key prongs in the holes on
the upper central part of the panel
(Fig.7).
Fig.6
Fig.7
Place the key as shown in Fig.6.
Fig.8
Fig.9
Pull the panels up
to remove them
(Fig.9).
Turn the key downwards
and pull (Fig.8).
Installation of the filter panels
EN
05
Adjustment of glass-closed position
EN
06
Fig.10
Take the panels close to the hood.
Insert the filter pins in the seats as
shown in Fig.10
Rotate the panels and take them
close to the hood (Fig.11 and
Fig,12).
Fig.11
Fig.12
Adjust the glass closed position after installing the hood.
Adjust the closing position of the glass by loosening/tightening the
adjustment screws.
Adjust the LH and RH sides.
Use a size-3 Allen key for the adjustment (Fig.13).
Fig.13
Installation instructions
EN
07
a) Fix the hood in the center over the hob;
b) Maintain the distances shown at fig. 14 and fig. 15.
Fig.14 Fig.15
Height of the
holes for the
bracket
Reference
height for the
center of the
exhaust hole
Level of the
hob
This manual suits for next models
6
Table of contents
Other Smeg Ventilation Hood manuals
Smeg
Smeg KSIV960X1 Technical manual
Smeg
Smeg PASC7801FPX User manual
Smeg
Smeg SA520TX90 User manual
Smeg
Smeg KBT9L4VN Technical manual
Smeg
Smeg KSET900X Technical manual
Smeg
Smeg ZHV64750BA User manual
Smeg
Smeg SA940CXA Instruction Manual
Smeg
Smeg KSE 61X User manual
Smeg
Smeg SA520TX60 User manual
Smeg
Smeg KI1207X Technical manual
