Smeg KDD90VXBE User manual

Libretto di Istruzioni
Instructions Manual
Manuel d’Instructions
Bedienungsanleitung
Gebruiksaanwijzing
KDD90VXE-2

2
2
INDICE
CONSIGLI E SUGGERIMENTI.............................................................................................................................................. 3
CARATTERISTICHE.............................................................................................................................................................. 6
INSTALLAZIONE ................................................................................................................................................................... 8
USO...................................................................................................................................................................................... 18
MANUTENZIONE ................................................................................................................................................................ 20
INDEX
RECOMMENDATIONS AND SUGGESTIONS ................................................................................................................... 22
CHARACTERISTICS ........................................................................................................................................................... 25
INSTALLATION.................................................................................................................................................................... 27
USE ...................................................................................................................................................................................... 37
MAINTENANCE................................................................................................................................................................... 39
SOMMAIRE
CONSEILS ET SUGGESTIONS.......................................................................................................................................... 41
CARACTERISTIQUES......................................................................................................................................................... 44
INSTALLATION.................................................................................................................................................................... 46
UTILISATION ....................................................................................................................................................................... 56
ENTRETIEN......................................................................................................................................................................... 58
INHALTSVERZEICHNIS
EMPFEHLUNGEN UND HINWEISE ................................................................................................................................... 60
CHARAKTERISTIKEN......................................................................................................................................................... 63
MONTAGE ........................................................................................................................................................................... 65
BEDIENUNG........................................................................................................................................................................ 75
WARTUNG........................................................................................................................................................................... 77
INHOUDSOPGAVE
ADVIEZEN EN SUGGESTIES............................................................................................................................................. 79
EIGENSCHAPPEN .............................................................................................................................................................. 82
INSTALLATIE....................................................................................................................................................................... 84
GEBRUIK ............................................................................................................................................................................. 94
ONDERHOUD...................................................................................................................................................................... 96
IT
EN
FR
DE
NL

EN 2
22
RECOMMENDATIONS AND SUGGESTIONS
The Instructions for Use apply to several versions of this appliance.
Accordingly, you may find descriptions of individual features that do not
apply to your specific appliance.
INSTALLATION
•The manufacturer will not be held liable for any damages resulting from
incorrect or improper installation.
• The minimum safety distance between the cooker top
and the extractor hood is 650 mm (some models can
be installed at a lower height, please refer to the
paragraphs on working dimensions and installation).
• Check that the mains voltage corresponds to that
indicated on the rating plate fixed to the inside of the
hood.
• For Class I appliances, check that the domestic
power supply guarantees adequate earthing.
Connect the extractor to the exhaust flue through a pipe of minimum
diameter 120 mm. The route of the flue must be as short as possible.
• Do not connect the extractor hood to exhaust ducts carrying combustion
fumes (boilers, fireplaces, etc.).
• If the extractor is used in conjunction with non-
electrical appliances (e.g. gas burning
appliances), a sufficient degree of aeration must
be guaranteed in the room in order to prevent the
backflow of exhaust gas. The kitchen must have
an opening communicating directly with the open
air in order to guarantee the entry of clean air.
When the cooker hood is used in conjunction with
appliances supplied with energy other than electric, the negative pressure in
the room must not exceed 0,04 mbar to prevent fumes being drawn back
into the room by the cooker hood.
• In the event of damage to the power cable, it must be replaced by the
manufacturer or by the technical service department, in order to prevent any
risks.
2°

EN 2
23
• If the instructions for installation for the gas hob specify a greater distance
specified above, this has to be taken into account. Regulations concerning
the discharge of air have to be fulfilled.
• Use only screws and small parts in support of the hood.
Warning: Failure to install the screws or fixing device in accordance with
these instructions may result in electrical hazards.
• Connect the hood to the mains through a two-pole switch having a contact
gap of at least 3 mm.
• This Cooker hood can be used in conjunction with a Gas Cook Top having
the following characteristics:
• Maximum power 12,4 kW
• 5 fire like the picture
USE
•The extractor hood has been designed exclusively for domestic use to
eliminate kitchen smells.
• Never use the hood for purposes other than for which it has been designed.
• Never leave high naked flames under the hood when it is in operation.
• Adjust the flame intensity to direct it onto the bottom of the pan only, making
sure that it does not engulf the sides.
• Deep fat fryers must be continuously monitored
during use: overheated oil can burst into flames.
• Do not flambè under the range hood; risk of fire.
• This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
2,6 kW
5 kW
1,9 kW
1,9 kW
1 kW

EN 2
24
•“CAUTION: Accessible parts may become hot when used with cooking
appliances.”
MAINTENANCE
•Switch off or unplug the appliance from the mains supply before carrying out
any maintenance work.
• Clean and/or replace the Filters after the specified time period (Fire hazard).
• The Grease filters must be cleaned every 2 months of operation, or more
frequently for particularly heavy usage, and can be washed in a dishwasher.
• The Activated charcoal filter is not washable and cannot be regenerated,
and must be replaced approximately every 4 months of operation, or more
frequently for particularly heavy usage.
• "Failure to carry out cleaning as indicated will result in a fire hazard".
• Clean the hood using a damp cloth and a neutral liquid detergent.
The symbol on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or
the shop where you purchased the product.

EN 2
25
CHARACTERISTICS
Components
Ref. Q.ty Product Components
11 Hood Canopy complete with: Controls, Light, Filters
21 Motor unit
31 Electric unit
41 Front Frame
Ref. Q.ty Installation Components
7.1 2 Splashback Fixing Bracket
7.2 2 Hob Fixing Bracket
7.3 2 Side Bracket
12a 16 Screws 3.5 x 9.5
12b 6 Screws M4 x 8
12c Screws 4 x 15
Q.ty Documentation
1 Instruction Manual

EN 2
26
Dimensions
512 - 794
520 - 802
537 - 880
537 - 880
512 - 794
520 - 802

EN 2
27
INSTALLATION
This Hood is set up to be fitted inside the kitchen unit in:
•Ducting version: Evacuation to the outside.
•Recirculation version: Internal recirculation.
Sequence of operations - Installation
• Drilling the Support Surface and Fitting the Hood
• Connections
• Functional Check
• Disposal of Packaging
Drilling the Support Surface
109
527 - 812
IMPORTANT
The minimum distance between the opening for the hob and the one for the hood must be of at
least 3-5 cm according to the strength of the material used for the working top.

EN 2
28
7.2
12a
7.2
12a
A
Inserting the Hood Canopy into the support surface from below
• The Hood is built ready for
front installation of the Mo-
tor Unit.
• If the kitchen unit is arranged differently and the Motor Unit has to be
fitted on the back, the Plug already fitted on the back of the Hood Can-
opy must be removed and replaced at the front, and the Cable with cable
raceway for connection of the Motor must also be repositioned using the
slot provided on each side (A).
Before proceeding, the Motor Unit must be fixed to the Hood Canopy
(see paragraph on Fixing the Motor Unit).
• Insert the Hood Canopy
from below into the
support worktop, drilled
as described above.
• With the aid of a sup-
port, lift the Hood Can-
opy until the front
comes out of the Work-
top.
• Insert the Brackets 7.2, as indicated in the
figure, into the slots provided and fix them
with the screws 12a provided.
• Centre the Hood Canopy with respect to the
Cooking Hob slot.
• Using the 2 screws 12c provided, fix the
Hood Canopy to the worktop and remove
the supports.
Warning:
If the cooker top is made from a material that does not allow the screws 12c to be inserted, use
a small amount of silicone to glue the Brackets 7.2 to the top and allow it to dry completely
b
efore
p
roceedin
g
with installation

EN 2
29
Inserting the Hood Canopy into the support surface from above
• Insert the Brackets 7.2, as indi-
cated in the figure, into the slots
provided and fix them with the
screws 12a provided.
• The Hood is built
ready for front in-
stallation of the
Motor Unit.
• If the kitchen unit is arranged differently and the Motor Unit
has to be fitted on the back, the Plug already fitted on the back
of the Hood Canopy must be removed and replaced at the front,
and the Cable with cable raceway for connection of the Motor
must also be repositioned using the slot provided on each side
(A).
• Insert the Hood Canopy into the cooker top,
drilled as described above.
• Centre the Hood Canopy with respect to the
Cooking Hob slot.
• Fix the Hood Canopy with the 2 screws 12c
provided.
Warning:
If the cooker top is made from a material that does not allow the screws 12c to be inserted, use
a small amount of silicone to glue the Brackets 7.2 to the top and allow it to dry completely
before proceeding with installation.
7.2
12a
7.2
12a
This manual suits for next models
3
Table of contents
Other Smeg Ventilation Hood manuals

Smeg
Smeg KIV90XT-1 User manual

Smeg
Smeg KSEC60EB Technical manual

Smeg
Smeg Hood SED908EB User manual

Smeg
Smeg SHR900X User manual

Smeg
Smeg KSEG54X User manual

Smeg
Smeg KSET66 User manual

Smeg
Smeg KD90 series User manual

Smeg
Smeg KSEV96X User manual

Smeg
Smeg KSEI60S Technical manual

Smeg
Smeg KASC505 User manual

Smeg
Smeg KIT1A3-6 User manual

Smeg
Smeg KD User manual

Smeg
Smeg SHW935X User manual

Smeg
Smeg SHB900SS User manual

Smeg
Smeg KV26 User manual

Smeg
Smeg KSET6X User manual

Smeg
Smeg SA550-1X60 User manual

Smeg
Smeg Dolce&Gabbana Divina Cucina User manual

Smeg
Smeg PASC7801FPX User manual

Smeg
Smeg KSET610X User manual





















