Smeg SE 995 User manual
31
Contents
INSTRUCTIONS FOR THE USER: these contain user advice, the
description of the controls and the correct procedures for cleaning and
maintenance of the appliance.
INSTRUCTIONS FOR THE INSTALLER: these are intended for the
qualified technician who must install the appliance, set it functioning and
carry out an inspection test.
Further information about the products can be found at
www.smeg.com
@
1 INSTRUCTIONS FOR USE.............................................. 32
2 SAFETY PRECAUTIONS................................................. 34
3 INSTRUCTIONS FOR SAFETY AND USE ...................... 36
4 INSTALLATION ................................................................ 37
5 DESCRIPTION OF CONTROLS ...................................... 39
6 USING THE OVEN........................................................... 45
7 AVAILABLE ACCESSORIES ........................................... 47
8 COOKING HINTS............................................................. 48
9 CLEANING AND MAINTENANCE ................................... 54
10 EXTRAORDINARY MAINTENANCE ............................... 56
32
Instructions for safety and use
1. INSTRUCTIONS FOR USE
This manual is an integral part of the appliance and must therefore be kept
in its entirety and in an accessible place for the whole working life of the
appliance.
We recommend reading this manual and all the information it contains
carefully before using the appliance. Installation must be carried out by
qualified personnel in accordance with the standards in force. This
appliance is intended for domestic use and conforms to the EEC directives
currently in force. The appliance has been built to carry out the following
function: cooking food; all other uses are considered unsuitable.
The manufacturer declines all responsibility for uses other than those
indicated.
This appliance has been manufactured to cook food, do not use the
appliance to heat rooms.
This appliance is marked according to European directive 2002/96/EC on
Waste Electrical and Electronic Equipment (WEEE).
This directive defines the standards for the collection and recycling of waste
electrical and electronic equipment applicable throughout the European
union.
Do not obstruct ventilation openings and heat dispersal slots.
Do not rest any weight or sit on the open door of the appliance.
The identification plate bearing the technical data, serial number and brand
name is visibly positioned on the appliance.
Do not remove this plate for any reason.
Before the appliance is put into operation, all protective films applied inside
or outside must be removed.
Take care that no objects are stuck in the door of the oven.
33
Instructions for safety and use
The appliance becomes very hot during use. Suitable heat-proof gloves
should be worn for all operations.
Do not use metallic sponges or sharp scrapers: they will damage
the surface.
Use ordinary non-abrasive products, with the aid of wooden or
plastic utensils if necessary. Rinse thoroughly and dry with a soft
cloth or chamois leather.
Do not allow residues of sugary foods (such as jam) to set inside
the oven. If left to set for too long, they might damage the enamel
lining of the oven.
Do not use plastic kitchenware or containers. The high temperatures inside
the oven could melt the plastic, damaging the appliance.
Do not use sealed tins or containers in the appliance. Overpressure may
occur inside the containers during cooking, creating a danger of explosion.
Do not leave the appliance unattended during cooking operations where
fats or oils could be released.
Fats and oils may catch fire.
Do not cover the bottom of the oven with aluminium or tin foil sheets during
cooking and do not place pans or trays on it to avoid damage to the
enamelled surface.
If the surfaces are still very hot during cooking, do not pour water directly
onto the trays. The steam could cause severe burns and damage
enamelled surfaces.
All cooking operations must take place with the door closed.
34
Instructions for safety and use
2. SAFETY PRECAUTIONS
Consult the installation instructions for safety standards on electrical or gas
appliances and for ventilation functions.
In your interests and for your safety the law requires that the installation and
servicing of all electrical and gas appliances be carried out by qualified
personnel in accordance with the standards in force.
Our approved installers guarantee a satisfactory job.
Gas or electrical appliances must always be uninstalled by suitably skilled
people.
Before connecting the appliance to the power grid, check the data on the
plate against the data for the grid itself.
Before carrying out installation/maintenance work, make sure that the
appliance is disconnected from the power grid.
When linking up to the power supply network by plug:
The plug to be connected to the power supply cable and its socket must be
of the same type and conform to the standards in force.
The socket must be accessible after the appliance has been built in.
Never disconnect the plug by pulling on the cable.
If the power supply cable is damaged, contact the technical support service
immediately and they will replace it.
The appliance must be connected to earth in compliance with electrical
system safety standards.
Immediately after installation, carry out a quick test on the appliance
following the instructions provided later in this manual. Should the appliance
not function, disconnect it from the power supply and call the nearest
technical assistance centre.
Never attempt to repair the appliance.
Do not use or leave flammable materials near the appliance or in the food
warming compartment.
The appliance becomes very hot during use. Take care never to touch the
heating elements inside the oven.
35
Instructions for safety and use
This appliance must not be used by people (including children) of reduced
physical and mental capacity, or lacking in experience in the use of electrical
appliances, unless they are supervised or instructed by adults who are
responsible for their safety.
Do not let children go near the appliance when it is in operation or play with
it at any time.
Do not insert pointed metal objects (cutlery or utensils) into the slots in the
appliance.
If the appliance is installed on caravans or boats, it must not be used to heat
rooms.
Do not use steam jets for cleaning the appliance.
The steam could reach the electronics, damaging them and causing short-
circuits.
Do not modify this appliance.
Do not spray any spray products near the household appliance while it is in
operation.
Do not use spray products while the product is still hot.
The manufacturer declines all responsibility for damage to persons or things
caused by non-observance of the above prescriptions or by interference
with any part of the appliance or by the use of non-original spare parts.
36
Instructions for disposal
3. INSTRUCTIONS FOR SAFETY AND USE
3.1 Our environmental care
Pursuant to Directives 2002/95/EC, 2002/96/EC, 2003/108/EC, relating to the
reduction of the use of hazardous substances in electrical and electronic
appliances, as well as to the disposal of refuse, the crossed out bin symbol on
the appliance indicates that the product, at the end of its useful life, must be
collected separately from other refuse. Therefore, the user must consign the
product that has reached the end of its working life to the appropriate selective
collection centres for electrical and electronic refuse, or deliver it back to the
retailer when purchasing an equivalent product, on a one for one basis. Adequate
selective collection for the subsequent forwarding of the decommissioned
product to recycling, treatment and ecologically compatible disposal contributes
to avoiding possible negative effects on the environment and on health and
promotes the recycling of the materials of which the appliance consists. The illicit
disposal of the product by the user results in the application of administrative
sanctions.
The product does not contain substances in quantities sufficient to be considered
hazardous to health and the environment, in accordance with current European
directives.
3.2 Your environmental care
Our product's packaging is made of non-polluting materials, therefore compatible
with the environment and recyclable. Please help by disposing of the packaging
correctly. You can obtain the addresses of collection, recycling and disposal
centres from your retailer or from the competent local organisations.
Do not discard the packaging or any part of it, or leave it unattended. It can
constitute a suffocation hazard for children, especially the plastic bags.
Your old appliance also needs to be disposed of correctly.
Important
: hand over your appliance to the local agency authorised for the
collection of household appliances no longer in use. Correct disposal enables
intelligent recovery of valuable materials.
Before disposing of your appliance it is important to remove doors and leave
shelves in the same position as for use, to ensure that children cannot
accidentally become trapped inside during play. It is also necessary to cut the
connecting cable to the power supply network, removing it along with the plug.
37
Instructions for the installer
4. INSTALLATION
4.1 Electrical connection
Make sure the voltage and the cross-section of the power cord match the
specifications indicated on the identification plate positioned on the frame
of the oven door. Do not remove this plate for any reason.
The appliance must be earthed in compliance with electrical system
safety regulations.
If a plug and socket connection is being used, make sure that the plug
and socket are compatible. Avoid use of adapters and shunts as these
could cause overheating and risk of burns.
If a fixed connection is being used, fit the power line with an omnipolar
circuit breaker with a contact opening gap equal to or greater than 3 mm,
in an easily accessible position close to the appliance.
For operation on 220-240V
∼
:use a
H05RR-F / H05V2V2-F type three-core
cable (3 x 1.5 mm2).
The cable end to be connected to the
appliance must be provided with a ground
wire (yellow-green) at least 20 mm longer.
The manufacturer declines all responsibility for damage to persons or
things caused by non-observance of the above prescriptions or by
interference with any part of the appliance.
38
Instructions for the installer
4.2 Positioning the oven
The oven is designed for mounting into any piece of furniture as long as it
is heat-resistant. Proceed according to the dimensions shown in Figures 1
and 2.
Fasten using the 4 screws at the
corners “C” of the oven door frame,
after having removed the side panels
fastened by screws “A” and by
supports “B” as shown in figure 3. To
refit the side panels, ensure the pins
inside them are correctly fitted into the
supports “B”, then tighten the screws
“A”. 3.
Never use the oven door to lever the oven into
place when fitting.
Avoid exerting too much pressure on the oven door
when open.
39
Instructions for the user
5. DESCRIPTION OF CONTROLS
5.1 Front panel
All the oven controls are grouped together on the front panel.
FUNCTION SELECTOR
KNOB
Turn the knob in either
direction to select a
function from the
following:
FUNCTIONS (on some models only)
NO FUNCTION SELECTED GRILL ELEMENT + VENTILATION
UPPER AND LOWER HEATING
ELEMENTS
UPPER AND LOWER HEATING
ELEMENTS + VENTILATION
LOWER HEATING ELEMENT DEFROSTING (NO HEATING
ELEMENT ENABLED)
WIDE GRILL ELEMENT
12 30
A
12
0
60
90 30
6
11
5
10
4
93
8
2
7
1
50
100
150
250
200
40
Instructions for the user
FUNCTIONS (on some models only)
NO FUNCTION SELECTED GRILL ELEMENT + VENTILATION
UPPER AND LOWER HEATING
ELEMENTS
UPPER AND LOWER HEATING
ELEMENTS + VENTILATION
LOWER HEATING ELEMENT DEFROSTING (NO HEATING
ELEMENT ENABLED)
WIDE GRILL ELEMENT
FUNCTIONS (on some models only)
NO FUNCTION SELECTED CIRCULAR HEATING ELEMENT +
VENTILATION + LOWER HEATING
ELEMENT
UPPER AND LOWER HEATING
ELEMENTS
CIRCULAR HEATING ELEMENT +
VENTILATION
WIDE GRILL ELEMENT UPPER AND LOWER HEATING
ELEMENTS + VENTILATION
SMALL GRILL ELEMENT LOWER HEATING ELEMENT +
VENTILATION
GRILL ELEMENT + VENTILATION
THERMOSTAT KNOB
The cooking temperature is
selected by turning the knob
clockwise to the required
setting, between 50°C and
250°C.
THERMOSTAT LIGHT
The indicator light comes on to indicate that the oven is
heating up. When it goes out, the preset heating
temperature has been reached.
When the light flashes regularly, it means that the
temperature inside the oven is kept constantly on the set
level.
50
90
120
160
200
250
230
This manual suits for next models
4
Table of contents
Other Smeg Oven manuals
